Jump to content
Steiner430!

Transaxle fitment

By Steiner430!, in Transmissions and transaxles

Recommended Posts

Steiner430!    0

Steiner430!
Posted

Will a c series transaxle fit in a b series? The dip stick tube looks to tall to fit under the fender. What modifications does it take to make this work?

Share this post

Link to post
Share on other sites
 

rmaynard    14,924

rmaynard
Posted

What is the model number and year of the C-series, and the model number and year of the B-series? Any 1974, 75, 76, and 77 C-series will interchange with the same year B-series Uni-Drive transmission. The 1978 and later C-series had a tall dipstick tube which can be removed and replaced with a short one from the B-series, or plugged with a 1/2" npt pipe plug.

 

:WRS:

  • Like 3

Share this post

Link to post
Share on other sites
 

daveoman1966    3,624

daveoman1966
Posted

You MAY have to swap out some linkage and change the filler spout but it should otherwise be an easy swap-over.  Here is the almost universal frame-to-trans bolt pattern.

 

PATTERN-1.jpg

Share this post

Link to post
Share on other sites
 

KC9KAS    4,741

KC9KAS
Posted

@Steiner430! :text-welcomeconfetti: to :rs:

Share this post

Link to post
Share on other sites
 

SylvanLakeWH    24,231

SylvanLakeWH
Posted

:text-welcomeconfetti:

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • giant_g2
      8 spd Transmission for sale
      By giant_g2
      Not sure on specific model. This 8 spd came attached to a plow I bought. It had some water in it for a couple weeks according to the prior owner. I drained it, sloshed some diesel in it, drained that, then filled with fresh oil. Spinning the input shaft by hand, I can see the axels turn. Hasn't leaked any oil. I'm not really interested in shipping, so I'd prefer local sales.

    • rustyedge1
      Wanted K181 Kohler Head 8
      By rustyedge1
      Need head for WH K181 S Kohler. Mine has spark plug hole stripped.
      Reasonable priced, shipped.
       
       
    • jmack
      D-180 Transmission Dipstick
      By jmack
      I’m looking for a transmission dipstick to a D-180. Let me know if you see one. 
    • Doug B
      GT14
      By Doug B
      Hey guys,I have a dilemma I need some help with. I have a 1969 GT 14 that I replaced the transmission and pump on. For about 2 weeks afterward everything worked great, but while mowing at a pretty good pace I noticed a shudder and the tractor slowed a little but not bad. The more I rode it the slower it got until it barely moves. What stumps me is the hydraulics are still very strong,as in I can back the 3 point under the bumper of my truck and if you lift the arms all the way up the front wheels of the tractor will clear the ground. Have checked the tow valve and checked the internal filter,but no luck. I have also checked and replaced the forward and reverse bypass springs and the lever is moving the cam to full travel, forward and reverse. Any help would be appreciated.
    • Evguy
      Electric Horse
      By Evguy
      I recently purchased a GT1800 with a blown engine with the intent of conversion to electric. 
      This is my first Wheel Horse and I have never seen it running. I need a little work on it but it looks sound.
      I will not be hacking it up, If this project goes poorly, I would want to bring it back to stock operation with new engine.
       I will be creating a blog at some point to show conversation. 
      Budget will be tight, I will be using parts from past projects, but motor will be new permanent magnet DC. 
      Voltage will be 48v, as many old lithium batteries that I can fit in. I plan to retain pto clutch.
       
       

×
×
  • Create New...