Leaderboard

There are no members to show


Popular Content

Showing most liked content since 12/19/2016 in Image Comments

  1. I wanted to put a new add up for my stack mufflers , these are 6" or 8" mufflers with 8" chrome stack , 3" dia body , they have 1" pipe thread inlet but I can build them with a 3/4" pipe thread inlet if you needed , they are baffled on the inside to give the motor some back pressure , These are great for pulling tractors or just to add that custom touch for your daily mower , they are $60 shipped to the lower 48 states only , ( sorry the price went up by $10 as the chrome tip price went up ) , And yes I now have a paypal acc so paying for just got easier for every one , PM me if you need more info , Thanks Jim
    10 likes
  2. 1995 Wheel Horse 416 Hydro. Very nice condition with 895 hours on working gauge. This package includes tractor, tall chute blower, 42 inch deck with power flow bagger, snow cab, chains, and foot control for the hydro. Everything works as it should and all items are in very good condition. This package is ready to work as is, nothing else needed.
    9 likes
  3. Miscellaneous Wheelhorse Parts - some have part numbers and some don't - these parts have never been used - if interested in anything contact summittrees@excel.net for pricing and availability.
    9 likes
  4. This is a 1967 657 that is about 85 to 90% original. I had the engine redone by my Wheel Horse dealer. New Battery and Starter and a new carburetor. The engine is only a few years old. THERE IS NO MOONS OR HUB CAPS. There are a few extra parts kicking around. So $475 or Best offer. NO TEXTING PLEASE.
    6 likes
  5. Up for sale is a original D160 that has the rear tiller, deck, and the optional rear 3 point hitch and front/rear PTO. It also has the factory cooling fan on the rear lines. The tractor runs and drives. The gas tank is like new inside which is hard to find on these. The tiller works but I've never used it. The deck is unknown as I pulled it off as soon as i got it but it looks complete to me. It comes with tractor manuals, engine manuals, and extra engine tune up parts like oil filter, air filter, etc. I don't want to sell this but due to space and a change in plans for it I have no choice. Tractor is located in Ringgold Georgia where is as is sale....no shipping. PM me for more info Thanks, Clay
    6 likes
  6. For sale is a fully rebuilt 4 speed trans. I took it completely apart, soaked in mineral spirits than cleaned everything with brake clean. Beadblasted every thing and then rinsed with brake clean again. All gears are in good shape, Anything worn was replaced. Installed all new needle bearings, seals and gasket. 1533 bearings were cleaned and are in good condition. Trans has been ran on bench with electric motor and everything works good and there are no leaks. It will be primed and painted with rustoleum regal red by the end of the day. This is located in South Haven, Mi I can also ship this to just about any place in the U.S. for around $50-$80 though fedex. I also have hubs, the drive pulley and brake drum as well as hitches that can come with it for a little extra. Thanks, Jake
    4 likes
  7. whtractors24

    rj-25

    Selling or trades. (Must be clean ) found another machine I been hotnon for 2 years . rj-25 it has the proper cast Briggs 8 with air vane governor . The machine has been fully rebuilt from motor to rear end . The tractor hasn't been started since full rebuild It has assembly lube in motor and transmission . I don't have plans to start it . The motor is all nos parts including tank and many other parts . I don't Have a second thought in my mind it won't be perfect once started . Once you own it your more than welcome to start it . The hood is fiberglass. Any other questions I can be reached at 860-681-3610
    3 likes
  8. I have a complete swept front axle WITH steering reduction. This includes everything (but the nuts and bolts) to convert your tractor. Everything is in good usable condition. The front wheels could use some paint but they are not pitted. Does not include the steering wheel, but if you need/want one I can include one for $50 more. Let me know if you need more pics. $375 SHIPPED to the lower 48 states.
    3 likes
  9. Pete Monteiro

    1054

    Tractor is in great shape. Appears to have been restored at one point in its life. Runs good, tranny is good. Seat is in great shape. Hydro lift pump does work but cylinder was removed. In search of a few engines. Kohler command ch18,ch19,ch25,ch27. Kohler opposed twin kt17,kt19. Kohler k361, briggs opposed twin 16hp,18hp .
    3 likes
  10. J.A.

