Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation on 02/19/2015 in all areas

  1. 9 points
    Just wanted to share a cartoon drawing of my 1977 Wheel Horse pulling tractor that was done by artist Donnie Dana of New York. Three pics posted are the line drawing, colored version, and the original photograph used by Donnie to make the drawing.
  2. 4 points
    Sometime last year I scored this custom made front axle assembly for an RJ. Supposedly made by a machinist, this thing is not only solid but incredibly precise without any play whatsoever. Wheels sit absolutely straight without the usual negative camber. The wheel holding method probably the best I ever came across, no tools needed,really easy to take out wheel, and no washers needed since the slotted nuts, allow for a wide range of adjusting. Missing was the steering link. Standard one would not work so I had to fabricate that whole part of it. Awsome steering now. No play in any way really tight and precise steering . Another great improcement on it is that where it mounts to frame it has a hardened insert. On old axle that hole was already greatly enlarged and out of round. Who ever made it sure thought of everything.
  3. 3 points
    https://vimeo.com/120115471 Apollo playing my sisters dog and my niece my dog dragon I recently had to put down my life long companion Sent from my iPhone using Tapatalk
  4. 3 points
    "STEEEEEEEVE, YOU BETTER NOT BE PLAYING AROUND ON EBAY AGAIN! Now get in here and take the trash out!" screamed Mrs Bo
  5. 2 points
    Well living in Boston this year we have had a lot of snow just to say the least. About 8 feet in the past 4 weeks and the horses are getting a work out and finding all the weaknesses. I'm out of commission for the snow but the wife, daughter and her boyfriend are keeping up with it. Problems in had this winter are a blown engine in the 72 raider 14 with snow blower attached and smoked bearings on the drive idler and snapped belt on the 312-8. 72 will be down until I can get around again so repaired the 312 and removed front blade from that and installed blower. Just a couple of picks.
  6. 2 points
    I know you folks up north are sick of the stuff, but here in central Virginia we are always the bridesmaid, never the bride, or put more accurately, we're always cold rain or sleet while people 70 miles north or south of us get the fun. I guess I'm not the only one in these parts doing a victory dance! Anyway, I figure we got somewhere between 8 and 10 inches. I plowed once during the night while it was snowing, and then again this morning when I shot this video. I used a GoPro mounted on the tractor and a Garmin Virb on a tripod. Nothing earth-shattering, just happy to be able to push something!
  7. 2 points
    me and my boy Apollo Sent from my iPhone using Tapatalk
  8. 2 points
    Wheel horse d250 snow plowing: Wheel horse d250 snow plowing pt.2: The d250 is a beast plowing snow. I took it easy on her. Kept it in 1st gear and about half throttle. And boy lemme tell you it just laughed at the snow. I knocked almost 2 hours off my time by using this machine than my snowblower that i normally would have used.
  9. 2 points
    you mite try leaning the blade forward a notch or 2, this will help keep the snow on the blade. Wingrider
  10. 2 points
    Wheel horse d250 snow plowing: Wheel horse d250 snow plowing pt.2: first time trying to upload a video. Let me know if you can view it. Also sorry about the quality my wife is not the best photographer and was not happy about standing out in the cold filming me on my new toy lol. Let me know what ya think.
  11. 2 points
    Excellent video...something about plowing snow...I don't think I would ever watch a video of someone mowing their lawn.
  12. 1 point
    Anybody have any Serial Numbers gathered up for the 701 Model? I'd like to start one up if nobody else has. My 3-701's are Serial Number 48085, 48684 and 48695. Let's see what everybody else has. Thanks...KJ
  13. 1 point
    Boy they just can't leave a good thing alone! It makes me want to delete it all together.
  14. 1 point
    While surfing the usual ebay I came across this sign and was the first to bid on it. I felt that I stepped up on the max bid of $310 (opening bid and reserve was $295). I was on my cell phone with less than 1 min left I was outbid and when I went to increase my max bid to $325 on the phone I made a mistake and increased it to $325,000.00 !!!!! My service was very slow and I was unable to change it. The other bidder went up to $350 so I got it for $351. That could have been a disaster for sure !!!! I am not sure if I was bidding against anyone here if so sorry. It will make a great addition to my barn.
  15. 1 point
  16. 1 point
    Well it's 0 degrees and there's nothing else to due so I decided to re due the barn. I sold some tractors and move some out for other members to enjoy. Don't worry everybody I'll fill the barn back with more wheel horses tractors eventually. The loader with attached forks worked great for putting tractor in the rack and as well taking them down. I started Saturday at 10 am to Sunday 3am. I was frozen as the wind chill was -15 but I'm from Buffalo where use to these winters...
  17. 1 point
    I have always wanted to go but have never been and I never seen the news letter. There are a lot of new members who know very little about the show. We all look for sources for replacement parts. What about something on the vendors and the products they offer that will be at the show, decals, reproduction parts, custom hitches and hitch parts, etc? If I bring tractors or attachments to show or trade what do I need to know? How about some inputs from some of the collectors and what models they plan on bringing to the show? How about a section on shops that do repair including engine rebuilding? Maybe a section on some of the popular part sources. Will there be any contests or judging to talk about, what categories, who are the judges? How about a description of the physical layout of the show grounds including display areas, flea market areas, parking areas, rest areas, picnic areas, etc? What are the available hotels and motels in the area, any special deals due to the show?
