Jump to content

Snow Blowers

Sign in to follow this  

142 files

  1. Free

    Snowthrower 44in 1996 -1998 2-stage 79361 OM IPL SN.pdf

    Operator manual #3318-826
    32 pages 762.31KB
     
    IPL #3318-459
    8 pages 146.09KB
     
    Fits 300 400 500-Series tractors
     
    Drive belt 116332 (HB x 64.50" or 5/8" x 64.5")
     
    Snowthrower 1996 44in model 79361 Serial 6900001-6999999
    1996 serial numbers that have shown up for the 79361
    6900121
    6900188
    6900245
    6900305
    6900596
    6900607
     
    Snowthrower 1997 44in model 79361 Serial 7900001-7999999
    1997 serial numbers that have shown up for the 79361
    7900401
    7900607
    7900608
    7900795

    Snowthrower 1998 44in model 79361 Serial 8900001-8999999
    1998 serial numbers that have shown up for the 79361
    8900126
    8900170
    8900201

    278 downloads

    Updated

  2. Free

    Snowthrower 42in 1997-1998 & 2000 79360 OM IPL SN.pdf

    Operator manual #3318-825RevA or 3318-825 RevA
    26 pages 1.08MB

    IPL #3318-238
    8 pages 163.52KB
     
    Long frame tractors use drive belt 9750 (5L x 69" or 5/8" x 69")
    1-stage
    Includes PSB #42
    Fits most C-Series and 300, 400 and 500-Series
    High chute
     
    Snowthrower 1997 42in model 79360 Serial 7900001-7999999
    1997 serial numbers that have shown up for the 79360
    7900001
    7900007
    7900257
    7900457
    7900533
    7900665
    7900783
    7900821
    7900940
    7900979
    7901132
    7901309
    7901381
    7901423
    7901538
     
    Snowthrower 1998 42in model 79360 Serial 8900001-8999999
    1998 serial numbers that have shown up for the 79360
    8900231
    8900251
    8900514
    8900550
     
    No 1999 model
     
    Snowthrower 2000 42in model 79360 Serial 200000001-200999999
     

    280 downloads

    Updated

  3. Free

    Snowthrower 44in 1995 2-stage 79361 OM IPL SN.pdf

    Operator manual #3316-426
    12 pages 4.60MB

    IPL #3317-537
    8 pages 144.93KB

    Fits 300 400 500-Series tractors
     
    Drive belt 116332 (HB x 64.50" or 5/8" x 64.5")
     
    Belt tension spring 117545 nla.
    Approx 14-1/2" long
    Coil at one end approx 10-1/2" - 10-3/4" long (///////////////------)
    Coil diameter approx 7/8" OD
    Wire diameter approx .100"

    Snowthrower 1995 44in model 79361 Serial 5900001-5999999

    1995 serial numbers that have shown up for the 79361
    5900105
    5900335
    5900550
    5900791
    5900818
    5901040
    5901227
    5901428
    5901523
    5901593
    5901831

    113 downloads

    Updated

  4. Free

    Snowthrower 42in 1995-1996 79360 OM IPL SN.pdf

    Operator manual #3316-425
    8 pages 1.92MB
     
    IPL #3318-238
    8 pages 163.52KB
     
    Fits 300 400 500-Series tractors
     
    Long frame tractors use drive belt 9750 (5L x 69" or 5/8" x 69")
     
    Snowthrower 1995 42in model 79360 Serial 5900001-5999999
    1995 serial numbers that have shown up for the 79360
    5900134
    5900188
    5900233
    5900329
    5900428
    5900753
    5901060
    5901128
    5901142
    5901293
    5901586
    5901846
    5901907
    5901973
    5902014 - nylyon
    5902068
    5902212
    5902412
    5902441
    5902534
    5902549
     
    Snowthrower 1996 42in model 79360 Serial 6900001-6999999
    1996 serial numbers that have shown up for the 79360
    6900176
    6900458
    6900492
    6900494

    377 downloads

    Updated

  5. Free

    Snowthrower 32in 1968-1969 6-2211 OM IPL SN.pdf

    Operator manual #A-5258
    IPL
    7 pages 1.13MB
     
    1-stage
    Uses # 41 chain
    Includes PSB #356
    Formerly ST-326
    Drive belt 1589 (4L x 56.5" or 1/2" x 56.5")
     
    6-2211 fits short frame tractors and replaced ST-326
    1961 model 701
    1962 models 502, 552 and 702
    1963 models 603, 633, 653 and 753
    1964 models 604, 654, 704, 754, 854 and 1045
    1965 models 605, 655, 855, 875, 1055 and 1075
    1966 models 606, 656, 856 and 876
    1967 models 607, 657, 857, 867 and 877
    1968 500 Special model 1-3631
    1968 Commando 6 model 1-4631
    1968 Commando 8 model 1-4831
    1969 WorkHorse 700 model 1-3741
    1969 WorkHorse 700 model 1-3745
     
    Snowthrower 1968 32in model 6-2211
    1968 serial numbers that have shown up for the 6-2211
    398468
    398502
    398656
    398668
    398670
    398842
    398895
    403491
    403495
    407201

    Snowthrower 1969 32in model 6-2211
    1969 serial numbers that have shown up for the 6-2211
    530426 - Model year a guess
    534866 - Model year a guess
    534873 - Model year a guess
    579593 - Model year a guess
    579603 - Model year a guess

    250 downloads

    Updated

  6. Free

    Snowthrower 42in 1984-1987 06-42ST04 OM TIPL SN.pdf

    Operator manual #810264R1
    10 pages 1.14MB
    Dated 07/82
     
    IPL from Toro Master Parts Viewer
    4 pages 264.30KB
     
    Part list is shared with 06-42SY02 that fits the C-195 Twin Auto. The lift tube for C-195 is item #33
     
    The 06-42ST04 fits 300, 400 and 500-Series and the C-Series except C-195
    Uses item #18 lift tube and #20 lift flag.
     
    Lift hook flat washer 920013 is 5/8" SAE
    Lift hook cotter pin 932034 is 3/16" x 1"
     
    No longer includes 8-4311 lift assist spring kit. Now an option.
    Spring Extension 90106 replaced by 4629
     
    Drive belt for the C-Series except C-195, plus 300, 400 and 500-Series 9750 (5L x 69" or 5/8" x 69")
    Drive belt for the C-195 Auto 110037 (HB x 77.0" or 5/8" x 77")
     
    Snowthrower 1984 42in model 06-42ST04 - Last model to use a 3/4" drive shaft
    1984 serial numbers that have shown up for the 06-42ST04
    20306 - Build date 1983 3264 September 21 Wednesday
    203xx - Build date 1983 3265 September 22 Thursday
    20499
    20500 - Build date 1983 3265 September 22 Thursday
    xxxxx - Build date 1983 3269 September 26 Monday
    20824 - Build date 1983 3270 September 27 Tuesday
    23158 - Build date 1984 4200 July 18 Wednesday

    Snowthrower 1985 42in model 06-42ST04 - Last model to use a 3/4" drive shaft
    1985 serial numbers that have shown up for the 06-42ST04
    26147 - Build date 1985 5190 July 09 Tuesday
    32013 - Model year a guess
    33286 - Model year a guess
     
    Snowthrower 1986 42in model 06-42ST04 - Last model to use a 3/4" drive shaft
     
    Snowthrower 1987 42in model 06-42ST04 - Last model to use a 3/4" drive shaft

    796 downloads

    Updated

  7. Free

    Cab Snow 1990-1993 P6-50CC01 OM IPL.pdf

    Operator manual #9060
    IPL
    10 pages 2.0MB
     
    Supplied by Original Tractor Cab
     
    Fits 500-Series tractors

    111 downloads

    Updated

  8. Free

    Cab Snow 1994-2000 79943 OM IPL sn.pdf

    Operator manual  #102801
    IPL
    9 pages 4.45MB

    Snow Cab assembly instructions and parts list
    Wheel Horse 79943 for 300, 400, and 500 series tractors

    256 downloads

    Updated

  9. Free

    Cab Snow 1978-1979 87 & 97-04CB01 OM SN.pdf

    Operator manual # 810045R1
    4 pages 450KB

    Fits B-Series C-Series tractors Also fits 1977 and prior models
    Fits C-Series with steel rear fender pan except C-161

    Cab Snow 1978 model 87-04CB01

    Cab Snow 1979 model  97-04CB01
    1979 serial numbers that have shown up for the 97-04CB01
    004421

    116 downloads

    Updated

  10. Free

    Snowthrower 44in 1993 2-stage 79361 OM IPL sn.pdf

    Operator manual #3315-416
    10 pages 5.26MB
    Part 1
    5 pages 2.37MB
    Part 2
    5 pages 2.89MB

    IPL #3316-107
    8 pages 1.40MB

    Fits 300 400 500-Series tractors
    79361 weight 336 lbs.
     
    Drive belt 116332 (HB x 64.50" or 5/8" x 64.5")

    Snowthrower 1993 44in model 79361 Serial 3900001-3999999
     
     

    150 downloads

    Updated

  11. Free

    Snowthrower 42in 1978 86-42ST01 OM IPL SN.pdf

    Operator manual #803737R2
    9 pages 1.82MB

    IPL #810022R2
    5 pages 1.49MB

    Sold 1978 only
    Fits C-Series tractors
    OM #803737R1 not correct PSB #235 shows correction
    This R2 manual corrects the mistake
     
    Drive belt 9750 (5L x 69" or 5/8" x 69")

    Snowthrower 1978 42in model 86-42ST01

    1978 serial numbers that have shown up for the 86-42ST01
    004124 - Build date 1977 7199 July 18 Monday [M]
    004218 - Build date 1977 7201 July 20 Wednesday
    004253
    004904
    005347 - Build date 1977 7235 August 23 Tuesday
    005374 - Build date 1977 7235 August 23 Tuesday
    005511 - Build date 1977 7311 November 07 Monday
    010720 - Build date 1977 7313 November 09 Wednesday
    010731
    010823
    010891 - Build date 1977 7314 November 10 Thursday
    011248

    669 downloads

    Updated

  12. Free

    Snowthrower 32in 1963 ST-323 OM IPL DNA SN.pdf

    Operator manual #A-7138
    IPL
    2 page supplement #112-A dated 10/8/62
    4 pages 433.49KB

    ST-323 fits short frame tractors
    1961 model 701
    1962 models 502, 552 and 702
    1963 models 603, 653 and 753
    1964 model 604
     
    Chute belt 1590 (3L x 43" or 3/8" x 43")
    Drive belt 1589 (4L x 56.5" or 1/2" x 56.5")

    Snowthrower 1963 32in model ST-323

    1963 serial numbers that have shown up for the ST-323
    A-27183 
    A-29674
     
    32" Snowthrower DNA - For tractors with horizontal shaft engines
     
    1963 model ST-323 - Fits 701, 502, 552, 702, 603, 653, 753, 604
    (Drive belt 1589 1/2" x 56.5") (Chute turned by belt 1590 3/8" x 43")
     
    1964 model ST-324 - Fits 701, 502, 552, 702, 603, 633, 653, 753, 604, 654, 704, 854, 605, 655, 855
    (Uses # 41 chain Pitch 1/2" and roller width 1/4") (Drive belt 1589 1/2" x 56.5") (First model to use cable on the chute)
     
    1965 model ST-325 - Fits 701, 502, 552, 702, 603, 633, 653, 753, 604, 654, 704, 854, 605, 655, 855, 1045, 1055
    (Uses # 41 chain Pitch 1/2" and roller width 1/4") (Drive belt 1589 1/2" x 56.5")
     
    1966-1967 model ST-326 - Fits 701, 502, 552, 702, 603, 633, 653, 753, 604, 654, 704, 854, 605, 655, 855, 1045, 1055, 606, 656, 856, 876, 607, 657, 857, 867, 877
    (Uses # 41 chain Pitch 1/2" and roller width 1/4") (Drive belt 1589 1/2" x 56.5")
     
    1968-1969 model 6-2211 - Fits 500 Special, Commando 6, Commando 8, WorkHorse 700
    (Formerly ST-326) (Uses # 41 chain Pitch 1/2" and roller width 1/4") (Drive belt 1589 1/2" x 56.5")
     
    1971 model 6-0100 - Fits 800 Automatic, 800 Special, Bronco 14, Charger 12, Raider 10, Raider 12, WorkHorse 800
    (No record of 6-0100 at Toro. Suspect it was same as 6-0200 plus 6-9112 in one package)
    (Uses # 40 chain Pitch 1/2" and roller width 5/16") (Uses #101460 lift tube and #9750 5/8" x 69" belt)
     
    1972 model 6-0200 plus 6-9112 - Fits Commando 800
    (Uses # 40 chain Pitch 1/2" and roller width 5/16") (Uses #102729 lift tube and #102743 5/8" x 65.95" belt)
     
    1972 model 6-0200 plus 6-9112 - Fits 800 Automatic, Bronco 14, Charger 10, Charger 12, Raider 8, Raider 10, Raider 12, Raider 14 
    (Uses # 40 chain Pitch 1/2" and roller width 5/16") (Uses #101460 lift tube and #9750 5/8" x 69" belt)
     
    1973 model 6-0200 plus  6-9131 - Fits 8hp 4-Speed
    (Uses # 40 chain Pitch 1/2" and roller width 5/16") (Use #102729 lift tube and #102743 5/8" x 65.95" belt)
     
    1973 model 6-0200 plus 6-9113 - Fits 8hp 8-Speed, 10hp 8-Speed, 10hp Automatic, 12hp 8-Speed, 12hp Automatic, 14hp 8-Speed, 14hp Automatic, 16hp Automatic
    (Uses # 40 chain Pitch 1/2" and roller width 5/16") (Use #101460 lift tube and #9750 5/8" x 69" belt)
     
    1974 model 6-0201 is a 37" model
    1975 model 6-0202 is a 37" model

    112 downloads

    Updated

  13. Free

    Snowthrower 37in 1966-1967 ST-376 OM IPL DNA sn.pdf

    Operator manual
    IPL
    12 pages 1.55MB
     
    Drive belt #1576 replaced by 9691 (HA x 70" or 1/2" x 70")

    Snowthrower 1966 37in model ST-376
    1966 serial numbers that have shown up for the ST-376
    272214

    Snowthrower 1967 37in model ST-376
     
    Snowthrower DNA
    All have 2 idler sprockets for the drive chain. Started out as 37" wide and the added wings make them 42" wide.
    1966-67 model ST-376
    1968 model 6-1211
    1969 6-6211 plus 6-9111
    1970-72 model 6-6212 plus 6-9112
    All without front quick hitch so not a direct fit for 1973 and later tractors. Snowthrower rear frame mounts in the front of the tractor frame using 2 bushings and a long 3/8-16 x 8-1/2" bolt.
    ------------------------------------------------------------------------------------------------------------
    Front quick hitch introduced. Snowthrower rear frame has a 5/8" diameter round bar.
    1973-74 model 6-6212 plus 6-9113
    1974 model 6-6213 - (First model to include 8-0221 extensions without the front straight return - just a flat plate)
    1975 model 6-6214 - (First model to include 8-0221 [103552 replaced by 93-1617 and 93-1617-01] side extensions with the front straight return. First model to have a cable spool on chute rotating crank)
    1976 model 6-6215 - This one -
    1976 model 66-42ST01 - and this one are likely identical. The model number format changed.
    1977 model 76-42ST01 - This one
    1978 model 86-42ST01 - and this one
    1979 model 96-42ST01 - and this one plus 1980 may be all the same. They started using a different model number for each model year.
    1980 model 06-42ST01 - (Last 42" model to use 4 grooved rollers for the chute)
    1981-82 model 06-42ST02 - (First model to use plastic collar for the chute but was a retrofit for older models. Last model to use wheels)
    1983 model 06-42ST03 - (First model to use skids)
    1984-87 model 06-42ST04 - (Last model to use a 3/4" diameter driveshaft)
    1987-89 model 06-42ST05 - (First model to use a 7/8" diameter driveshaft)
    1990 model 06-42ST06 - (Last model to use a cable to turn the chute)
    1991-93 model 06-42ST07 - (First model with tall chute retained by 3 individual grooved retainers)
    1993-2001 model 79360 - (2001 and earlier will fit 2002-2007 with kit 105-1503)
    2002-2007 model 79362

    154 downloads

    Updated

  14. Free

    Snowthrower 37in 1975 6-0202 OM IPL SN.pdf

    Operator manual #803957
    IPL
    PSB #356 and #377
    11 pages 519.31KB

    1-stage
    Fits B-80 4-speed and B-100 Auto tractors
    First model to have a cable spool on chute rotating crank handle
     
    Drive belt 102743 (B x 65.95" or 5/8" x 65.95")

    Snowthrower 1975 37in model 6-0202
    1975 serial numbers that have shown up for the 6-0202
    081218
    094637

    108 downloads

    Updated

  15. Free

    Snowthrower 30in 1962 ST-302 ST-3072 OM IPL SN.pdf

    Operator manual #A-7138
    IPL
    2 pages 242.19KB

    ST-302 fits 400 550 401 551 tractors
    Chute belt 1581 (3L x 45" or 3/8" x 45")
    Drive belt 1582 (4L x 74" or 1/2" x 74")