    1960 suburban

    Restored 1960 suburban. Needs finished- needs rubber fuel line, throttle and choke cables and the key switch wired up. I have about 1300 in this tractor. Asking 950 or will take partial trade for 1964 and older round hoods.
    3 likes
  11. comes w/ 42"deck,48"snow blade,42" serviced sold the blower
    3 likes
  12. I have a Wheel Horse official Onan service tool kit. ON-420-0556 All parts are included and it is completely unused.
    2 likes
  13. Looking to sell this hy-2 setup. Came off my 753 i am working on. Im not sure if it works or not because i havent got the tractor running. I prefer the look of the lift arm on my tractor so i went with that route. I also have the cover but its not pictured.
    2 likes
  14. 1967 Model 1276 tractor with 48" mower deck, 56" Plow Blade, and Roto Tiller attachment. 12HP Kohler engine with many new parts. Runs strong. Hydro-drive. New Battery, starter/generator, coil/points, plug, cooling fan. regular service with oil and filters, belts and pulleys. Great project for restoration.Original tires, pretty dry but hold air.
    2 likes
  15. HD-42 Dozer Blade for 400, 401, 550, and 551 Wheel Horse Suburbans. Included in the sale will be a copy of the dozer blades Parts List and Instructions. I have reconditioned the rear mounting bracket, but as you can see, I just never got around to reconditioning the rest. The plow is 42" long by 16" wide by 20" tall and weighs approximately 65 pounds. I will put it on a pallet and take it to the nearest Fastenal for shipment, or hold it for pick up once payment is received. . Please PM me if interested.
    1 like
  16. Comes with snow plow, mower deck, and a set of chains. It has a new old stock 4 hp Briggs on it that has a half hour running time on it. Still has paint on the exhaust. Needs drive belt. Nice little tractor. Thanks John
    1 like
  17. I have a good pair of rear deep dish rims off of a 520. PM me your cell number or email for pics. $100 plus shipping.
    1 like
  18. Hi everyone. I am in search of a set of WH hubcaps, preferably with the red horse logo for 8 and 12 inch wheels to fit on my 1257. Willing to trade for snowblower attachment for a 200 series WH. Located in Herkimer, NY.
    1 like
  19. scotty

    Roundhood gas tank

    Selling this wheel horse gas tank not sure on what it came off. In decent shape. Good candidate for a paint job.
    1 like
  20. Wheel Horse 312-8 with plow blade. Please call or text if interested. Can send pics through email. Roughly 900 hours on machine. Asking $500. thanks!!!
    1 like
  21. 82Caddy

    D-220 with loader

    Here's the project thread: Basic details: 1974 D-200 3 point Rear PTO 22hp V-twin predator engine (I'll have to check the hour gauge for number of hours on it) Exhaust stacks out the sides SEW flywheel adapter/custom stub shaft coupler for pump JD 5 port power steering column with power steering ram Cub Cadet super steer front axle (designed for power steering 5 lug wheels/trailer hub fronts Ribbed front tires Maxxis ag tires weight bench weights. JD 420 PTO (currently uninstalled but wired) and correct adapter for 1" PTO Comfort seat spring Newer Toro seat with arm rests (has slide to accommodate different size operators Fuel tank on fender Electric fuel pump on switch. Factory throttle/choke levers with new cables for predator engine All lights work and are on individual switches Hydro is strong and it pushes like an ox - it'll dig holes in dirt and sand with the rear tires Ark-550 loader - correct d series subframe and pump setup Lift arms replaced with new ones -I have the old ones. One has pitting and doesn't seal around the shaft, the other is fine and dosen't leak tilt cylinders re-sealed spool valve replaced New hoses from spool valve to first T-connection weight box (concrete filled) The electric PTO is currently not installed, it is wired up though. I put a single pulley on the PTO shaft to run the pump for the loader. I decided since I built this tractor to have a loader on it, there was no reason to have the electric PTO. I positioned the engine based on this specific PTO. Belts line up well for the rear PTO and for the loader pump with the electric PTO. I figured if I ever wanted to take the loader off and put a snowblower or mower deck on the tractor I would have everything lined up already. However, I do have it and it goes with the tractor. Issues: -There is a leak from somewhere in the power steering. I've been tracking this down and think I have found the leaking hose (helps if everything is tight). -Brake pedal is disconnected -No parking brake - rod removed and spring holds the parking pawl in the disengaged postion -Motion control lever rubs on steering wheel if in the right spot - lever needs to be bent a bit more (just haven't done it yet) Couple pictures (do not show new hoses or lift cylinders): I really like this tractor and had zero intentions of ever selling it. It is a project tractor, functional but still a project. I have been using it to move mulch, compost, rocks or anything else that I didn't want to lift with my back or drag things around. If it doesn't sell, I'll continue to work on it and make improvements over time. If someone is legitimately interested, I will get current photos. Located in Rochester, MN 55906. I'll work with a buyer on delivery/transport if needed. 2200$ is the price. I don't have to sell but I could use the funds for other things. This is the only place the tractor is listed as of now. Not on Facebook or craigslist, figured I'd give the group here first shot at it before resorting to the crazies elsewhere.
    1 like
  22. I have a 42 blade on my C-161 but it doesn't really cover my tracks when angled. I was wondering if anyone has a solid 48" blade they don't need. I only really need the actual blade since my frame and mechanism are in very good condition. Craig
    1 like
  23. DanKepple

