Ed Kennell 47,362 #10151 Posted yesterday at 05:01 PM 4 minutes ago, 953 nut said: I cheated death twice so far this year, Ya gotta be tough to get old. We're all glad you'r still playin Richard. 3 1 Share this post Link to post Share on other sites
ebinmaine 80,714 #10152 Posted 19 hours ago Today we went for a drive a couple hours north to look at 5 pieces of land. https://maps.app.goo.gl/ujErC4DzcvZ4o78u6?g_st=am Saw lots of beautiful scenery and in fall color peak too! We'll be requesting more info on two of the 5 pieces for sure. Possibly 3. After that we got the garden area path bridge set in place. That's in its own thread. 2 Share this post Link to post Share on other sites
8ntruck 9,301 #10153 Posted 18 hours ago We are in Wyoming, visiting my sister. Getting some good entertainment out of one of her cats and our dog. It is a mostly outdoor cat, but seems to enjoy sitting outside of one of the several patio doors in the house to aggrivate the dog. My sister's property is just over 30 acres of ridges and hills. Dog and I found ourselves on the far side of a 20 foot cliff on our walk today. The approach looked like it was going to be an easy down hill into the valley between the next ridge - until we walked up on the top of the cliff. Ended up following the top of the cliff until it shrank into nothing. Walked just under a mile. My Garmin claimed that I decended 120 feet, before climbing back to the house. 1 4 Share this post Link to post Share on other sites
Achto 32,715 #10154 Posted 17 hours ago Started some physical therapy today. Started out by turning the ends down on some 5/8" rod in order to make a new tie rod with replaceable ends for my 953. Changed the sediment bulb and gave it an oil change. Next I made a bracket so I can hang dumb bell weights on the front. Finished off by preparing some 7" x 5/8" round plate to use as my dumb bell weights. These weight about 6lbs each. I have enough room to hang 13 of these on the front. The 78lbs should help hold it down. 8 Share this post Link to post Share on other sites
WHX?? 58,143 #10155 Posted 17 hours ago Check my oil and air up the fronts is all I gotta do. Pullstart can put on the dual if he wants. I got those front wheel weights you wanna throw them on Dan. 2 Share this post Link to post Share on other sites
SylvanLakeWH 32,524 #10156 Posted 17 hours ago 3 minutes ago, Achto said: Next I made a bracket so I can hang dumb bell weights on the front I was expecting to see a chair on the front end with some one from @Pullstart's plow day sitting on it... 4 Share this post Link to post Share on other sites
WHX?? 58,143 #10157 Posted 16 hours ago I got all coked up today ... the evaporator fan wires were brittle and cracked and a short waiting to happen. Unit bearing motors are not meant to be taken apart and this one was hardwired. I was up for the challenge and replaced the cable. Rewired the rest of the cooler while I was at it. I dated this thing around early 50s. 7 Share this post Link to post Share on other sites
Pullstart 71,256 #10158 Posted 7 hours ago 9 hours ago, SylvanLakeWH said: I was expecting to see a chair on the front end with some one from @Pullstart's plow day sitting on it... I am bringing a friend, that would give Aaron a bird’s eye view of the action! 2 1 Share this post Link to post Share on other sites
953 nut 69,339 #10159 Posted 5 hours ago 11 hours ago, Achto said: dumb bell weights. They prefer to be considered Intellectually Challenged weights. 5 Share this post Link to post Share on other sites
