Leaderboard

Hi all, I'm new here. See pictures of a 1977 B-100 Wheel Horse that I grew up with. My dad bought this brand new when we moved to a farm in 1975. It has been through 3 of us sons, mowed a hell of alot of grass and I even made a snow blade/pusher out of 2 pieces of 5" channel welded on top of each other that bolted to the back of the hitch of this fine machine along with a set of snow chains. Did a great job. The old Kohler engines are monster tough. This is is going to be my winter restore project. Still runs great. I have been bitten by the wheel horse bug. I am having a tough time finding the rear tires though. 22 x 7.50-12. Any alternatives?

Now ive built the tractor and tested it and happy with the way it works i'm going to pull it down and repaint it. here's some photos of the progress. And a few more.

I got a little seat time this morning - 4 inches of wet snow, about half of that on driveway. Wow that light bar is bright!

Couldn't get the video to play, but enjoyed the Little Tractor Co; wonder if they built any of these?

Here's some more

I know I know....problem is I didn't want to get too involved with this single as I have got the two stage waiten in the wings... then it's gonna be power everything....by the way no pic...thank God... but after the Packers game I did make a clean up round in my skivies....wife threw up her hands and went to bed!!! Man these cabs are comfy....minus the zippers of course!

It seems to take forever cleaning parts but the wheels I had shot blasted. there's a few new parts I had to make along the way like dash stand and track rods. the hood was the most work as it was 2 welded together and took some bashing and a skim of bondo to get it looking good, lucky my son works in a car paintshop and gave me a lot of help

@muz123, I'm right there with you man, my '97 (which happens to be an anniversary model) with 2stage and cab, and then the 2 '95s 1 with a single stage and 1 with a plow, now I noticed the CUB CADET weights on your single stage rig if you want to use your rear wheel covers and keep the weights just put them on the inside like I did,Jeff.

looks like you are ready for this:

My Lawn Ranger is! Anyone else?

So, today two more horses followed me home. These critters sure are friendly! Somebody should have warned me that they breed like rabbits! Anyways, the first is a B80 with the 8 speed and a 16hp Kohler. The metal is straight and it runs strong. It does need a governor adjustment and the voltage rectifier needs to be hooked up. The tires look ok, but they are very hard and are starting to crack. The second is a Charger 10 with hydro trans, an 8hp Kohler that smokes a little, and duallies. This tractor needs a new voltage rectifier, one new rear tire, and an engine rebuild or new engine. These tractors came as a package deal with a bunch of parts, including a couple mule drives, a 30-some inch universal snow plow, and a 38" triple blade rear discharge deck. $400 took it all home. How do you think I did?

Here is my snow team! Got my 97 520 to the left. My 93 520 in the middle and to the right is my back up 92 520. Just need chains on my dual stage and I'm all set! Just need snow now!

I also made heat for the cab that blows in off of the engine and muffler. It keeps you toasty too.

Hey Glenn, I finally got to try out my new LED light bar. Is this bright enough?

I was out at 6am clearing the 5" we got with my 314-8 and Nos tall chute blower. Sorry the picture quality sucks. I was in the cab and It was raining

So this new to me cab reared up and bit me a little......the zipper on the left side that you have to reach thru to turn the chute did a little abrasive work on my arm. Lesson learned button down yer sleeve or wear gauntlet style gloves! Have had worst injuries via the rolling pin but still could have been avoided. Was so nice & cozy in ther no jacket! Plan to extend it into the cab but a 2 stage is in the future. Excuse me right side...

Here come the red bits

Or remove the plug completely and patch. Patches will hold for the lifetime of the tire if applied properly.

Need to get going on that 2 -stg tho--- I wanna be able to launch it into the neighbor's drive like Dan!!

A piece of 5/16"-3/8" rubber hose clamped to either end makes a great flex coupler,Jeff.

Just thinking maybe you could adapt something like this to let your adjustment rod move up and down

The 420-LSE has magneto ignition which is self powered so the ignition switch must be grounded to the chassis to shut the engine off. If the 414-8 switch is a 1986 model it is the wrong switch because it used battery ignition in a K-Series engine. 1987-88 and 89 414-8's used the M14 with magneto ignition so this switch should work. Garry

Thanks Gracie's Dad. 25 bucks??? That's a deal! I'm sure one will come up. Like I said it's not a need at this point. I've got a toro 926hd that eats snow like it's nothing but man is there a lot less work involved when your sitting on a tractor. On top of that I'm surrounded by widows and elderly people that I can't in good conscious let do thier own driveways so for every snow I've got at least 5 driveways that I do on top of my own which is about a 1/16 of a mile in total......sigh....one day I tell ya ....one day!

Wow this Zit I have on my forehead really needs to get burst

John--that is some interesting thoughts with the Kubota travtor and how they handle the airflow problem. At this point, I need to find the right cab first, then I can worry about heating it. Right now, I'd be happy to just keep the blowing snow off of me while clearing the drive. If I had a sealed, heated cab with a radio, I'd end up spending a couple of hours in it every time I had to move snow. Jim--that H looks right at home moving snow and you seem to be pretty cozy in that cab too

You can upsize to a 23x8.50x12 rear tire with no clearance issues. Mike.....

