Crazy homemade attachments.
By
Ifixoldjunk, in Implements and Attachments
-
Similar Content
-
By Tim's Toy Tractor
Two 3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
These tires are New, Never Used! Not the cheap China ones, these are High Quality Firestone Tires!
Size: 16x6.50-8
Great for any Garden Tractor or Riding Mower
They are mounted on original Wheel Horse wheels that have been sandblasted & epoxied, and painted with ivory colored paint, note there are a few chips along the inside bead from mounting the tires. The rims will need your specific size wheel bearings installed.
$99.00 Call Tim @ 1-313-460-8858 (Local Pick-Up Only, No Shipping)
-
By DevonianHorse
Hi all, on a 1977 Wheelhorse C-100 (Belgium made), I have a question
My Wheelhorse hood opens really far- it does eventually stop but I don't think it is meant to go this far and that there's a piece missing.
In this photo, there's a hole you can see (near the middle of the pic, 1/3 down) and the same on the other side of the hood mounting part of the frame- I assume some sort of bar is meant to go between them that the hood latches at the base will catch on and this stops the hood dropping further when opened? If this makes no sense sorry- I have simply always assumed that the hood is meant to open at a right angle from the front, but having seen videos, I can see most stop before that.
Does anyone know the part I need, or would two bolts, one on each side, do the job? Mine has never had one, so I am unsure.
Thanks!!
-
By Donavon1
Need some help deciding on a brand of engine to buy for my 1054. (Needs to be a diesel 10 hp+) I’m refining used motor oil/cooking oil for fuel for it. So it will have to have an option to run used oil and diesel
-
By MainelyWheelhorse
Hi All, I’m a member of the RedSquare Facebook group, some of you may have seen My tractor there. I have a 1992 312-8 with a 37 inch deck. It came with a house my brother bought, and was given to me. It needed work but just minor things. I mow my lawn with it, and I just bought a plow to push snow/dirt so it’s a working restoration. It was relatively well taken care of by the previous owners so it really just needed a refresh. Anyway see you around the site!
-
By Donavon
Need ideas to convert my 1054 A Frame plow into a snow blower
Any idea's?
-