  18. 1 point
    My Wheel Horse 701 is Serial Number 51952
  19. 1 point
    On the C195 with a helper pushing the snow banks back in anticipation of more snow!
  20. 1 point
    Interesting, The only way to get that for $100 is if the seller has no internet access and no clue of what he has. Start at $100 but be prepared to go up from there, it's worth more than $150
  21. 1 point
    After seeing your collection, I knew I should have built a bigger shop.
  22. 1 point
    Yessir, she's a '47 VAC. Despite her appearance, she ran like a top when I put her away. Backed in her spot under her own power before I started dismembering her for some cosmetic work lol. Being a two-cylinder guy, her 4 banger just never sounded "right" to me... 😉
  23. 1 point
    Glenn, I used the software that came with the camera. Here's a 90 second promotional video that sums it pretty well. The music is just some royalty-free "stock" music I downloaded from the internet...I think it's called "Born Barnstormers".
  24. 1 point
    Craig, I used the "Virb Edit" software that came with the camera since it's designed to work with the GPS overlays (not seen in this video...there's riding vids on my YouTube channel that have it). The software is easy to use and gets the job done, but honestly, I've used better. I had a great software package installed on a previous computer that came with a piece of video hardware, but I can't remember the name and have no idea where I put the discs! I've used Microsoft Movie Maker in the past, and it was OK, but as I think about it, I don't know that I've seen it on this Windows 7 machine...
  25. 1 point
    If its stuck it is no longer perfectly good lol.
  26. 1 point
    Lol, yup pretty sure she'll fit through the front door!
  27. 1 point
    Depends on how they were ordered could have no forward Hydraulic outlets to 4 outlets on the front. I like the 4 outlets then you can push the blade down and angle it from the seat. I'd like to see him plow in road gear, then that snow would fly
  28. 1 point
    Don't wait... run to get it. (in the house)
  29. 1 point
    Have a few 701 serials recorded. The bold one is the last added. 59963 59960 59480 59479 59385 in the UK 58364 58048 58037 57888 57854 57834 57782 57720 57707 57222 57165 57078 57014 56193 56142 56141 56000 55978 55907 55895 55894 55082 54735 54695 54609 54530 54480 54395 54276 54209 54157 54140 52014 51967 51952 51887 51434 51337 51222 49122 49118 49022 48967 48939 48832 48736 48695 48684 48596 48358 48317 48289 48232 48226 48210 48110 48085 47793 47770 47457 47479 45709 Garry
  30. 1 point
  31. 1 point
    Maybe you could copy this procedure & remake them , could make a small fortune, I'm sure there would be plenty of buyers here on Redsquare, I for one would order a set.
  32. 1 point
    AMC was that stainless put on a brake? It doesn't look flat.
  33. 1 point
  34. 1 point
    I solved that problem by shooting it 40 feet with a blower
  35. 1 point
    I actually did tell her.... not sure as to why
  36. 1 point
    It could have gotten a little dicy explaining that one to the wife... I don't care how much she loves you
  37. 1 point
    I was fortunate enough to get to go to Australia in 08 and 09 here is some of their wildlife. This guy was only about 8 feet off the ground. I could have patted him on the rear, but took a look at those claws and teeth and thought better of it. These were everywhere. Portuguese Man O' War. Some kangaroos outside our hotel. This is a PG picture, that is a baby's tail sticking out of mom's pouch. I also got to go to Tasmania on the first trip. This is a Tasmanian Devil roadkill. I am not in the habit of taking roadkill pictures. but how often do you get to see a wild Tasmanian Devil. Unfortuneately no live ones. My cousin was trying to flip it over for a better shot, but a truck was coming and this is the best we got. An echidna. The little penguin. Mark
  38. 1 point
  39. 1 point
    A number 49118 and a 54209
  40. 1 point
    Here's our little babies. 3 year old Kahlua, a Yorkie and Baylee, a Shih Tzu/Pekingese-Dachshund/Chihuahua mix. She's 14 months old now and has developed a cherry eye so she's scheduled for surgery.
  41. 1 point
    I bet it would fit through the front door...
  42. 1 point
  43. 1 point
  44. 1 point
  45. 1 point
    Here's pictures of the pond,dogs,Mali lizard and pet whale I forgot to add.....
  46. 1 point
    I have koi,aquarium catfish,2 Maine coon cats,dogs,lizards and Mali uro.
  47. 1 point
    Yeah, I hate it too. It never comes up the same way twice. Trying to find "conversations" is a real adventure sometimes.
  48. 1 point
    Great job Chuck! Thanks for organizing this again Gene. Always a great time!
  49. 1 point
    My wife and I have two golden retreivers and an orange cat... This is Ellie, she'll be two this spring Here we have Josie (dog - she's 6) and Ari the cat. Ellie on the wheel horse...
  50. 1 point
    Morgan 10, Mollie 11, Tobie & Charlie 5
This leaderboard is set to New York/GMT-04:00


  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...