Leaderboard

I got home from work early today , it was glorious September sunshine so I wheeled out the two ponds to do a little dusting around before I put them back in the stable to cozy up for the winter. While they we out I thought it was a good time for a photo shoot.

Was going to do an around the neighbor hood video but it's over 100 on the Tarmac! Had to settle for a few poses.

Karl I am 100% in agreement. After prior Comments made earlier today MJ was wanting to quit the forum and the whole ball of whacks. I at that point wasn't going to post this Graphic that I created 3 days ago but now that things have straightened out I will post it. This is how I truly feel about our hobby and who it has touched in our world from sea to shining sea. This will be available in a T shirt and also in a Multi Color LED back lighted display that will have a remote control. This is the best I can do on Short notice but you prolly can get the direction I am heading with This. Thanks Duke & MJ

In 2005 my oldest son got his first wheel horse. Below is a photo of him that day. Now cycle starts again with his son getting his own tractor. Those smiles look very similar.

Hi all, Biddenden Tractorfest was once again a great show and unlike last years there was no rain Woo Hoo Here's the first 3 of my Tractorfest video's, there will be a few more once I have edited them.. Enjoy

Why not just ask your questions here? While Bill is well known for being the face (and voice) of the Wheel Horse Collectors Club, he is but one man with one man's knowledge and experience. There are many, many people here who have been far more active lately and are always up on the newest discoveries and observations. In this hobby, a lot of what we have to go on is undocumented, we have to rely on what people have seen and researched. Post up your questions. If the answers are out there, the membership here is happy to help you or direct you to someone who can. That's the best part about the fourm... the vast knowledge and experience of people willing to share.

Been messing with some of my 953 parts the last couple of evenings. Here's where I'm at so far..... Nowhere close to perfect...but I like it! I'm definitely going to order some new lenses from Glen soon! These are in bad shape!

Well some of you know that KenB is big into vintage boats and outboard motor collecting and restoring. He got me hooked... Here are two of my boats before and after pics. I want to thank Terry for all his help in making the decals. He made a set of reggie lettering and Crestliner side decal that is being shipped now for the aluminum boat. I love the horses but as Ken says it is a nice change to have another hobby.

Richie, I'll bet Jerry is looking down and sharing all this with you now.

Hey I'm impressed that a couple of Michigan fans could spell Ohio State right Good luck with your new endeavor

Sometimes the insulator is stuck to the back of the module when you pull the module off and you may not see it. I believe the insulator is on there to dissipate heat build-up in the module and not to stop current. I couldn't say why one would not be on those and the module may not last long without one. I have replaced several modules and I always make sure it has a good insulator before I reassemble the timing cover. Cheap insurance! Pinning this is a very good idea since there are many owners who have never dealt with these engines. Onan's have an undeserved reputation for being unreliable and mysterious. That is far from the truth and if you own one you definitely need the service manual in your hands. These engines brought Wheel Horse from the 1950's into the 1980's in terms of power and reliability.

Love the old pics ,,takes ya right back .

Those are some really slick items, it's so cool to be able to do that. On a side note: I removed some posts from this topic. I'm not sure what the objective of the post was, but to keep this on-track they've all been removed.

Got my W.H. Push mower out today taking it to the big Mansfield,Ohio show this weekend (Sept 6&7) featuring Wheel Horse...

Heat it up with a torch and then touch it with wax. The wax will melt into the threads and "lubricate" it so you can turn it out. I recently welded a nut to a broken stud and then did the wax trick. Used a 3/8" drive ratchet and backed the sucker right out!

First hi all, glad i found this site had no idea anyone else was interested in these wonderful pieces of equipment. On to the reason I am here. Back in 1971 at the ripe old age of 3 I was allowed to tool around the sidewalks on my Grandfather's wheelhorse, a 1967 Lawn Ranger. Of course he would walk along beside me, ever ready to step on the brake. Later I was allowed to mow and pull the lawnsweeper around behind it. When he took with lung cancer and later passed from it, I went to stay with my Grandma on weekends, and helped her care for the lawn, carry groceries, etc. Later, when we all moved to Arizona, the wheel horse came along (less the snowblower) and began it's duty mowing 5+ acres of awful weeds (later replaced with rye grass), in about 1992 or 1993, I had noticed the little Tecumseh engine was getting noisy. One day it ejected the connecting rod out the rear of the engine. I made the mistake of buying a new mower, and retiring the awesome little tractor out behind the garage. Fast forward to 2 days ago... I found a H60 Tecumseh on ebay, no carb, good compression, came from a rupp go kart. $65 buy now... engine is on it's way! So I ask, should i go for a full resto on this little tractor, or just throw some paint and decals on it? Are rebuild parts still available for the engine? I am thinking maybe throw rings and bearings in it, lap the valves and run the engine? do they even have replacable bearings? I have done engine rebuilds from small block chevys to 3406 caterpillars, but i know very little about small engines. T.I.A. for any insight, Wayne P.S. photos of current condition (well patina'd) to follow

Received the decal set today. Wow are they neat. Even my wife was impressed and she scows at my addiction to these tractors. Thanks again for a job well done.

