C125 PTO Drive Belt for 42in Mower Deck

[Tim Fenn 0]

I've just acquired a renovated C125 but unfortunately the drive belt got snagged with the mower deck belt (maybe because of incorrect fitment?). It looks like I'm on a steep learning curve! I've been trying to find out which belt to buy as a replacement. The belt I've just taken off is 94 inches but  according to the parts manual I need a Toro belt part number 94 2501 which is 103 inches? The mower deck is a 42in rear eject. It's funny that the Toro belt has 94 2501 as the part number but is 103 inches & I apparently need a 94in belt? Any ideas? 

[peter lena 9,868]

tim , i use a 95 1/2 " on my 42 " r/d deck , on my c series and others. you could go over to tractor supply if close by and pick one up . pete

[gwest_ca-(File Mod) 12,214]

Click on the fuzzy pictures. There was a change in the belt recommendation

Garry

[Tim Fenn 0]

On 7/15/2020 at 12:55 PM, peter lena said:

tim , i use a 95 1/2 " on my 42 " r/d deck , on my c series and others. you could go over to tractor supply if close by and pick one up . pete

Many thanks for your help Pete. I've ordered a longer belt as per the message below. 

[Tim Fenn 0]

On 7/15/2020 at 1:30 PM, gwest_ca said:

Click on the fuzzy pictures. There was a change in the belt recommendation

Garry

Thanks so much for this!!! Great to know there's plenty knowledge out there. Mine's a Belgium made Wheel Horse sold by Mountfield here in UK. Also trying to sort out the fueling converting from a mechanical to an electric fuel pump as mechanical kept failing once operating temperature was reached. Am on steep learning curve!! 

[peter lena 9,868]

hello tim, i also switched over to a CARBOLE MICRO ELECTRIC FUEL PUMP https://www.amazon.com/CarBole-Universal-2-3-5P-S-I-Operating-Self-Priming/dp/B01IR6BNKY/ref=asc_df_B01IR6BNKY/?tag=hyprod-20&linkCode=df0&hvadid=344022366619&hvpos=&hvnetw=g&hvrand=677146171663416917&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003292&hvtargid=pla-728856725506&psc=1&tag=&ref=&adgrpid=70731225593&hvpone=&hvptwo=&hvadid=344022366619&hvpos=&hvnetw=g&hvrand=677146171663416917&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003292&hvtargid=pla-728856725506 , VERY GOOD QUALITY . mounted on a steel bracket off the frame  , cannot hear it run , will sent a picture as soon as i can find it , pete 

[peter lena 9,868]

hello tim , i found my pictures on fuel pump installation , lots of related information here , worked out well, pete