Front Wheel Weights

[sqrlgtr 3,497]

Finally got to mount up my JD brand front wheel weights. I painted these twice the first time just made a gooey mess, I dont know what kinda yellow paint they use but think that may be where the slogan ”nothing runs like deere” came from . FYI This style weight will NOT work without drilling new holes and are to wide/thick to work on the regular style wheels ie c series, older square or round hoods.

[peter lena 9,984]

@sqrlgtr  basic  question ? do any related  wheel bearing  function check ?  like a re grease and or added shimming  to remove wheel wobble ? Qurious , pete

[sqrlgtr 3,497]

58 minutes ago, peter lena said:

@sqrlgtr  basic  question ? do any related  wheel bearing  function check ?  like a re grease and or added shimming  to remove wheel wobble ? Qurious , pete

@peter lena Yeah replaced wheel brgs with some quality machined brgs. Also cleaned all the old grease out of spindle bores and spindles and put new red and tacky grease in them. I would like to install brgs under spindles like the 520H has it steers a-lot easier😃. Just have no mill to do it with.

[Bill D 3,024]

1 hour ago, sqrlgtr said:

@peter lena Yeah replaced wheel brgs with some quality machined brgs. Also cleaned all the old grease out of spindle bores and spindles and put new red and tacky grease in them. I would like to install brgs under spindles like the 520H has it steers a-lot easier😃. Just have no mill to do it with.

What is the PGN part number for those bearings?  I need some new one's myself.   Thanks. 

[sqrlgtr 3,497]

5 minutes ago, Bill D said:

What is the PGN part number for those bearings?  I need some new one's myself.   Thanks. 

Amazon.com: PGN 3/4" x 1-3/8" (4 Pack) Flanged Ball Bearings Chrome Steel Lubricated : Patio, Lawn & Garden 

@Bill D will this work