Ed I like that mechanical chute deflector control thanks for the tip and inspiration ,less $ and aggravation than the electronic styles in my opinion, and the solid stone deflector really helps with getting that snow up the chute as I've done that myself on my single then put it over on my 2stage and my here's my crank extension it too was on the single now on the 2stage ,Jeff.

Hey Jim, Extend that chute crank back into that nice warm cab and you can keep your zipper closed. May as well install a chute deflector inside the cab while you are at it.

This was my doo today. Giving he a fresh top end rebuild

Not me Jeff.....I use real butter. It also works well on the boat trailer bunks.

Quite a good looking team. Maybe add a cab on the big 2 stage chucker.

Here are two very interesting sites I came across recently: (1) "20 Custom Tractors" by Don Campbell (YouTube Video below, 10 min) He modifies JD's, has lots of nice custom tractors, wished we could see inside his shop. (2) www.TheLittleTractorCo.com Kurt Smith custom builds 1/2 size Garden Tractors, site shows a lot of detailed custom steps making these.

I got mine from familyfarm and home it's like tractor supply for less then $3.00 each. The only thing I don't like about them is the bearing is sealed and not open like the original bearings. But they do work. I would look on flee Bay if you want original bearings . Others may have info also on where to buy. Welcome to the best wheel horse site you'll ever find. Nice to see another Michigan member

This was even a little cold for me . Minus 11 . But serene , peaceful & beautiful .....

Don Campbell lives a few miles from me and has done some unbelievable custom tractors. He's partial to using JD green though. He even build a mini road grader out of a Wheel Horse. His real passion is building models of different machines. I'll see if I can find a link to him or you can google him to see some of his projects. He hasn't done any tractors in awhile. I think he's focused on his models now.

Thanks everyone for the birthday wishes it was very nice meeting most of you at the big show and I'm looking forward to meeting more new people this next year at the big show. I want to thank everybody for their patronage The last couple of years have been fun and there's more new stuff In the works.Thanks again, Lowell

Happy Birthday to @wheelhorseman1000, we are all glad you were born.

Hood turned out sooooooooo nice.

Hey has anyone used led lights in replacement of factory headlights? Not just led bulbs but actually replace the whole headlight assembly with two led lights. I have a 75 c100 and the reflective bezel is gone, tried some other reflective material but doesnt have much projection from the led light bulbs i put in them. Was thinking of using something like this maybe?

HAPPY BIRTHDAY Lowell ! It was nice meeting you and the wife at the big show. Thank you for the hospitality and having the lift bar for my graderblade . Your work is the best . Tell the wife hello from the guy in the trackchair.

That is why I like the HF model I linked to. It doesn't have to be bolted down and can be removed and store away. It just hooks onto your trailer rail when you need it, and then just take it off when you don't. http://www.harborfreight.com/900-lb-capacity-hand-winch-62471.html Now if your tractor was something like a JD 430 or 400, then the load capacity wouldn't be enough, but for most garden tractors, it will be okay.

It actually went very easy after I had the right bearing had it together in maybe 5 or 10 mins

First off if no one else has said so...To the best of my knowledge there was an aftermarket one (Berco/Bervac?) years ago but no longer in production, the 2stage is nice and can be run on your 314 as the one I bought last year the P.O. had used it on a 314 then a 315, and IMHO you would be just fine with a tall chute single stage as I have used mine from 2000 till last year on my 520 it will throw snow nearly as far as the 2stage ;easier to lift and steer; cheaper to repair, and easier to run with single cylinder Kohler, good luck on your endeavors,Jeff. Pic#1 tall chute single, #2 the 2stage you're familiar with (both on my 520H) and the Berco/Bervac? style on another member's rig.

What a lineup! You are ready.

Looks like you and your boy will have no issue clearing snow Dave! Mike....

Awesome snow team Dave... and ditto what Ed said above.

If you had it torn down, I would recommend vapor blasting. It strips and polishes nicely. Not at all abrasive, but gets the paint, crud,and crap off quickly. Does a fabulous job on motorcycle engine cases, for example. But since you want to stay away from water, here's something to consider. I recently saw a tool Eastwood has come up with to strip metal. I thought I looked pretty neat........especially for moderate to large size areas. Might be worth considering. Christmas is coming up soon........ Eastwood Contour SCT™ - Surface Conditioning Tool http://www.eastwood.com/eastwood-contour-sct.html?SRCCODE=1EM4410&trk_msg=H0E4UVHVLGM4BAII6UFB4TKASK&trk_contact=R8NMFIS9N4HSMNKFB7C7UQ0GVK&utm_source=Listrak&utm_medium=Email&utm_term=http%3a%2f%2fwww.eastwood.com%2feastwood-contour-sct.html%3fSRCCODE%3d1EM4410&utm_campaign=1EM4410&utm_content=1EM4410 Videos available at the above link.

Try this stuff from HD or Lowe's I use it on my throwers/blowers,Jeff.

Nice looking bunch of 520's, I love the 520's.

, many of years and tires . Both ag type and auto . Not to say other ways won't work , just speaking from personal experiences . I would never use a plug (quick fix) , I could have the tire off , inside buffed ,cleaned ,glued (witch usually took the longest to flash) patch applied and tire back mounted in less than twenty minutes. This was done all by hand and a real old manual tire machine . Sometimes it took longer to find the leak than it did to fix . I just wouldn't chance it and have to go through the whole process again.