    D160

    D160. Needs work, runs and drives could be in better shape. Has deck. I also have the grill its just not in it. No rear pto or 3pt hitch. Bought it with a stuck motor had a blown head gasket. I put a new head gasket into it and recently the automatic compression release has been acting up i think i fixed it but not 100% sure.
    1 like
  24. Up for sale is an original RJ heat shield, this isn't a repop. Asking $85 or best offer plus $8 shipping
    1 like
  25. papaglide

    1998, 314-8

    Hey guys, I am selling my 314-8. She is a 1998 with 1994 hrs. The tractor runs sporadically right now, it needs a carb cleaning. It ran great until the carb issues. There isn't a spot of rust on it, it was well maintained by the previous owner. I am the second owner. I am including the original paperwork: manual, receipt and a few other items. The front tires also loose air after a few days. It also has a newer style 520 seat on it. It comes with a 42"SD deck and a cup holder which I installed after I bought the tractor. The engine also is weeping oil. I have it on jack stands so the front tires don't get flat spots, with tubes they will be fine.
    1 like
  26. Furious

    1277 Parts

    I have a 1967 1277 that I'm parting out. Hood, seat pan in good shape, no dents, some surface rust. I'll upload photos soon. Also have the hydro transaxle assembly. No idea how much shipping would be, but if you're interested, I can inquire. $30.00 ea for the hood and seat pan. Make an offer on the hydro. I have lots of other parts from the tractor, let me know what you're looking for and I'll see if I have it. In the military and moving in the springtime, so anything not gone is going to have to go to the dump.
    1 like
  27. Tinys

    88 520h with 42" deck

    88 520h with 42" deck. Would love to keep but out of work now and need to sell a few things. We bought it in September locally. New battery and hold down. New deck belt and pto belt. Rebuilt Muel drive and rebuilt spindles on the deck. I purchased all new bearings for the pto but haven't installed. Fuel pump went out on the last cutting of the year. It will fire and run with gravity feed auxiliary tank. Was going to put electric pump on it. Deck and tractor have some rust. Deck has one spot rusted through. Belt guards are missing from deck. Location is in Darlington md. Phone number is 4108084658. Leave a message or text. I will try to get more pictures tomorrow. Thanks
    1 like
  28. SALTYWRIGHT

    GT-14 WITH 3 POINT

    GT-14 WITH 3 POINT AND SNOW PLOW AND CHAINS .RUNS VERY GOOD. NO RUST. THIS IS A HEAVY TRACTOR. MUST SELL DUE TO HEALTH. RUSS
    1 like
  29. 67-877

    1969 GT14 and Raider 12

    1969 GT14. Runs great, has rebuilt carb, new battery, new lift hose, inner wheel weights, engine and trans just serviced, 42" blade, 12" 3 point plow, 3 point hitch, deck, package deal with a raider 12 someone started to put a 14hp into and never finished. Head is currently off to put thread insert in plug hole, have new head gasket. I've never heard it run but it's supposed to. Also has deck.
    1 like
  30. Thanks for checking this out, I bought this Charger 9 about a month ago - and I enjoy it. I don't need it gone, but would rather have myself a nice Raider. Amazing tractor for its age. It's a '68, doesn't have a stock steering wheel, but have one that I'll throw in. The Chevy emblem is off. New battery, hoses and new filter. Am open to trades, must be running!
    1 like
  31. This is a 42" single stage tall chute snow blower. Everything spins freely. Has surface rust. This does not come with the lift bar. I will include the blower, belt and lift flag. You will need the bar in order to use it. $100 or best offer. Thanks! Dave 401-218-3586
    1 like
  32. Up for sale is a used seat and steering wheel for a 420 LSE. I replaced both with new OEM. Condition shows in pictures. I listed these on ebay as well. PM me if interested. I would also consider a barter of some sort for a nice original patina round hood. Not interested in anything that has been repainted. For the right machine I would be willing to come out of pocket some cash.
    1 like
  33. This is a shot in the dark, but is anyone interested in buying a parts tractor. I'm pulling the tranny and the plastic dash out. There's a hood, some chassis parts, rims, steering parts, front end parts, etc... Do have the fenders but they're rusty. Motor is partially torn apart. It's stiff. I have everything for it except for fuel pump. Anyone interested?
    1 like
  34. wh500special

