Leaderboard

C 160 Spirit of 76 73 12 spd. Ezra 704 Reddi 59 RJ Ralph 67 1267 Skonkfest tractor "Skonk"

Like all the pictures.

The latest forecast say It should start here at 4PM today and stop early Sunday morning accumulating 2-3. That's feet not inches. Let's see, I think the Blizzard check list is complete: 1. new batteries in the 520 and 312 2. fuel tanks all filled and 15gallon in cans 3. kerosene heater and can filled 4. Onan gen set filled and moved to back porch 5. propane lanterns ready 6. water buckets filled 7. chain saw ready w/ new chain 8. supports installed under 13X15 flat roof 9. bird feeders all filled 10. chimney cleaned and enough firewood for 2 weeks moved inside. Bring it on !

My 312-8, C165 (with a C125 hood), and my 520H.

here is mine I don't think I should put the green and yeller ones on here

Here's my heard, have added a few more, and will be off on a road trip this weekend for more, under the cover of darkness we will travel.

Here ya go. Glenn

Getting ready for a parade last fall.

C120 and a 417-8

Before and almost after.

Mighty 520H and 42 inch blade.....

What happens when a maintenance man decides to have some fun with his snow shoveling duties? This:

Only a foot of snow in Upper Michigan so the herd is getting plenty of rest but the herd in the back ground keeps busy. 1977 C-120 1995 520H 416-8

All but one is a horse, but it is red. he he he I have a few more in the barn.

I picked up this 753 which had all the goodies on it! It ran ok. the 2 piece tank of course leaked pretty bad and so did the hy-2 hydraulics. It was in good shape besides the hood was mangled. The day I picked it up 1st thing I did was yank the tank off and replace 2 piece tank seal with Ron Greco reproduction seal and got it to seal 1st time around thank god 2 piece tank is a good and bad idea good cause they are aluminum and don't rust bad cause its a leak point! This is after the 1st stage of buffing This after I polished the original paint with a buffer it came out to nice to fully tear it apart so I left it !

Great pictures from everyone!!

Wish anything I had looked as good as anything you've shown here! My 522 should clean up pretty darned nice when I get a chance and seeing your XI sure makes me want to get a chance! Very nice Glenn!

heres a few of mine

Not strictly a WH, but close...

This is like first ice here...middle of January this year, Anyway, thought you might like a few pictures. Maybe a great screen saver for the summer. The Northern was released and is OK...about 26 inches. 22" is a keeper on this lake. We are looking for one that is about 34" between us...we return the rest..

CONFIRMATION ON THE SPIDER (DIFFERENTIAL PINION GEARS). !!!! The #3531 spider gears from the #5003 & #5010 RJ & Suburban differentials will work in the #5007, #5025, #5046, #5048, and #5053 Roundhood 2 piece, 3 speed uni-drive differentials and vice-versa...ie. the #4235 spider gears will work in the RJ & Suburban differentials. The only difference between the 2 types of axle gears...one is splined for the axle and the other one is keyed. They are the same OD with the same amount of teeth. The difference in the spider gears...the RJ & Suburban has 12 teeth...the uni-drive 3 speed has 11 teeth. This means that you can use spider gears from say, a 702 transmission in the differential of a RJ transmission. One thing, you have to do it in sets of 4 pinions...ie. You need four #3531 spiders, or four #4235 spiders...you can't mix them up. First 2 pictures show the 2 types of axle gears. third picture shows the #4235 spiders in place of the #3531s. The axles turn smoothly...they have to...the axle gears are the same.

Two Horses neither one are trailer queens.... love them and use them.....

Here's my small fleet of 2 that I'm very proud of

Those front tires and weight! And cantilevered weights! Make a big difference in steering traction? Harder to steer?

You'll have to excuse the Cub seat....it was free.

All my pics dissapeared,,,,thiese are whats left...!!!!!

Snow picked up again and we waited until about 8:30 and hit it hard again. Don't have much of a driveway, but live at tne end of a dead end street. If we didn't plow it, public works would get it - probably a day later. 520H, 42 inch blade and Matt's foot control kit. We'll hit it again in the morning. Bill

So today re-affirmed for me that there is still good stuff out there to be found. I was checking out Craig's List a few days ago and saw a listing for a new Wheel Horse hood. The ad said it was for a C120, had never been installed and to make a fair offer. I'm still real busy at work, Not at the beach like some people, and didn't get a chance to call. When I remembered about it 5 days later I figured it was gone. I checked, and the listing was still there. I got a hold of the guy and he said he had one guy call, who he had some choice words for because he low balled him at $25 for it. He basically told him to you know what in his hat and he'll crush it first. He then told me there was some other NOS stuff and because I sounded like a decent guy who wasn't trying to screw him he would let me have the hood and all the other NOS stuff for $50. I barely could contain my excitement. That was last night. So today after 32 hours straight at work I headed to his house to collect my bounty. The story goes he bought this stuff over 20 years ago to restore a C120 he had but never got around to it and ended up getting rid of the tractor. He put the parts up in his barn and thats were they have been ever since. Well now the parts are in my shop and they will going on my C160 this spring. The paint is unbelievable. A couple of small imperfections but nothing that can't be buffed out.

After a mild winter so far this year, I came close to blowing it. And it looks like I will be "walking" this time for this storm. The 523Dxi decided to have an intermittent problem with the glow plugs so it is to the rear of the lineup. Luckily I sprung last year and got a cab for the Ariens walk-behind. It should be handy with the winds that are predicted. In the meantime, planning on hunkering down until ...? But someone else is ready for fun!

I think you need a 4 wheel alignment , your tires are out of whack.

No, if that was in DC the Democrats would be on one path and the Republicans on the other and when they came to the intersection there would be a total impasse!

You certainly would get a few rubber neckers if you was to trot around out there on a horse pulling your ice gear!

Craig needs to take the roof off the shed and do an overhead pic!

I would do whatever it takes to get the tractor. It clearly means a lot to you. I have my grandfather's tractor and someone would have to remove me in a body bag to get it away from me. It's no longer just a tractor at this point. Keep us posted on how you make out. I would like to know. Here is my grandfather's 1961 - 701. My husband got it running again and some new paint as a gift for me this Christmas. I know it has a 702 on it, but the guys here on Red Square helped us out with this. Great group of people on here!!

fresh out of the sand blast cabinet paint is a shade off but its going to have to work the other [paint god knows how old it is just off to finish up this mess on the hy-2

"When you get to the fork in the road, take it! " Yogi Berra

That is on sweet 416 @JERSEYHAWG / Glenn....needs a cab tho......