What have you done to your Wheel Horse today?

[WHX?? 46,801]

You did desko... my bad

Still a good price for meats like that. Unbelievable how the prices went up since covids. Yah supply chain issues... whatever.

Do  I need to start a ugly seat contest again tho? 

[BrianKoch 293]

Hitched the cart up and hauled dirt off into the woods

 

[kpinnc 10,740]

On 5/15/2023 at 6:33 PM, kpinnc said:

Now I have to finish the new manifold. That'll bring the muffler in another 1.5 inches toward the hood. 

 

Got the manifold made up tonight. Had to make a huge adapter to fit the muffler, but this manifold is for this engine. The diameter should be fine. 

 

I had to weld a recurve drop in the adapter to get the muffler in the right place, but it will pull the whole thing a little closer to the hood. Ugly, but it will work. 

 

Also made a brace to support the whole thing that uses the PTO brake bracket. I always remove them anyway.

 

 

Edited May 17, 2023 by kpinnc

[Desko 552]

9 hours ago, WHX?? said:

You did desko... my bad

Still a good price for meats like that. Unbelievable how the prices went up since covids. Yah supply chain issues... whatever.

Do  I need to start a ugly seat contest again tho? 

Definitely! I dunno I don't think my seats will win any contests but they're getting there 😂

[BrianKoch 293]

Only 36 more bags to haul!

 

 

[kpinnc 10,740]

Well, my manifold is ugly, but it did the trick.

 

First pic is "before" and second is after. Tucked in nicely, but not so close as to burn the hood paint.

 

Added a diagonal brace to support the weight as well on the brake tab.

 

 

Edited May 17, 2023 by kpinnc

[Bill D 1,600]

Nice.  At any point were you temped to install a stack or straight pipes?

[D_Mac 8,226]

@kpinncnice work. Did you make the heat shields as well. I would like to try that some day. 

[TJ5208 1,823]

[kpinnc 10,740]

1 hour ago, Bill D said:

Nice.  At any point were you temped to install a stack or straight pipes?

 

No sir. This muffler combined with this engine sounds like a "soft spoken" Harley. That's why I modded so much to make it work.

 

I got nothing against stacks, just not my preference. I'd probably hit it on something... 

 

1 hour ago, D_Mac said:

Did you make the heat shields as well. I would like to try that some day. 

 

Yep. Go back to the previous page in this thread. It's just perforated stainless from Fleabay, but it works.

[Ed Kennell 35,809]

After three wet mowings, I took the 42SD off for cleaning.     

 

Put the 42RD on.

  

 

Did a little test run.

 

Finished cleaning the 42SD and gave it the Geasy  Pete oil bath.    Bake it in the sun for a few days than store till next spring.

 

 

 

Edited May 18, 2023 by Ed Kennell

[19richie66 16,943]

7 hours ago, kpinnc said:

Tucked in nicely.

 

Edited May 18, 2023 by 19richie66
LOOKS FANTASTIC!

[mrc 727]

nice work on that muffler guard kpinnc!

[Pullstart 59,734]

Did a little food plot work…

 

 

[Pullstart 59,734]

Did some more food plot work.

 

 

[Pullstart 59,734]

Right up until I noticed a wet dash…

 

I blew a hydraulic line and learned from @PeacemakerJack.  Stop where you are!

 

I’ll see if I can get the tiller lifted out of the ground, then flat tow it back to the barn for repairs.

 

 

[Pullstart 59,734]

Safe and sound.  Rylee came to my rescue with Putt Putt and we towed Colt back to the barn.  No, the seat isn’t bolted down 

 

 

[D_Mac 8,226]

Spent some time scrapping the dirt and grim off the 310 today. We looked the engine over and no sign of damage. Bore stamp on the piston. Head gasket and carb ordered. Excited to get it started.

[Pullstart 59,734]

 

[8ntruck 6,376]

It was raining today, so I was just putzing around my shop.  Finished a couple of minor projects that were cluttering up the bench, and did some minor cleaning. 

 

While walking the dog, I had cooked up a plan to rehab the seat on Clyde the C-195.  Since the rain had dampened plans for brushing another coat of stain on the dock, I went into the tractor shed and took the seat off of Clyde.  Got it into the shop and removed the crusty seat cover and padding.  I was hoping to be able to wire brush the seat pan and patch a couple of rust holes then make a new seat pad.  Unfortunately, the front 3" of the seat pan were basically rust just waiting to crumble into oblivion.  Yes, it could be fixed, but time wise, it will be better to get a replacement seat and be done with it.  Think I'll go with one of the steel pan seats from TSC.

[pfrederi 17,147]

21 hours ago, Pullstart said:

Where are the rocks...NEPA deer eat rocks...

 

[Pullstart 59,734]

@pfrederi I found a handful, the size of a baseball.  Not too many bigger than a cabbage around here 

[ebinmaine 63,166]

19 minutes ago, Pullstart said:

@pfrederi I found a handful, the size of a baseball.  Not too many bigger than a cabbage around here 

 

I know you put words about rocks but none of them made any sense.  

 

Ain't much rocks he says...

Remember the rocks in this video were ALL taken from a space about 60 x 80 FEET.  

 

 

 

 

 

 

 

 

[SylvanLakeWH 24,155]

22 minutes ago, ebinmaine said:

Remember the rocks in this video were ALL taken from a space about 60 x 80 FEET

 

That's convenient...! Didn't need to go very far to get rocks to build the wall... 

 

Helpful thought heh? 

[D_Mac 8,226]

26 minutes ago, ebinmaine said:

 

I know you put words about rocks but none of them made any sense.  

 

Ain't much rocks he says...

Remember the rocks in this video were ALL taken from a space about 60 x 80 FEET.  

 

 

 

 

 

 

 

 

How long did it take your better half to build that wall ?