Leaderboard

Hi fellow Wheelers I just completed the fabrication of a Three Point Hitch for my 70"s GT14. Parts List include: 1. Used Wheel horse Rear Axle Bracket to which I added two Class One Hitch Pins with a steel bar welded across (bar was from an old shaft from a bad shock absorber) 2. Lower lift and Center lift bars and center lift arm (purchase from e-bay for $150) Note: One side was adjustable and the other solid, I changed the solid one so that is also adjust so that I could obviously adjust it and also make it fit better by removing a section and welding-in two threaded bolts 3. A twenty inch Class One tow bar from Tractor Supply for $139 Think you'll agree it came-out pretty good. Comments or suggestion appreciated As a side note might someone know what the rear pulley on the GT14 is for..... I assume perhaps the rototiller... but it looks so flimsy for that? Thanks

I bought this rust bucket from John Campbell over a year ago. it had a nice wheel horse high back seat. Worth what I paid for the tractor. It was rusty and had a broken rod. Few weeks ago I decided not to part it out and bring it back to life. a quick sand blast and lots of wet sanding rust pits, its all back together. I didn't have any intention of making this a show tractor. John claims it is now. I have to clean up some wiring and finish the deck and its all finished.

So I just couldn't bring myself to put that ugly Rural King battery in the horse, so I made a cool decal to cover it ... trouble is, you can't see even an edge of it!! grrr Had to do something with the front of the battery box ... looks cool, if it will stand the heat!!

My winter projects are coming along nicely. I wanted to get everything done last fall because it was such a tuff winter last year, and I did. So my winter projects are...sleep late in the mornings, go ice fishing when the temp is in the 20's, light the fire place and watch as much football & basketball as I can, eat a lot of comfort food. I can report that the time line is looking good for a successful winter this year.

I got my raider 10 today I put a rear end in it put a carb on it it fired up second try(forgot to install battery first try lol)has the HH100 tecky.electric PTO.had a electric lift but sadly was missing it I'll find one for it.thing runs and drives great.what's everyone think

All good advice, but they all failed to warn you about the main problem you will encounter if you buy a Wheel Horse. It has been studied and proven, 99% of first time Wheel Horse buyers will contract the dreaded WHA Welcome to the

I tried making my wife a dancing pole with that stuff . . . the burrs made it a disaster Conduit maybe

k so I guess I got it figured out -kinda!

I just got this 502 at last years mid mo meet and greet and it has studded tires on it haven't got to try it in the snow yet but in the garden and on muddy hills its performed great

A update on project A HORSE WITH NO NAME.

Got my winter project mocked up today. It's frame is a1973 no name 8hp. 1967 Lawn Ranger hood stand & front axle & wheels. With a David Bradley Hood. I got a long way to go but I think it will be cool.

Just got ready for the snow, lets hope we don't need it! 16hp kohler,48in. deck and a 3-point

A friend and I are having a hard time figuring out what the long flexy rod on the top of the transmission is for. We've seen it on many tractors, and have no clue what in the world it is called or what it is for... any help would be appreciated!

The Tecky club continues to grow.

Glad you cleared that up, because I bought a cat "0" for about $20 from Rural King! Very nice fab job on your 3 pt lift...Nice GT-14 also!

After that comes: W.H.A.S. !!!!

looks pretty good!

Looks pretty good!

no difference between 91 and 96 tractors the difference is between 89 and 90. eric j

Yep, what both of them said.

Here's a pic of the sprockets on my blower. All the blowers I have had (6-7) had two idler pulleys. You can see the drive sprocket on the upper right, the auger in the center, and the two idlers on the upper and lower left. It's hard to get a good pic of the inside. Kelly is right, your one idler pulley turns the auger in the right direction, but it only has about 1/3 of the tooth engagement on the auger as the two pulley arrangement.

Let me know if these look correct Tristan? Is yours a 4 speed or an eight speed?

The easiest ones to find will probably be C series or 300, 400 series. If you get serious snow, not much will beat a 520 with a 2 stage blower on it. That will probably be the most expensive option with the highest maintenance costs (2 stage blower gearboxes, twin cylinder Onan, hydro) If you do a handful of snows (as you are saying) you could get by with any C series, 300, or 400 series with a single stage blower and a snow plow. (Never underestimate the need for a snow plow when the blower just isn't working). I would go with a single cylinder Kohler for the reliability and low maintenance costs if you dont need the big 2 stage. Go for a twin cylinder Kohler or Onan for power/ego factor (i have one, I cant deny its mostly because its cool. Everything I need could be done with 14hp) and you arent afraid of putting a little money into maintenance. Dont bother with the 516 or 518H tractors, the transmission isnt worth it. So all that to say my highest recommendations are: C160 if you like the older style, C-145, C-165, 414, 416 (Kohler single) These should be cheap and reliable 416 (Onan twin), 417, 418, 520 if you want the biggest with a little ego factor (the twins do sound real nice) The debate between Hydro and 8 speed is a long battle, but you cont go wrong either way, each has its strong point. Personal preference kind of thing. All of the frames and basic components on all of those models are EXACTLY the same so really you are deciding between some body work and the engine. Get wheel weights and chains.

