Jump to content
Sign in to follow this  
DuchApl

My first restore ever - of anything. 1975 C-100

Recommended Posts

DuchApl

I bought this at a yard sale for $100 back in March of 2011 because I needed a riding mower - that was all. I didn't even know what a Wheel Horse was. That first summer, I spent a lot of time on the Internet and money out of pocket just getting it mowing again. Thanks for letting me lurk here and learn how special these Wheel Horse tractors really are. In the process I've developed an appreciation for how well they were built - and started to realize that some day I'd do a full-on restoration. By the way, I graduated high school just two years before this was built and I've never restored anything. I've spent my entire live avoiding things mechanical, so every time I picked up a wrench, it was a learning experience. In fact, now that the project is finished, I've amassed quite a collection of tools I've never owned.

post-4385-0-56988000-1333901785_thumb.jp

Sometime around September of last year I decided I was just going to paint the air cleaner cover... I swear I just wanted to see what kind of results I'd get with a can of IH Red and some sandpaper... nothing serious. A mild winter, a lot of paint, elbow grease, mistakes, and successes resulted in this.

post-4385-0-29944900-1333901797_thumb.jp

I love this photo - looks like it could be out of an advertisement from back in '75.

post-4385-0-14679700-1333901825_thumb.jp

This winter, I signed up for a small engine repair class at the local high school. I figured that if I was going to pull the motor, I was going to do it under supervision, but I really just wanted to get my hands on the inner workings of an engine. I had it soda blasted before dragging it back and forth to school, and worked on it for six weeks both in class and out of the back of the station wagon (way to heavy to drag all the way back to the barn every week.) I think it looks pretty good now, and runs great too.

post-4385-0-98874600-1333901812.jpg

I didn't do any body repair - maybe that's the next class, but somehow leaving the dings and dents in says "I worked hard and deserve this." Perhaps that's me talking and not the Wheel Horse. The mower deck is mechanically restored, but still needs a few coats of paint - some time this summer.

post-4385-0-74403800-1333902287_thumb.jp

Again, thanks for all the help in this forum. It's been invaluable. Now, if I could just get my head around the governor/linkage/throttle thingee, I'd be a happy camper. I'm gonna take a break and ponder the whole thing while I bask awhile in the glow.

post-4385-0-64974300-1333902014_thumb.jp

  • Like 1

Share this post


Link to post
Share on other sites
 
Bobie01

Big like :thumbs:

Share this post


Link to post
Share on other sites
 
Sparky

Very nice job! So whats next :grin: ? Just like Lay's Potato Chips...Ya cant eat (or own) just one....

Mike.........

Share this post


Link to post
Share on other sites
 
DuchApl

Very nice job! So whats next :grin: ? Just like Lay's Potato Chips...Ya cant eat (or own) just one....

Mike.........

HA! - I actually saw a WH on the side of the road a couple weeks back, but Wifey was with me and we just sped past without stopping. I suppose this is a little like childbirth. If a woman remembered the pain, she'd never have another. I still remember the pain - maybe later.

Share this post


Link to post
Share on other sites
 
1maidenfan

"I love this photo - looks like it could be out of an advertisement from back in '75."

Would have to agree with you on that one! :happy-jumpeveryone: Sure is a great looking :wh: :happy-wavemulticolor:

Share this post


Link to post
Share on other sites
 
wingrider

Nice work on the restore and keep it up. Before you know it you'll have a garage ful of tractors to work on.

I'm not sure how that happens it just does.

Good Luck Wingrider

Share this post


Link to post
Share on other sites
 
oldredrider

Yeah...I think that air cleaner looks great!!!

Share this post


Link to post
Share on other sites
 
Ole MN

Excellent job :text-bravo:

Share this post


Link to post
Share on other sites
 
AMC RULES

Great job with your first, you do really nice work. :thumbs:

Nice photography too, but this is the one that looks like a factory advertisement to me. :text-coolphotos:

post-3498-0-82888100-1333908856.jpg

Share this post


Link to post
Share on other sites
 
can whlvr

really nice job,something about bringing these machines back to new,when you need info about the gov,post pics and questions,someone will be able to help.in the kohler rebuild manual is a good description of how to set it up and someone will be able to post pics of the linkage

Share this post


Link to post
Share on other sites
 
bowtiebutler956

Man you sure that was your first resto? :scared-eek: That really looks great! :woohoo: Its a good feeling doing it with your own two hands isn't it. Outstanding work, and I can see your addiction getting worse by the minute. :ychain: Hi my name is Matt, and I'm a horseaholic. :ROTF:

Matt :flags-texas:

Share this post


Link to post
Share on other sites
 
varosd

looks like a pro resto..and this was your FIRST?!? what paint did you use? looks dead on!

Share this post


Link to post
Share on other sites
 
DuchApl

looks like a pro resto..and this was your FIRST?!? what paint did you use? looks dead on!

Valspar IH Red in a rattle can. But I have to admit to lots of trial and error. The hood and fender have multiple coats of red followed by lots of sanding and lots more red and lots more sanding, rubbing and polishing. The thing about your first paint job is you have no fear. ..along with no expectations. I actually did the hood twice. I experimented with a clear coat, but apparently hadn't let the color dry enough and was left with something resembling a dog' breakfast. So, I took it back down to metal and started again.

Share this post


Link to post
Share on other sites
 
WH Raider10

I'm in the same progres of redoing parts of my raider I'm not happy with. BUT, your restoration looks great! Congrats! :woohoo:

Share this post


Link to post
Share on other sites
 
DuchApl

Great job with your first, you do really nice work. :thumbs:

Nice photography too, but this is the one that looks like a factory advertisement to me. :text-coolphotos:

Thanks, Craig!