    Snowthrower 1962 30in model ST-302
    1962 serial numbers that have shown up for the ST-302
    A-01387
    A-01905
    A-02221
    A-02291
    A-10123
    A-10680 - May be a ST-3072
    A-26241 - May be a ST-3072
    A-26964 - May be a ST-3072
     
    ----------------------------------------------------------------------
     
    ST-3072 fits short frame tractors
    1961 model 701
    1962 models 502, 552 and 702
    1963 models 603, 653 and 753
    1964 model 604
    Chute belt 1581 (3L x 45" or 3/8" x 45")
    Drive belts matched pair of 1580 (4L x 31" or 1/2" x 31")

    Snowthrower 1962 30in model ST-3072
    1962 serial numbers that have shown up for the ST-3072
    A-01314
    A-01861
    A-02452
    A-10226
    A-10680 - May be a ST-302
    A-10897
    A-10965
    A-26241 - May be a ST-302
    A-26964 - May be a ST-302
     

    214 downloads

    Updated

  16. Free

    Snowthrower 44in 1991-1998 2000 2-stage 79361 Tensioner.jpg

    108959 wooden tensioner block replaced by 95-7699 nylon block
    Suggested idler sprocket replacement
     
    Used on 
    1991-1992 model 06-44SC01
    1993-1998 and 2000 model 79361
     

    18 downloads

    Updated

  17. Free

    Snowthrower 37in 1988 06-37SK01 TIPL SN.pdf

    IPL from Toro master Parts Viewer
    4 pages 259.92KB

    Original operator manual #810507R1
    Fits 252-H 257-H
     
    Drive belt 109221 replaced by 115192 (HA x 127" or 1/2" x 127")

    Snowthrower 1988 37in model 06-37SK01

    1988 serial numbers that have shown up for the 06-37SK01
    45217 - Build date 1987 7304 October 31 Saturday

    63 downloads

    Updated

  18. Free

    Snowthrower 48in 1979 96-48SX01 TIPL SN.pdf

    IPL from Toro Master Parts Viewer
    8 pages 443.17KB

    Fits D-250 10-Speed

    Snowthrower 1979 48in model 96-48SX01
    1979 serial numbers that have shown up for the 96-48SX01
    001584

    31 downloads

    Updated

  19. Free

    Snowthrower Single-stage chain & belt routing.jpg

    1 picture 62KB
     
    Snowthrower DNA
    All have 2 idler sprockets for the drive chain. Started out as 37" wide and the added wings make them 42" wide.
    1966-67 model ST-376
    1968 model 6-1211
    1969 6-6211 plus 6-9111
    1970-72 model 6-6212 plus 6-9112
    All without front quick hitch so not a direct fit for 1973 and later tractors. Snowthrower rear frame mounts in the front of the tractor frame using 2 bushings and a long 3/8-16 x 8-1/2" bolt.
    ------------------------------------------------------------------------------------------------------------
    Front quick hitch introduced. Snowthrower rear frame has a 5/8" diameter round bar.
    1973-74 model 6-6212 plus 6-9113
    1974 model 6-6213 - (First model to include 8-0221 extensions without the front straight return - just a flat plate)
    1975 model 6-6214 - (First model to include 8-0221 [103552 replaced by 93-1617 and 93-1617-01] side extensions with the front straight return. First model to have a cable spool on chute rotating crank)
    1976 model 6-6215 - This one -
    1976 model 66-42ST01 - and this one are likely identical. The model number format changed.
    1977 model 76-42ST01 - This one
    1978 model 86-42ST01 - and this one
    1979 model 96-42ST01 - and this one plus 1980 may be all the same. They started using a different model number for each model year.
    1980 model 06-42ST01 - (Last 42" model to use 4 grooved rollers for the chute)
    1981-82 model 06-42ST02 - (First model to use plastic collar for the chute but was a retrofit for older models. Last model to use wheels)
    1983 model 06-42ST03 - (First model to use skids)
    1984-87 model 06-42ST04 - (Last model to use a 3/4" diameter driveshaft)
    1987-89 model 06-42ST05 - (First model to use a 7/8" diameter driveshaft)
    1990 model 06-42ST06
    1991-93 model 06-42ST07 - (First model with tall chute retained by 3 individual grooved retainers)
    1993-2001 model 79360
    2002-2007 model 79362

    18 downloads

    Updated

  20. Free

    Snowthrower 42in 2001 & earlier 105-1503 kit OM IPL.pdf

    Operator manual #3327-143
    2 pages 53KB
     
    IPL #3327-144
    2 pages 59KB
     
    Adapts 2001 and older snowthowers to fit 2002 and later tractors
    105-1503 kit

