Custom 3d printed badges, ornaments etc.

[Wheel Horse 3D 3,666]

Wonder what these would look like with tint or even one way mirror!

[roadapples 6,981]

Looks good, and this is still flexible enough for the bend?

[Wheel Horse 3D 3,666]

3 minutes ago, roadapples said:

Looks good, and this is still flexible enough for the bend?

Oh yeah, heres 2 front frames back to back...and the inner frame is a little thinner than the front.

[Wheel Horse 3D 3,666]

I also left just a bit of slack on either end of the lens so it wont bind when ya bend either.that bend pic has a lens in there too

Edited March 5, 2021 by Wheel Horse 3D

[Wheel Horse 3D 3,666]

2nd set now done! Into the Post sometime mannana!

[ebinmaine 63,818]

6 hours ago, Wheel Horse 3D said:

Wonder what these would look like with tint

I'd had that thought too

[Wheel Horse 3D 3,666]

5 hours ago, ebinmaine said:

I'd had that thought too

Could easily add some tint film on there. If ya didn't like it could peel it off. Or even see if ya have some tinted plexi, or heck, colored plexi available locally. I used 1/8". Just leave it about 1mm shorter than the opening is wide.i think they evn make 1 way mirrored plexi.

Edited March 5, 2021 by Wheel Horse 3D

[ebinmaine 63,818]

6 minutes ago, Wheel Horse 3D said:

Could easily add some tint film on there. If ya didn't like it could peel it off. Or even see if ya have some tinted plexi, or heck, colored plexi available locally. I used 1/8". Just leave it about 1mm shorter than the opening is wide.i think they evn make 1 way mirrored plexi.

I was thinking of using some sort of yellow lens for better visibility in blowing snow while we were plowing. 

Good to know you used 1/8". should be fairly easy to get a hold of if I want to go that direction. 

[Wheel Horse 3D 3,666]

1 hour ago, ebinmaine said:

I was thinking of using some sort of yellow lens for better visibility in blowing snow while we were plowing. 

Good to know you used 1/8". should be fairly easy to get a hold of if I want to go that direction. 

Yep and its relatively easy to cut. Straight edge, utility knife, score BOTH sides well, hold down under with a board along the cut and snap!

[Wheel Horse 3D 3,666]

Some other 3d print tinkerings..a Sherman, and a Venus of Hohle Fels(earliest known 3d art of a human form)

[Wheel Horse 3D 3,666]

@Jeff-C175s silicone feiendly insert is on the printer now! I reduced the layer height (more layers,smaller steps, but more print time) and let's see how it comes out.

Edited March 5, 2021 by Wheel Horse 3D

[ebinmaine 63,818]

1 hour ago, Wheel Horse 3D said:

Sherman

That's cute

[Wheel Horse 3D 3,666]

Ohh, and dont fergit yer spurs!

[Wheel Horse 3D 3,666]

5 minutes ago, ebinmaine said:

That's cute

I need to print me an 8inch one!

[Wheel Horse 3D 3,666]

5 minutes ago, Wheel Horse 3D said:

Ohh, and dont fergit yer spurs!

Think every kid on a Horse needs a pair!

[ebinmaine 63,818]

27 minutes ago, Wheel Horse 3D said:

I need to print me an 8inch one!

You do a german type lemme know. I've a good friend into WWII. 

[ebinmaine 63,818]

32 minutes ago, Wheel Horse 3D said:

Ohh, and dont fergit yer spurs!

Spurs too?????

[Wheel Horse 3D 3,666]

Done! Feel good, sturdy yet thin,that layer adjustment looks nice, but heck, Jeff likely needs hubcap not clsssic!

[Wheel Horse 3D 3,666]

5 minutes ago, ebinmaine said:

You do a german type lemme know. I've a good friend into WWII. 

Theres tons of good 3d files out there for ww2 vehicles.

Anything specific?(panzer,tiger, or one of the mobile artillery pieces?)

[Wheel Horse 3D 3,666]

[Wheel Horse 3D 3,666]

18 minutes ago, Wheel Horse 3D said:

Theres tons of good 3d files out there for ww2 vehicles.

Anything specific?(panzer,tiger, or one of the mobile artillery pieces?)

Heres a pretty decent tiger model

[ebinmaine 63,818]

18 minutes ago, Wheel Horse 3D said:

Theres tons of good 3d files out there for ww2 vehicles.

Anything specific?(panzer,tiger, or one of the mobile artillery pieces?)

Anything that's identifiably German WWII is Great

[Wheel Horse 3D 3,666]

Just now, ebinmaine said:

Anything that's identifiably German WWII is Great

Might take a bit to get to, but ill start with a small one for my own collection!

[ebinmaine 63,818]

1 minute ago, Wheel Horse 3D said:

Might take a bit to get to, but ill start with a small one for my own collection!

Hey also 

Vought Corsair Vwing or a B17

[Wheel Horse 3D 3,666]

1 hour ago, ebinmaine said:

Spurs too?????

Did these for a friend's grand kids. Actually one of my first models, and the first job I got any pay for! Deaigned the rowels so they actually turn, and pointed...but not TOO pointed lol.