    520-H with 48" deck

    1988 520H. Has wiring issues but does start and run. Starter drags and doesn't always let go when the engine fires. Will need a battery. Filthy dirty. Looks a little better in the pictures than it really is. Throttle cable is broken so it only runs at wide open throttle. has a 48" deck that I have never used. Previous owner was mowing with it before I bought it so I guess it is OK. Pick up in St. Louis, MO.
    1 like
  35. W9JAB

    It"s Worth a Lot more

    It"s Worth a Lot more But it needs A new home! The pinnacle of belt and sheave technology 1966 856 Mower deck Blower Blade This will drag your big box tractor down to the dump any day!
    1 like
  36. I'mselling a mid 80's wheelhorse 516H. It was running when I used it last but now turns over but won't stay running. I'm sure it's an easy fix. It comes with a 42" deck that has a couple holes on the left but mows fine. I'm asking $450.00. If interested please message me. I can't upload pics for some reason, so message me your number or email.
    1 like
  37. BMazzer

    310-8 w/ extras

    1988 Wheel Horse 310-8 for sale. Runs well, miniscule oil usage from original engine. Includes: 37” side discharge mower (solid, spindles kept greased), NIB OEM mower blades, 42” snow blade (frame needs weld), Tire chains, NIB fuel pump, manuals, misc small parts. Paint is rough, peeling in places, no rust through. Original owner. No trades. Will not sell deck separate from tractor. Blade available if no interest in package. E-mail or PM for phone number.
    1 like
  38. DanKepple

    520h

    Motor will turn then get stuck. Choke is sticky. Coil is missing had water in the oil when i drained it. I crossed the starter it will turn then get stuck might just be rusty in the cylinders who knows. Just dont have the time/ patience to pull motor 350$ at least. deck looks to be in good shape and blades do spin. 269 hours on motor
    1 like
  39. Camarokid

    1996 314-8

    Previous owner jb welded a new a new spark plug in the head because the threads were stripping could Healy coil it, but runs and starts up great. Rear tire has a leak but good tread and front tire is worn. Has about about 1167 hours on it from what I remember and it still counts. No use for it only purchased because I planned on doing pulls. Make an offer thank you!
    1 like
  40. Must sell. Moving. Original hours, engine runs great. Had hydro issue, maybe.. I have extra pump. Not experienced with these. Let me know. Will post soon an Craigslist.
    1 like
  41. Jerry77

    Eaton 1100 drive belt

    Got this drive belt from a 418A from richmondred01 with a tranny I bought from him..it is too short for my use and is free to anyone that wants it.. I believe it is 5/8 by 82 inches, but you should check 418A specs to be sure..it looks very good - no cracks or anything..
    1 like
  42. hcminis

    Wheel Horse C-120

    UPDATE: Willing to trade this complete tractor for a front Tombstone weight with handle. Decided to sell this C-120. Just can't get used to square hoods. This tractor has been recently repainted by previous owner. Mower deck is quite and does a good job mowing. Tractor is in very nice shape. Buying AS IS. Asking $600.00 obo. Would consider round hoods as trade. Located in Coatesville, IN. 317-491-3106.
    1 like
  43. 701 for sale with new 8hp longblock and orginal mower deck.
    1 like
  44. Wheel Horse C-160 16 h.p. kohler with new PTO clutch Good working order Less than 50 hours on new engine. New battery Very solid tractor, lots of power Tiller Snow thrower Belly mount grader blade Assorted hitches I also have a mower deck with mule drive to go with tractor TEXT 260-703-1044 for questions.
    1 like
  45. Selling off some of my Wheel Horse inventory. I have been keeping several of these tractors for the past few years to have a future projects that I never got around to so I am cleaning out the pole barn. 520-H - $600 1997 model with 592 hours. Very nice tractor. Does smoke a little at startup. We have been using this tractor to cut grass for the past 2 years every week. No attachments, just the tractor. C-161 Auto - $100 - This is just a rolling chassis, the motor has since been removed. There is a leak in one of the hydraulic lines. Overall a very nice chassis and sheetmetal. Tires -$60 are 26x12-12 Carlisle turf. They have excellent tread depth. One has a slow leak. With a tire tube it would still have a lot of life left in both tires. Thanks! Thad
    1 like
  46. Original 401 Suburban with a Clinton 1290, functioning mower deck and snow plow. Ran great when stored a couple years ago. It has original serial numbers on the tractor frame and mower deck, tires are good, has the typical repair on the gas tank straps and it leaks oil around the axle seals. $525.00 Must be picked up, No time to meet or ship sorry!
    1 like
This leaderboard is set to New York/GMT-05:00