Leaderboard

Taken from #492-4509 Electrical Service Manual 78-3030 Pto switch used on 1991 models 22-14O501, 22-14OE01, 32-10B502, 32-10BE02, 32-12B5A3, 32-12BEA3, 32-12O502, 32-12OE02, R2-12O501, R2-12OE01, S2-12B502 1992 models 22-14O502, 22-14OE02, 32-10B503, 32-10BE03, 32-12O503, 32-12OE03, 42-16BE01, R2-12O502, R2-12OE02, R2-16BE01 1993 models 72040, 72041, 72060, 72081, 72101

Drawing for both the short lift link, and the down pressure lift link for the front snow blade. Short lift link 105052 Long lift link 7706 most likely replaced by 7706-01 I drilled 3/8" holes in the bar and used 3/8" x 2-1/2" Gr.5 bolts. Cut the threads off. Weld the head of one bolt to the bar and try it for alignment. I ended up installing the 2nd bolt from the other direction and welding the head only. This provided 1/4" of offset and the pins are square to their attaching parts to minimise wear. Drill holes in the bolts perpendicular to the bar for spring pins. Use a countersink to ease the edges of the holes. With the holes drilled like they are you now know where they are and you can instal the pins blindfolded. With manual lift the float is built in - everything floats including the lift handle. With hydraulic lift the float is accomplished by connecting the bottom of the link to the slotted hole. Down pressure is still available when the pin hits the bottom of the slot. Garry

2877 replaced by 5305 replaced by 110506 (PartsTree $23.03 on May 12, 2019) - 6" x 1.75" Stens replacement 210-013 110506 is an alternate wheel for 6749 6749 (PartsTree $84.92 on May 12, 2019)