Jump to content
odee61

416 8 Onan / 312 Hydro with a 12 HP Kohler

Recommended Posts

odee61

Will the PTO work from the 312 Hydro with a 12 hp Kohler onto the 416-8 Onan?  My PTO disc went today. Any help would be most appreciated.

Edited by odee61
wrong model number originally listed

Share this post


Link to post
Share on other sites
 
Achto

Unfortunately I am unable to answer your question, and I don't want to guess. So just let me offer a :WRS:.

 

Someone who knows for sure should be along shortly. 

Edited by Achto
  • Like 1

Share this post


Link to post
Share on other sites
 
pfrederi

What is an 812H Kohler? 

Share this post


Link to post
Share on other sites
 
odee61
2 hours ago, pfrederi said:

What is an 812H Kohler? 

8 i'm not sure, 12 it's a 12hp kohler, H it's hyrdro (transmission and hydraulic lift. I'm new to this. Learning everyday. I love Wheelhorse. Thank you for your response.:wh:

Share this post


Link to post
Share on other sites
 
Handy Don

So maybe a 312-H. Kohler engine?

The 416-8 is an Onan engine. 

 

Really important that you post the model and serial numbers of both of your machines (tags with this info are on the rear fenders near the left side of the seat) so that someone can give you clear answers about parts interchangeability.

 

Share this post


Link to post
Share on other sites
 
squonk

If you're talking about the PTO clutch disc measure the O.D. If it's the same then yes it will fit.

 

Share this post


Link to post
Share on other sites
 
odee61
4 hours ago, pfrederi said:

What is an 812H Kohler? 

Really sorry, it's a 312 Hydro with a Kohler

Share this post


Link to post
Share on other sites
 
pfrederi

They will interchange...

  • Like 1

Share this post


Link to post
Share on other sites
 
odee61
6 hours ago, Handy Don said:

So maybe a 312-H. Kohler engine?

The 416-8 is an Onan engine. 

 

Really important that you post the model and serial numbers of both of your machines (tags with this info are on the rear fenders near the left side of the seat) so that someone can give you clear answers about parts interchangeability.

 

Thank You

Share this post


Link to post
Share on other sites
 
odee61
5 hours ago, pfrederi said:

They will interchange...

Thanks a million. Wish I found this forum a long time ago. Swapped them today, everything seems to be ok. I'll eventually replace both PTO's as I use both machines. Thanks again.

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • Blackhood Bill
      By Blackhood Bill
      Wanting a headlight wiring harness for a 416-8. The machine has the 16 hp Onan.
    • Boyd
      By Boyd
      wheel horse garden tractor mower, rear discharge mowing deck & snow blower both in good condition and runs well. all the parts for the snow blower are with it.
       

    • SPINJIM
      By SPINJIM
      1992, Wheel Horse 520-H.   Onan overhauled: New rings, cylinders honed, valves lapped, new carb., new seals and filters, new fuel lines and primer bulb for easy starts.  Seat is like new.  Front tires are new.  All tires hold air.  Some repainting, but didn't need much; was stored indoors.  New decals.  Other new parts.
      Has swept front axle and Variable Ratio Steering.  Belt cover ventilated to cool back cylinder.  Rear wheel weights are 55 lbs. each.  
       




    • johnnymag3
      By johnnymag3
      416-8  clean machine, one owner, M16 Kohler...............no smoke, knocks, etc. Only 771 Hours.
       
      42" Rear Discharge deck   NO RUST    blades used 1 season
       
      48" plow very nice condition, 
       
      Wheel Horse weights, on tractor already
       
      AG Tires on rear,used one season, front tires great condition. Rears are filled with beet juice, done at a Dealer professionally,  ....non toxic, non corrosive.  Traction Galore !!!
       
      Machine is fully serviced, ready to work. NEEDS nothing....Look below for pictures
       
       
      JOHN   845 797 5716 cell
       
       
       
       
       
       
       
       
       
       
       
       
       
    • woodbird007
      By woodbird007
      Need help adding oil drain piping to Koehler K241 with 1/2” drain plug
×
×
  • Create New...