Hey we're practically neighbors.

Share this post


Link to post
Share on other sites
 
DuchApl

I'm in the same progres of redoing parts of my raider I'm not happy with. BUT, your restoration looks great! Congrats! :woohoo:

I hate to admit it but I've bolted on a couple of parts I'm not happy with at all. Just don't look too closely. I tried a Preval system on the belt guard. Preval works great if you get the paint thickness just right. It calls for 4 to 1, but I think that's too thick.

Share this post


Link to post
Share on other sites
 
Forest Road

Very nice job neighbor! Love the reupholstered original seat.

Share this post


Link to post
Share on other sites
 
DuchApl

Very nice job neighbor! Love the reupholstered original seat.

No, totally original seat. After watching these things go for a hundred bucks or more on eBay, I had nearly given up and was ready to drop a dime or two on an upholstery job... Until I found another '75 C-100 at the LOCAL toro dealer. No engine but a nearly pristine seat and a bunch of other parts. $40. Alas, no headlight lens, and a badly pitted hood ornament. I need the clutch arm and idler off the donor, if I can EVER get the freakin' roll pin out.

Share this post


Link to post
Share on other sites
 
KC9KAS

You have done an excellent job on your tractor!

I think you should go back to where the other WH was along the road and save it too!

Share this post


Link to post
Share on other sites
 
DuchApl

You have done an excellent job on your tractor!

I think you should go back to where the other WH was along the road and save it too!

Thanks, KC. But the truth of this tale is that my car, my principal mode of actual transportation is sitting in the driveway in need of some expensive repairs., So I'm nearly always with Wifey in her car and it does not brake for Wheel Horses. She's pissed about the car/WH spending ratio, so I'm layin' low. Told her last week that I thought I needed a red '75 pickup to match the c-100.

Share this post


Link to post
Share on other sites
 
Fun Engineer

Nice job. Keep up the good work.

Share this post


Link to post
Share on other sites
 
shootinok

Beautiful Work!

Many of us understand the car/WH spending ratio - and while I have a wonderful and understanding wife, she asked me last weekend..."why don't you just buy a new mower and quit spending so much time and money on the old ones?"

She just doesn't understand the Wheel Horse addiction :lol:

Share this post


Link to post
Share on other sites
 
gwgdog66

Sweet!! Very nice job!! :thumbs:

I have a 1975 C-100 that I purchased as a parts tractor. It was all there except the engine needed rebuilt. I decided to get her up and running. When I get time this summer I'm going to start the restoration on it.

Share this post


Link to post
Share on other sites
 
DuchApl

Yeah...I think that air cleaner looks great!!!

...because that was really the only goal I set. Everything else was just coincidence.

Share this post


Link to post
Share on other sites
 
DuchApl

Beautiful Work!

Many of us understand the car/WH spending ratio - and while I have a wonderful and understanding wife, she asked me last weekend..."why don't you just buy a new mower and quit spending so much time and money on the old ones?"

She just doesn't understand the Wheel Horse addiction :lol:

Update: Wifey tonight informed me that we need a new oven. Coincidence? Perhaps. Payback? Definitively. So I went on CL looking for something I could restore. She was not amused.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • 87 416-8 horse
      By 87 416-8 horse
      I’m looking for wheel horse tractors for sale or for parts in the Eastern Nebraska or western Iowa area. Preferably 8 speed manuals. Pm me or comment with what you have. The worst I could say is it’s out of my price or distance range. Edit: engine is not important, it’s going to get a big diesel swap.
      Thanks,
      John
    • Tinman1962
      By Tinman1962
      Recently got hold of a 656 it's has a "newer" 61/2 Briggs on it I don't believe that's right any ideas about that
    • Little Red Horse
      By Little Red Horse
      Hey all. I have a Electro 12 with a factory belly blade. It runs* and drives. I had used it to grade my driveway the last 6 yrs. Having moved I'm looking at my options on storing it or selling it. Frankly I have no idea what it is worth. I watched "ISaveTractors" video on 5 things to do with a new to you wheel horse/12hp kohler. (When i got it 6yrs ago) And went thru and did the adjustments and replaced the parts mentioned. It has been a good strong tractor for me until around July of this year. (2023)
      *Around July it started dying after running 20-30min. I replaced the carb (Chinese Amazon purchase) with one from isavetractors web site. That seemed to help it idle smoother(the old carbs jets wouldnt adjust), but it still dies at around 20-30min.
      So I've got 2 questions. 
      1. What is it worth? (As-Is) and
      2. What do I need to do to fix it? 
      Thanks yall!

    • 850ford
      By 850ford
      I am looking for a replacement Kohler for a 1980 c165,it is cradle mounted.
      Will a standard mount Kohler work, if I remove the cradle?
       I am located in Massachusetts 
        Thanks
    • BrianStasC-101
      By BrianStasC-101
      Hello all. I am looking for suggestions on adapting the pto from my C series tractor to a harbor freight predator 420 13hp engine. I know the predator motors are a controversial topic however it is the route I have chosen for this particular machine. The intent was to mostly use it for plowing so no PTO required but it would be handy to have. Looking to hear from someone that has successfully done the swap that may offer any advice before I attempt to transfer it over. Just looking for any general pointers that will help me along the way to make it go as smoothly as possible. 
×
×
  • Create New...