Recently Browsing 0 members
No registered users viewing this page.
Decided to sell the 314-8, wife wants to mow the lawn more and doesn't like shifting gears. It's a 97 or 98(i don't remember off top of my head) 314-8 hour meter says it has 261 hours but it's broken so if I had to estimate the hours I would 600-800. Mechanically very strong with no issues, I've used it weekly to mow my lawn for the last couple of years. Comes with a 37" side discharge deck and bagger setup if you want it(not pictured). Only trades I'm really interested in would be a full hydro tractor. Let me know if you have any questions.
1997 Wheel Horse 314-8. Runs great.
42" side discharge mower deck
42" single stage snow thrower. Includes wheel weights and chains.
$200 each or $500 for all 3.
I am in the process of restoring a 72 Raider 8 and decided I would beef it up a bit with a custom stack. Currently the motor is out of the tractor and am waiting for a rod, piston, cam shaft and bearing set. Motor was in total self destruct mode when the previous owner didn't check the oil 🙄🤦🏼♂️ So I made this stainless stack out of sch 5, 2 inch pipe and reduced to 1". Decided I didn't like to looks of threaded pipe so I found a couple valve parts to act as the flanges, and am going to weld the other flange to a threaded nipple and screw into the engine block. Let me know what you think! Trying to decide if I should leave it flat, mitre it or weld a turnout on it!
Also, I'm going to hold out for now until I can hear it run straight piped, but considering rolling a stainless screen down to 1" and packing gap between the stack and the screen with muffler packing. Has anyone else ever done this? Looking for ideas and comments are welcome!