WHX?? 55,385 #26 Posted 9 hours ago (edited) On to the rear ... yep gonna need help on this. The pawls are missing on both sides and one pawl hub is boogered up royally. It's not a hard thing to reproduce on a lathe but I have no idea what the pawls or springs or pins even look like. I'll be down in the basement researching old threads anybody needs me ... Edited 9 hours ago by WHX?? 1 Share this post Link to post Share on other sites
WHX?? 55,385 #27 Posted 8 hours ago (edited) Yup I'm screwed ... somebody must have replaced the axle at one time. Digging in the basement I found pics of the axle where there are keyways cut in the axle to secure the pawl hub to the axle using a #15 woodruff. I do not have those keyways and was wondering why there are keyways cut in the pawl hub. There is a hole in the right side where I believe the hub was PO through bolted. The other side just free wheeled. I also noticed the snap ring grooves that hold the hub on are spaced at different lengths & no idea if that is correct. Not sure how to proceed here gonna have to burn a shout out. @rj35hunter Lots of questions here Clay. Edited 8 hours ago by WHX?? Share this post Link to post Share on other sites
squonk 45,666 #28 Posted 1 hour ago On 1/2/2025 at 10:53 AM, WHX?? said: I been into pirate things lately can you tell?? I have no idea why ... too many episodes of Black Sails me thinks ... but can't wait for @rmaynard 's talk like a Pirate day... Ok 'nuff sitting around in my knickers typeing ... time to get to the shop get the TV out there fired up... Lordy it's great to be retired ... Watchin too much TV in the shop! Talkin like a Pie-Rate. I guess we know what you watch out there! Share this post Link to post Share on other sites
