Search the Community
Showing results for tags 'oil'.
Found 4 results
-
Hello all - New to the site, just brought home an '87 310-8 '86 312-A yesterday. So far, no start, no crank no click. For now please consider what it means when I hold the test switch and see all lamps lit except for the oil lamp which is blinking. Regarding that blinking can someone tell what that should tell me? Any other comments about what to expect form the lamps would be helpful. Page 5 of Tractor_1986_200-300-400_OM_810399R1.pdf mentions the lights but I'm not seeing it addresses what the blinking means in this case. Thanks all!
-
I have an oil leak on my Kohler CH22 in my Toro 522XI (see video). I put in new head gaskets to remedy low compression. Then upon first start i had a large oil leak. It seemed to come from the aft oil seal. So i pulled the engine again and replace the seals. I re-installed the engine again today and the leak is still there. This is the leak now: https://youtu.be/pi382fXVXPQ What could cause it? I did blow out the air line from the fuel pump with compressed air into the crank case to clan out any debris. Could that have caused a leak this bad on the oil pan gasket? or another location? thank you all in advance!
-
Oil Sandwich adapters for Cooling Hydro and Engine oils
DarrellF posted a topic in Transmissions and transaxles
Just bought a D200 in great shape wanted to do some mods for cooling hydro and engine oils Ive used sandwich adapters on motor home and to install transmission coolers and engine coolers with new gauges, Seems to me would not be a problem to install on transmission of tractor from what I've read filters are 3/4 unf 16 thread anyone ever done this before? Also easy way to install temp gauge,oil pressure gauges any gauge ya wanted plus external cooling.
