Big_Red_Fred 1,547 #1 Posted August 13, 2017 Does anyone know the part # for the Kohler fuel pump in the Metal housing ? I did get some of those plastic ones but theres a Heck of a lot of heat up there & sure dont need gas spraying the exhaust, sorry dont wanna be a REAL RED FRED if you no what i mean, And a rebuild kit number too, thanks Fellow nuts Share this post Link to post Share on other sites
Racinbob 10,278 #2 Posted August 13, 2017 You can get rebuild kits here: http://www.then-now-auto.com/product-category/fuel-pump-kits/kohler-fuel-pump-kits/ 4 1 Share this post Link to post Share on other sites
953 nut 51,712 #3 Posted August 13, 2017 I have replaced a couple of mine with electric pumps, cost less than $ 20.00 and work great. For a faithful restoration I would stick with an OEM Kohler pump, but for a worker or play time electric is the way to go. 6 1 Share this post Link to post Share on other sites
roadapples 6,981 #4 Posted August 13, 2017 @953 nut $20 ? What do you use? Thanks Share this post Link to post Share on other sites
953 nut 51,712 #5 Posted August 13, 2017 7 minutes ago, roadapples said: @953 nut $20 ? What do you use? Thanks http://www.ebay.com/itm/2-Pcs-12V-Low-Pressure-Electric-Fuel-Pump-Diesel-Gas-Fuel-Oil-for-Universal-car-/182455270871?epid=1168843192&hash=item2a7b2e7dd7:g:8EcAAOSwWxNYo0qn&vx 6 1 1 Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #6 Posted August 13, 2017 So obviously id hook to ignition correct ? Electric pump that is . @953 nut Share this post Link to post Share on other sites
pfrederi 17,147 #7 Posted August 13, 2017 I hook mine to the acc terminal. Turn the ignition to run for a few seconds you will here the pump and it changes sound after the float valve closes. The turn to start and off you go. 4 Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #8 Posted August 13, 2017 I ordered the 2 pack for 16, thanks buddy, tho i will get rebuild kits to, need 2 of them, Thanks RacinBob for parts site, i wrote it down, i dont no how to copy & paste LOL @Racinbob @pfrederi Thanks for advice , i was suppose to come to Allentown today, was going after that 518H, then my son needed truck, think i lost my chance, 385.00 Just to Let you all know, the C125 is coming along Fine on resto, I will post pic's soon, hope i did it right, Hey 953 i need sum Fuzzy Dice above steering wheel Share this post Link to post Share on other sites
TravelinJavelin 620 #9 Posted August 13, 2017 3 hours ago, 953 nut said: I have replaced a couple of mine with electric pumps, cost less than $ 20.00 and work great. For a faithful restoration I would stick with an OEM Kohler pump, but for a worker or play time electric is the way to go. that's great to know thanks for this info! Share this post Link to post Share on other sites
953 nut 51,712 #10 Posted August 13, 2017 2 hours ago, Big_Red_Fred said: i need sum Fuzzy Dice above steering wheel Going to hang them off the rear view mirror, right! 1 Share this post Link to post Share on other sites
ACman 7,507 #11 Posted August 13, 2017 2 hours ago, Big_Red_Fred said: I need sum Fuzzy Dice above steering wheel Me being a true red neck I use a raccoon tail . 3 2 2 Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #12 Posted August 14, 2017 Man i'm Jealous now, hey there goes Pepe LApoo , that may top you LOL, but 953 got us both with that scrawny bear, How bout it Tigger ! @953 nut @ACman 1 Share this post Link to post Share on other sites
Racinbob 10,278 #13 Posted August 14, 2017 I just ordered a couple of those electric pumps too. If my 2005 sits a few days I have to crank it some to get fuel back to the carb. It was never a problem living in Florida but I think it might be this winter now that we are back in Indiana. I'll connect it to the 'run' terminal. 4 Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #14 Posted August 16, 2017 @ACman Your work bench looks like mine at my shop, Hmmm, how did Clint Eastwood put it in Heart Break Ridge ? Cluster WHAT, did i just think that, i didnt think that ? LOL Share this post Link to post Share on other sites
ACman 7,507 #15 Posted August 16, 2017 The sad thing is this quadriplegic didn't do any of it but it seems that I'm the only one who knows where things are . Figure that one out ? 3 Share this post Link to post Share on other sites
WHX?? 46,783 #16 Posted August 16, 2017 @Achto any comments on the coon tail? 3 Share this post Link to post Share on other sites
Achto 26,563 #17 Posted August 16, 2017 Coon tail looks great @ACman. I need to get another one for my rat rod, mine fell a part.😞 Might try to get a big whip antenna to mount the new one on.😀 3 Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #18 Posted August 16, 2017 Hey were all Garager's ! My new mechanic said Pap, we gonna clean this mess up, he collects old Craftsman tractors, he's the one who sold me the C125 for 200, said horses are over priced, LOL, i said more like Quality ! Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #19 Posted August 16, 2017 Do they make a complete rebuld kit for Kohler carbs, every thing ? @ACman @Achto @953 nut @TravelinJavelin @WHX12 @Racinbob @roadapples Share this post Link to post Share on other sites
953 nut 51,712 #20 Posted August 17, 2017 30 minutes ago, Big_Red_Fred said: complete rebuld kit Depends on what you mean by complete, If you mean with a float and adjustment needles, you would be better off to buy one of the aftermarket replacement units from eprdistribution on for about $ 35.00. Several of use have them and I am pleased with mine. Be sure the choke linkage is the same as yours. Share this post Link to post Share on other sites
Big_Red_Fred 1,547 #21 Posted August 17, 2017 Ok thanks, having issues again, the needle bearing under float doesnt have a catch on it, floods engine with gas, its that walbro i got from a raider 12 Share this post Link to post Share on other sites
TravelinJavelin 620 #22 Posted August 17, 2017 hey fred i'll send you a P/M Share this post Link to post Share on other sites