Home made snowplow frame and plowblade

[Lars 526]

Hi Guys

Me and my brother has just started and create frame to a snow plow as it is impossible to get one like that here in Norway

so I post some pictures here ..

More pictures etc. coming soon .. :thumbs2:

[stevebo-(Moderator) 8,041]

Lots of work !! Looks great you must really like fabrication!

[CasualObserver 3,406]

I'm moving this out of the gallery so members (other than mods) can comment on it. Excellent work, looking forward to more.

[SousaKerry 500]

Looks good so far I had made a new blade for one a few years back. I'll give you a hint the radius of the plow is 15" IIRC. We have a Hossfeild bender at the shop, I was able to bend angle iron to the radius and just started clamping and tack welding the sheet metal as I went along. It actually worked out very well.

[darren 49]

Nice fabrication. That's going to look great when it's finished, If you need any more measurements, just let me know, Id be happy to get the tape measure out and pop out to the garage.

Keep the pictures coming!

[Anglo Traction 759]

Most impressive . It is also cheaper to have one made here in UK, rather than pay the money they sell for when they rarely come up for sale.

I only wish I had the equipment and facilities to do what yoiu are doing. :banghead:

[rexman72 210]

good job guys

[Lars 526]

Thanks for the comment's guys..

it's funny to create it hope it will work too

some uppdates on the parts..

[condo630 6]

Hey! That looks neat! Nice work! :thumbs2:

[earlleecliffton 37]

:thumbs2:

[speedyleedy 205]

thats a very nice looking plow your making, good job :banghead:

[NF-Tinman 2]

:banghead: Nice Job

[Lars 526]

some uppdate pict

have made ​​the turn and release the blade in the shaft ..

Alomst ready for painting

now i have startet welding on the plow

[SaeS 1]

:thumbs2: ooh .. I know the frame and garage ... oh yes it was with my brother as I am with and make it together .. I'm excited to finish it so it can snow comes soon so we'll try it:)

[Lars 526]

Hello..

a new uppdate.

now im almost ready for painting..

just need to make some small canges on the releascabel to the turn system.. :thumbs2:

[meadowfield 2,545]

looking great!

well done

[Rooster 191]

How do you release the lock pin?

Nice Project! :thumbs2:

[Lars 526]

How do you release the lock pin?

Nice Project!

thanks Rooster..

I have used a bike cable to the trigger, and handle of bike ..

It works really really well

[Lars 526]

some uppdate pict.

Have rust treated frame and plow blade

next step is painting.. but can not and decide for the color .. red, black, silver, etc..

difficult to find red to match the tractor ..

[Raider12 13]

Now that is a really nice job. Plan well thought through and executed! :thumbs2:

[Lars 526]

Now that is a really nice job. Plan well thought through and executed!

Thanks..

yes I have my hours of thinking .. on how to fix things, etc.. frame and it was good I think .. but are not completely satisfied with snowplow .. think I'll make one that is slightly more curved .. 'll see how it works first ...

[Lars 526]

had to have the wheel weights also ... weight on these is 25 kg/55lbs

[Coadster32 793]

:banghead: Awesome fab job!! :banghead:

[chazm 412]

You guys from Norway have mad skills Excellent job

Chaz :banghead:

[Lars 526]

Here are som uppdates pict..

Thanks for all the nice comments .. and help

It has been great fun and a lot of thinking to get it. But finally I'm done with it. Only a few minor adjustments and I'm done

changed the oil on the engine and axle. and given it a service. now it's ready for the winter.

so now im only waiting on the snow :thumbs2: