Jump to content
Sign in to follow this  
tommyg

Simple repair? Hah!

Recommended Posts

tommyg

I knew is was going to take a little effort to replace the manifold on my D180, but I had no idea! Holy smokes! I should have just planned on restoring the thing while I was at it! The good news, though, is that I found that the "T" bracket that supports the steering column was totally cracked in two near the weld. No wonder my steering was sloppy. Got it re-welded and the new manifold installed. Working on putting everything back together. I wish I wasn't so anal about making sure every bold makes it back into it's original spot! Just hoping this resolves my front manifold leak. After two attempts at putting new seals (and failing), I came to the conclusion that there must be a hairline crack where the tubes insert into the mounting plate. I'll find out soon enough.  

 

IMG_1191.JPG

 

IMG_1192.JPG

 

IMG_1193.JPG

 

IMG_1197.JPG

Edited by tommyg
  • Like 7

Share this post


Link to post
Share on other sites
 
Mike_Eddleman

Hope mine never leaks. I'll use the bucket method, but a bucket under it and pore it fluid back in the tractor

  • Like 4

Share this post


Link to post
Share on other sites
 
slovinski

Wow, you went deep brother.  Glad to hear you found the source of your steering problem. 

Share this post


Link to post
Share on other sites
 
AMC RULES

Looks like it gave you a workout.  :huh:

Share this post


Link to post
Share on other sites
 
DougC

Kinda like having to tear apart the entire house to replace the front door knob...:omg:    I see you picked up all the empty beer cans before you took the picture......  :teasing-poke:      :lol: 

  • Like 2

Share this post


Link to post
Share on other sites
 
tommyg

DougC, exactly! And in the process, you find out the door jamb wasn't attached to the studs! I'm gonna look at it as a blessing in disguise, but my fear right now is that I'll get it back together and the doorknob is defective! Really hoping I've got the leak fixed in the process. If not, you might see the beer cans!

Edited by tommyg
  • Like 2

Share this post


Link to post
Share on other sites
 
DougC
2 hours ago, tommyg said:

DougC, exactly! And in the process, you find out the door jamb wasn't attached to the studs! I'm gonna look at it as a blessing in disguise, but my fear right now is that I'll get it back together and the doorknob is defective! Really hoping I've got the leak fixed in the process. If not, you might see the beer cans!

 

Well, Ohio is not that far from Iowa. Let me know if a beer run is necessary and I will do my best to deliver and even help you empty the cans. I hope however you have it fixed and the empty cans you show us are in celebration. Either way........  It's Miller Time.       :beer:

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Southern_Secret
      By Southern_Secret
      Hello fellow Horse Heads long time no post for me, life gets crazy & a lot of things change sometimes but anyhoo. So back a few years ago when I first got my 1994 314-H I had it at my shop going threw it. One of my customers walk past as im working and said, you know I think Iv got a Wheel Horse & im thinking "no you dont buddy". I give him my # to send pics thinking it was a big waste of time & after getting the pics I realized he did have a Wheel Horse! I hand shake bought it right there, asked him to bring it to my store & he said no problem. Well after almost 2 years it is finally in my orbit. I know very little about it other than his father-inlaw got it new and used it around his house moving snow and stuff. His father inlaw moved down south here when his daughter got married and gave the tractor to my customer because he had a farm & his the inlaw had no use for it anymore. Same with every barn find, "it was running when parked" 8 years ago, said one of the axel seal is leaking. Im happy and hope I can get it back in running order soon cause it is going to be handy around the truck farm!!
       
      I will post Pics as soon as I reinstate my membership





    • Swemill
      By Swemill
      Hi everyone!
      Long time since i was here and my old pics is gone from the forum.
      I just uploaded a movie with pics on youtube, and thought i could share it for you guys.
      I would love to get some comments on my Youtube channel, from you true Wheel Horse fans! 
       
      Thanks and Best Regards  
       
       
    • 87buickt
      By 87buickt
      Listing for a friend, late 70s I believe D200 deck and plow. Been sitting for a while, make reasonable offer, friend also has tons of literature he may part with, if Interested let me know

    • Nathan W
      By Nathan W
      Does this look factory for 1976 


    • wh315-8
      By wh315-8
      Anyone be able to measure out the Top Link Bar for the 50” D Series Tiller?
      Just finished rebuilding a tiller, have a adjustable type but would like to put a original type on like the manual has listed.



×
×
  • Create New...