    13 downloads

    Updated

  21. Free

    Snowthrower 42in 1995 79262 OM IPL SN.pdf

    Operator manual #3317-223
    24 pages 1.9MB

    IPL #3317-245
    8 pages 

    Fits 260-Series
     
    Drive belt 78-6240 replaced by 92-6991 (HA x 132.5 or 1/2" x 132.5")
    Gates make a 6727BR replacement (1/2" x 131.875" or 1/2" x 131-7/8")

    Snowthrower 1995 42in model 79262 Serial 5900001-5999999

    1995 serial numbers that have shown up for the 79262
    5900941
    5900999

    116 downloads

    Updated

  22. Free

    Snowthrower 42in 1990 06-42ST06 OM TIPL SN.pdf

    Operator manual #810645R1
    12 pages 3.11MB

    IPL from Toro Master Parts Viewer
    4 pages 250.36KB

    Last model to use chute cable
    1990 520-8 & 520-H require completing package 8-1650
     
    Drive belt 9750 (5L x 69" or 5/8" x 69")

    Snowthrower 1990 42in model 06-42ST06
    1990 serial numbers that have shown up for the 06-42ST06
    60353 - Build date 1989 9230 August 18 Friday
    61103 - Build date 1989 9313 November 09 Thursday

    252 downloads

    Updated

  23. Free

    Snowthrower 32in 1972-1973 6-0200 LF MF Basic unit TIPL SN.pdf

    IPL from Toro Master Parts Viewer
    2 pages 128.52KB

    1-stage
    Basic unit
     
    Requires 6-9113 completing kit
    Fits long frame 8-speeds and autos except GT-14 tractors
     
    Requires 6-9131 completing kit
    Fits medium frame 4-speed tractors

    Snowthrower 1972 32in model 6-0200 - Basic unit
    1972 serial numbers that have shown up for the 6-0200
    030632
    834049 - Model 6-0200-7

    Snowthrower 1973 32in model 6-0200 - Basic unit
    1973 serial numbers that have shown up for the 6-0200
    910252- Model 6-0200-8

    108 downloads

    Updated

  24. Free

    Snowthrower 37in 1970-1973 6-6212 LF Basic unit OM IPL SN.pdf

    Operator manual #A-5190
    IPL
    10 pages 794.00KB

    1-stage
    Basic unit Requires 6-9111, 6-9112 or 6-9113 completing pkg for long frame tractors
    6-9113 First model to use the front 8-5551 quick hitch
    Includes PSB #114, 356, 377 and 431
    Requires 6-9122 completing package for the GT-14

    Snowthrower 1970 37in model 6-6212

    Snowthrower 1971 37in model 6-6212
    1971 serial numbers that have shown up for the 6-6212
    754718 - Model 6-6212-6
    754832
    755116 - Model 6-6212-6
    755400
    755444
    755732
    788899

    Snowthrower 1972 37in model 6-6212
    1972 serial numbers that have shown up for the 6-6212
    834766 - Model 6-6212-7
    842858
    842894
    842979
    844051 - Model 6-6212-7
    844519 - Model 6-6212-7
    844549 - Model 6-6212-7
    844798

    Snowthrower 1973 37in model 6-6212
    1973 serial numbers that have shown up for the 6-6212
    908957
    909989 - Model 6-6212-8

    204 downloads

    Updated

  25. Free

    Snowthrower 42in 1987-1989 06-42ST05 TIPL SN.pdf

    IPL from Toro Master Parts Viewer
    4 pages 264.90KB

    520-HC & 520-Series with forward swept front axle require 8-1650 completing package Not required with 06-42ST07 or 79360
     
    Drive belt 9750 (5L x 69" or 5/8" x 69")

    Snowthrower 1987 42in model 06-42ST05
    1987 serial numbers that have shown up for the 06-42ST05

    Snowthrower 1988 42in model 06-42ST05
    1988 serial numbers that have shown up for the 06-42ST05
    45182
    45824
    46227 - Build date 1987 7261 September 18 Friday
    46579

    Snowthrower 1989 42in model 06-42ST05
    1989 serial numbers that have shown up for the 06-42ST05
    50434 - Build date 1988 8242 August 29 Monday
    50776 - Build date 1988 8245 September 01 Thursday
    51040
    51284
    51333
    51424
    51516

    313 downloads

    Updated

Sign in to follow this  



×
×
  • Create New...