Nice job......VERY nice job.Nice GT-14.Love them.I have four or five myself.Whatcha gonna use the 3 point for??

I f you replace the lining on the old disk you won't have the problem. I bought a new disk for my C-120 and wore out a couple sets of clip before I found the problem. I added a thin spacer behind the disk to line up the metal disk with the groove in the spacer.

Sure, you've spoiled 'em.

Don't let Tankman see the picture, he will use them as exhaust pipe tips

It is the cable housing, it is for running a cable through from the rockshaft to the rear for lifting the slot hitch or clevis hitch and or attachments

Alright, thanks for your input everyone. I've just had problem after problem with the hydro system and was just curious what a conversion would take. Just thinking out loud so to speak. I'll probably end up keeping the hydro in it and try to fix all the issues first. I guess you could say I was putting the garden cart in front of the horse.

It would be easier and cheaper to find a black hood that already has the 8-speed in it. (Because you will need a whole parts tractor to make sure you have all the parts you need) If you are planning on doing a full frame off restore then a swap is a little easier since you already plan on having it torn down to the frame, but you will still need a parts tractor. And if you go so far as to get a decent parts tractor with a bad engine, then its easier to swap the engine into the 8 speed...

Its tough to tell from the pics but I dont see the sloted hole for the idler/tensioner on the blower. I was under the impression that some of the older models did not have this second idler. I always thought it was added down the road. I am not near my blower but I beleive it was also pressed inward where the slotted hole is for alining the idler pulley with the rest of the drive. Could be done with spacers I guees if one wanted to add them.

Your drive chain set up is missing a idler, I think the chain is going the right way, but your not getting full contact with the drive gear on the auger, I'll get pics of mine later if no one else does

854 is really rare and do not come up very often , there was one on was on eBay early this year in Good condition but didn't sell as the guy wanted around £900 . I have only heard of around 4 856 so these are also rare ,but be patient they will show up some time & keep looking . Hunting is the best part

Just buy the b-80 and type a note in the note to seller box. I will get you what you need.

Zane, those SG's are a lot like you and me. The minute we area born we start to wear out and die. This gradual decline is only a problem if you choose to dwell on the decline and not enjoy the ride. If you lose sleep over the low battery effect on the SG, Replace the battery.

Got an easy 20. I am feeling old.

If I post big pics, when I'm finally done, there will be very little of the "holy crap" factor!! I want to keep you guys panting!! Kind of like foreplay!! LOL

Don't feel bad. Wives can smell "hobby" when it comes in the house. I was in the garage (detached) cleaning some parts with clear 1-K kerosene the other night. I always wear latex gloves which are disposed of in the garage. I was careful to take my shoes off outside, take my work pants off in the laundry room and put on my pajama pants. I took the pants back out to the garage, washed up in the basement, and came upstairs free of odor, or so I thought. Within 10 seconds of coming into the living room where my wife was reading, she said "I smell gasoline". Whether they are pregnant or not, wives are gonna complain about smelling something. Vent that paint booth and get back to work. I'll be hiding under this chair.

That is kind of what I would like to see in that engine when I finally pull it and take it a part, decksetter. My spare engine now looks like a Wheelhorse 520 engine! It didn't for years with the shrouds and muffler/intake off of it! Need to steal a bolt or two from the original motor and get my 9 pin connector fixed. I have another drive pulley coming from Joe's. I'll use the current PTO that is on the tractor now. Hopefully this weekend we will see how that spare engine idea I had works out!

I thought I was gonna be the first to build a rat rod tractor... Well at least I can watch someone else build one then I wont have to!

No heat in the barn equals no projects for me, although I do go into the barn occasionally with a nice cold beverage, look at the tractors and say nice to myself! Except when I get to the xi and then I think, dang can't wait until it gets warm out so I can figure out why it won't start!

The ol reliable 212-6!

Probably right either throw it back or use it for chum for full growed ones Couldn't leave it where it was

I'm trying too decide how I want this one to look. First pic is as I bought it, second is the idea stage.. Once I decide on what I really want to do with it I'll tear it all down and put a real nice paint job on it. I might go with the big tires in back with tri ribs on stock front rims painted white? (as the slots are off of my Suburban.) I might go with a different decal idea.,the 855 decals are kinda boring. Oh, and I hope to find something big too stuff under the hood. Maybe an Onan, Kohler twin or a Briggs Vanguard twin. I gotta have at least 18 hp on this one...

My driveway is mostly limestone "screenings". (< 3/8") I used a piece of 1/2" flat bar as a spacer and adjusted the skids until they touched solidly on the floor. It doesn't disturb the stones unless the ground isn't frozen, but it's still low enough to catch & launch frozen bulldog "waste" 30 feet or more across the yard.

let me run a pipe cleaner thru my brain and put on something I can understand https://www.youtube.com/watch?v=QMqGpuQdIwk

Don't know if this has been mentioned. The following 1523 open bearing for the break shaft should be part # b-1210 NOT b-1212: http://www.motionindustries.com/productDetail.jsp?sku=00092728 The chart shows b-1212, which combined with the oil seal, binds the brake shaft. Either that, or you can't get the oil seal on. Hope that helps.