Recommended wiring for electric fuel pump

[rmaynard 17,140]

This will be my first venture into the world of electric fuel pumps. I just received my Facet pump and want to wire it into my 1996 416-H (Onan). For those of you who have done this on similar engines, where are you tapping into for 12 volts? 

[ebinmaine 78,554]

@Bill D I believe it was. Recommended tapping on to the positive side of the coil feed. That way the fuel pump is connected to any safety switches that may be in play also, it gets power during the starting and running phases of the ignition switch.

 

 

[Bill D 2,794]

1 hour ago, ebinmaine said:

@Bill D I believe it was. Recommended tapping on to the positive side of the coil feed. That way the fuel pump is connected to any safety switches that may be in play also, it gets power during the starting and running phases of the ignition switch.

 

 

Exactly.  Couldn't have said it better myself. 

[ebinmaine 78,554]

20 minutes ago, Bill D said:

Exactly.  Couldn't have said it better myself. 

 

You did.  

 

[ri702bill 12,009]

22 minutes ago, Bill D said:

Recommended tapping on to the positive side of the coil feed.

But... do add in inline fuse between the coil feed and the pump.

[rmaynard 17,140]

1 hour ago, Bill D said:

Exactly.  Couldn't have said it better myself. 

Thanks. That's what I needed.

[Stan50 154]

Is this correct? What fuse is needed? 15A? 30A?

[pfrederi 20,420]

The Facet pumps have an internal circuit breaker

 

None of the pumps draw more than 4-5 amps most less.  Fuse size should be based on wire gauge.  If you use 16ga i would use 10 amp fuse 

 

make your connection to the "+" terminal on the coil

Edited January 12 by pfrederi

[WHX?? 56,397]

I wired one to the pink dash lights wire on a 520 so it would be fused by that circuit. Problem is as the pump pulses the (led) lights flicker in tune with the pump. I may move it to the coil but I may have a battery going south too as it kinda goes away at throttle up. 

[Stan50 154]

1. Ok guys, so correct diagram would be like this?

2. I noticed that many of you placed electric fuel pumps near carburator in the front,but others recommend placing pump just under the fuel tank,where electric pump has short suction line.

 

3. I've got w carBole fuel pumps, one (on the right) off of Ama...com, and other ("squarish" one) from Chinese website ( official CarBole store). Both almost identical, except main body shape. Very interesting  

 

 

[pfrederi 20,420]

Wiring is correct.  For under seat gas tanks I always mount the pump low and near the tank..  If yo are putting the pump on a WH with gas tank under the hood mount where ever you can.  Gravity will fill the pump most the time.