Thanks Nick I appreciate the kind words.

Thanx for the kind words chaps, here are a few more pics I took, I would love to have one of these pics in this years calendar

Mike, thats beautiful!!! These pics get my vote for calander material You must have the day off too??? No workie for me today.

Simply... AWESOME!

Doc I didn't forget you here is a personalized Coffee Cup I made you earlier today, Just PM a Addy and it is sent to you 100% on my dime. Burrly1 and I didn't forget you either WAHH WAHH WAHH. Look earlier in the thread and you will see I made a Hawkeye decal and posted it on a White Coffee Mug. So Quit your Whining. Jeesh.

And Andrews "all in one" Garden Ranger set-up. All in all a Great show Looking forward to next year!

All due respect to those who run less than full throttle, but every small engine manufacture states in their literature that it is to be operated at full throttle at all times. Many of these engines do not have oil pumps and get lubrication from a splash. The faster the splash the more lubrication. The faster the flywheel turns the more air circulates to cool the engine. When you turn three blades as fast enough to cut grass it takes a lot of horsepower. Remember that the blades have an upward curve which uses energy and causes air resistance.

Well I get to update one of my Dad's threads. For those of you who were not familiar with my Dad, he posted this back in 2010 but never got a chance to enjoy the fruits of his labor. The gentleman that he fixed up the C175 for passed away four months prior to my dad. His wife had been cleaning up around the house and remembered that they had promised dad the tractor if something happened to her husband. She had no idea that dad passed away also. So one and a half years later, she found my dad's phone number and called for him only to find out she was too late. So I ended up calling her to find out if she would sell me the tractor and she said no. She said she would give it to me as she had promised dad. So, today I brought her home. As of right now all I know is it is a C175 auto with the KT17 series one motor and a Sunstrand 90 rear axle assy. Dad had posted it being "rough" so I had plans on using the rear axle setup in my ratitude tractor. When I got there and saw it, those plans changed. It needs some tlc but it is all there. She even has the original paperwork somewhere that she will give me when she finds it. She also has all the pics and emails my dad and her husband sent back and forth during dad's "restoration". Kind of a happy ending, just wish dad was here to share in it. Thanks, Richie

Several years ago I bought this Squire Applegate Lambert and shortly thereafter sold it. Last year I tried to track it down to no avail. A month or so ago it amazingly popped up on CL in Rhode Island. The funny thing is, a guy I know in Kansas sent me the link. He had no idea what the tractor was - he thought I might be interested. I couldn't hook the trailer up fast enough. Originally they came with 6x12's on the rear but I've since put 23x8.5x12's on it, fixed the seat and a few odds and ends. The Tech H60 is the best running, smoothest H60 I have ever seen. Coincidentally, I got a lead on the red one last week in Wisconsin and just bought that one too. I want to stuff 23x10.5x12's in the red one. The crusty, orange-ish one pictured is not mine, but illustrates the fit of the 10.5's.

I work in a automotive parts store and this old guy senior citizen has been talking to me for 2 weeks about a riding mower he's working on for a friend. It's an MTD something. It won't start. I gave him all kinds of suggestions of things to look for. And he had other people helping him. I told him you need power from the battery to key to safety switches to solenoid. He said he had the seat switch zip tied down. Told him that only cuts off the fuel ... nothing to do with cranking. The other day he was on his way to get an ignition switch... I told him I doubt if that's the problem. He put a solenoid on it with the same results. It would start jumping to the starter. I said sit on the seat, foot on brake, PTO disengaged. He stopped in this afternoon ... "Nobody can figure it out". I said "NOBODY?". Well, after supper I went over ... checked for power starting at the battery. And that's another story. No power thru the PTO switch. WHY? IT WAS ENGAGED! Decal on dash was rusted off. OK... now the starter wants to turn, but like a dead battery. He had a car battery connected to the tractor with 18ga jumpers. I moved the battery around on the fender and got the cables attached. He put his foot on the brake, turned the key and VROOOM! Another MTD still running. 15 minutes diagnosis, 2 second repair... engage brain ... disengage PTO.

I know, It's not a horse, but I kinda like the MTD...It has some character and it is all there. Craftsman snow blower is cool also. Anyone have any interest or info on their age and value ?

Ok everyone here is the one that I am going with this year and I am ready to start taking orders. These are going to be printed on the back of a red t-shirt. On the front left chest area will have the Wheel Horse logo along with some writing. The prices for the shirts will be as follows: $14 for youth medium-XL, $15 for 2XL, and $16 for 3XL and 4XL. I am willing to ship shirts to those of you that are unable to attend as well for $3.50 for the first shirt and $1 for each additional shirt. If you are wanting to reserve a shirt or have one shipped to you, please reply via private message as it is much easier for me to keep track of the orders. I do accept paypal as long as you are willing to "gift" me the money so I am not hammered on fees. Thanks again everyone for your willingness to support and promote our show! Reminder the show is in Leesburg, IN on October 4th!!!!!

So what does everyone think about these? I've only seen them mentioned every once and while?

Looking good!

That is a very interesting loader configuration. And Squonk's use of the word "scary" may sum it all up.

