rmaynard 16,770 #1 Posted Wednesday at 03:29 PM This will be my first venture into the world of electric fuel pumps. I just received my Facet pump and want to wire it into my 1996 416-H (Onan). For those of you who have done this on similar engines, where are you tapping into for 12 volts? 1 Share this post Link to post Share on other sites
ebinmaine 76,405 #2 Posted Wednesday at 03:32 PM @Bill D I believe it was. Recommended tapping on to the positive side of the coil feed. That way the fuel pump is connected to any safety switches that may be in play also, it gets power during the starting and running phases of the ignition switch. 2 4 1 Share this post Link to post Share on other sites
Bill D 2,499 #3 Posted Wednesday at 05:08 PM 1 hour ago, ebinmaine said: @Bill D I believe it was. Recommended tapping on to the positive side of the coil feed. That way the fuel pump is connected to any safety switches that may be in play also, it gets power during the starting and running phases of the ignition switch. Exactly. Couldn't have said it better myself. 1 2 Share this post Link to post Share on other sites
ebinmaine 76,405 #4 Posted Wednesday at 05:28 PM 20 minutes ago, Bill D said: Exactly. Couldn't have said it better myself. You did. 1 1 Share this post Link to post Share on other sites
ri702bill 10,921 #5 Posted Wednesday at 05:32 PM 22 minutes ago, Bill D said: Recommended tapping on to the positive side of the coil feed. But... do add in inline fuse between the coil feed and the pump. 4 Share this post Link to post Share on other sites
rmaynard 16,770 #6 Posted Wednesday at 06:20 PM 1 hour ago, Bill D said: Exactly. Couldn't have said it better myself. Thanks. That's what I needed. 1 Share this post Link to post Share on other sites
