Sign in to follow this
Followers
0
Welcome and about Wheel Horse 3D by Greystone
By
Wheel Horse 3D, in Wheel Horse 3D by Greystone
-
Similar Content
-
By Wheel Horse 3D
Our "Caballo Diablo" ornaments add some extra flair to your customized ornament with the addition of a 12v led and light guiding filament to make the eyes glow or even flash! Available with solid red or flashig red LED, in unfinished, primed, or silver or multi-color painted finish, and in the same horse and head styles as our other custom ornaments. If ordered less than fully finished, the filaments are left long to simplify finishing, and can then be cut off leaving a clean end.They include mounting hardware and a bottom spacer for a clean finished look. Can be ordered here:Wheel Horse "Caballo Diablo" hood ornament
-
By Wheel Horse 3D
Our customized ornaments have a base identical to our version of the original style ornament, but can be topped with 3 different styles of horse head and 3 different styles of wheel! Each is available unfinished, primed, or fully painted.
They also include the pictured mounting hardware and the base spacer for a clean finished look. Can be ordred here Custom Wheel Horse hood ornaments..9 different styles
-
By Wheel Horse 3D
Our "regular" ornaments can be ordered unfinished, sanded and primed, or sanded primed and painted silver.
They are about .25 if an inch longer than the original factory ornament, but still have the same 3" spacing. Each ornament comes with the pictured hardware and includes the base spacer for a clean finished look. Can be ordered at Original style Wheel Horse hood ornament.
-
By Burnerman
I’m building a lowered 300 series wheelhorse. So far it’s a combination of 3 scrap tractors.
the frame, trans and tins are from a GT2500 anniversary special given to me by a neighbor with a trashed Briggs. The Kohler M12 is from a junkyard 312 that was roached. The parts tractor I’m using for the build was another older 312. I’ve got the k301 in the garage. The trans was toast. Both axles wallowed out keyways and 1 axle actually broken.
Anyway! I needed a project and a toy to putt around the neighborhood. I couldn’t find any other posts on how to do the whole thing. I’m trying to keep it cheap using stuff I have on hand and looking as “stock but cooler” as possible. So here we go.
I’ll update this as I go along.
-