Does anybody plan on going to the Mansfield Ohio Tractor Show this weekend? I know a few of my Northern Ohio WH buddies are going. They are featuring WH this time around. My buddy Packrat will be taking a trailer load of his very nice WH tractors up there including his custom double engine Model 7763 and my custom Army Wheel Horse Model 762. I cannot make it due to my current medical condition. I am wanting to sell a few of my WH's also so if anyone needs a project to start. Some that are for sale will be 2 Copar Panzers, A Bantam 3000, 875 WH with snow thrower, several Lawn Rangers, 603 Special, 1958 RJ58, Cub Original and many more. Some are running and some are projects. Let me know...Keith

Looks like you're ready Ed, if that doesn't do it nothing will.

Well Well Well.. look what I just stumbled on..

Lookin' good Hollywood.

Knock down the rust first, then give the tins an oil bath. 53 year old patina is hard to come by.

Hey Wayne and You're gonna love this place, there's more help than you know what to do with here. I think we need a new word too, addiction is an understatement around here.

And this little guy was built with a hit and miss engine.....Really cool to look at...

This show also has a very cool small scale train set-up you can actually ride on for free...

OK so the cooler day has not got here yet but I could not wait any longer. Yes the 312 runs! To get it running was pretty much a no-brainer actually. First to lube up the inside I poured an once of MMO down the spark plug hole and turned the engine by hand about ten times. Then I took the bowl off the carb and sprayed it with brake cleaner. The bowl had zero rust in it so scrubbing the inside of the carb bowl was not necessary. Next thing was to connect up a battery and a remote starter switch. Then applied a couple of shots of spray carb cleaner, hit the remote starter switch and the M12 came to life. No knocking, and the only smoke was from burning off the MMO. The next thing was to blow out the fuel tank with compressed air and install a new fuel filter and put the carb bowl back on. Poured some gas in the tank, hit the remote starter and Yippee! the M12 runs on gasoline. Then out with the old oil and in with the new. Phase three was what to do about the wiring where the PO before the PO I bought the 312 from had cut up the harness and basically did a good job of showing the entire world he (or she) knew less than nothing about control circuits. So after calling Don Varos for some charging system consultation (BIG THANK YOU DON!), it was time to divide and conquor the starting circuit. After about ten minutes I discovered the seat switch was trashed, the brake safety switch was missing, and the factory fuse holders had been replaced with some ancient automotive glass fuse holders from another botched wiring project. It was then time out. After about eight seconds I decided I was not rewiring the space shuttle, so I took the path of least resistance and unplugged the 12v starting circuit wire from the PTO lever and plugged it onto the pos+ terminal of the starter relay. This made it so I could start and stop the M12 using the key switch. On to the charging system. With the engine running, my trusty FLUKE volt meter showed a healthy 13.89 vdc going to the battery. Check. Now to test out the Hydro. With 225lbs of me sitting on the seat, the hydro worked fine uphill or down. The hydro oil was very clean, so to me that was a good sign. I drove it around about 30 more minutes to get the hydro nice and hot. No leaks or slipping. Check. Tomorrow I will give it a good greasing everywhere there are moving parts. Now I have to decide what to do with it. Should I hang the tiller on it and make the 312 my tilling tractor? Well for now I'm happy it runs and drives. I'll decide what to do with it later. Or maybe take it to the Big Show in 2015 and sell it to one of you guys

I'll be there Derek i am bring 10 of my horse that's always a good show !

Well there is one thing about it, Yesterday I told MJ YOU JUST WATCH The Ole Dino is gonna get pissed cause I dint post his Team yet! Well sure enuff he didn't Disappoint. So I made him up one special I was thinking this Is Perfect. It will be blasted Tonight!

Racinbob, Your Notre Dame is way better than just my bold and underlined.. Go Irish!!

Here I go for this week: Penn St, Purdue, Rutgers, Nebraska, Wisconsin, Illinois, Iowa, Maryland, Minnesota, Northwestern, Oregon, NOTRE DAME , Ohio ST.

Best of luck in this new venture MJ. Nice job setting her up Bob! Well, we're waiting.. Hmm, maybe some Ohio State decals

You cannot catch Craig no matter what you do. When he was a child, he was vaccinated with a phonograph needle!

I used a paint stripper and it worked well. Don't get it on your skin. Burns like the devil. This is what I started with. Half way there. All gone Finished Painting What I used I several different sizes of putty knives as scrappers. The important thing about using them is to make the surface edge is flat. What I did was use a bastard file and stood the knife straight up and sharpen the edge frequently. You don't want a cutting edge. It should be square and flat. Like this that was the first time I tried anything like this. Like you I used a sander at first but it just did not seem like the best way to do it. I took the entire tractor down to bare metal. You paint this on with a brush and watch it bubble the paint. They you just scrape it off with the putty knife. Of course I did sand down the rust and filled it with Bondo. Nick

got the harness all installed and everything works. even changed out headlight/taillight bulbs and now have lights too..... but most importantly now the wiring is safe..... bit hard to photo the harness under the hood stand but heres the rest of it installed. had a + wire to the area where an hour meter would go so i might hunt one down and install it...