Jump to content
Sign in to follow this  
SharonBen

Whining Sound when mowing

Recommended Posts

SharonBen

I have a '89 (I believe) 310-8 model with a 37" side discharge deck.  I have found a lot of good information out here but haven't asked a specific question - til now...

 

I'm getting a whine from the mower drive system whenever I hit thicker grass.  The grass isn't THAT thick.

I tried loosening and tightening the Mule drive, replaced the belt, laid some wax on the belt as dressing.  None of these solve the problem.

 

Wondering if the source could be something other than the mower drive belt.   The sound does seem to be coming more from the engine area than the deck.  Not from the engine itself but the drive wheel for the belt.

 

Any ideas?   Thanks much

Share this post


Link to post
Share on other sites
 
stevasaurus

Are you thinking that the belt is slipping a little under load??  Welcome to Red Square.  :)

Share this post


Link to post
Share on other sites
 
TunaSlayet

image.thumb.jpeg.42fd16b0f6f34c34ceb90ba7545561f8.jpegI would take a look at the pto clutch adjustment. The pto is right under the exhaust, so this is best to do when the engine is cool to prevent burns. There is a threaded section on the engagement rod, jut give it one turn at a time until the pto lever has a nice snap upon engagement. Have had the same issue, and it is a high pitch squeal from the clutch on the pto slipping. Gluck! (Sorry it's upside down, but u can see the adjustment if you do a handstand)

 

  • Like 5

Share this post


Link to post
Share on other sites
 
stevasaurus

I turned your picture around for you.  :)

  • Like 1

Share this post


Link to post
Share on other sites
 
TunaSlayet

Haha. Thanks you.

Share this post


Link to post
Share on other sites
 
SharonBen

thanks - the adjustment was a little sticky but its a winner.  I appreciate your help!  god bless the internet...

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • CS-17
      By CS-17
      Sold!!!
       
      Used 1966 Wheel Horse 856. Includes Kholer K181 8hp engine and 32" deck. Runs and Drives Great!
        I received it in non working order, I have since done the following repairs:   To Engine/Transmission; New carburetor, fuel pump, fuel line, fuel filter, battery, throttle cable, head bolts, spark plug, regapped points changed oil in engine and transmission and cleaned air filter.   To Body; striped and repainted wheels, blades sharpened and primed hood and rear fenders (ready to be painted).    This mower is ready to add to a collection or used for every day tasks. Cash on pickup. $800 or best offer.   Please feel free to CALL me for details or any question!   THANKS for looking!    
    • DeltaNu1142
      By DeltaNu1142
      I bought a 5xi package yesterday including some attachments I'm not going to need:
      4' plow, model # 79355 - in great condition, very minor surface rust on crossmember and back side of blade. $250 48" mower deck with blower and bagger - in good condition, working when removed from tractor yesterday. Previous owner said it never clogged on him. Some surface rust on deck and one 2" hole near the center. $300.  
      I'm open to offers and interested in trades! I'm looking for a 2-stage snow thrower, p/n 79366. Maybe tools, etc.
       
      Available for pickup--let me know if you have any questions. Thanks!





       
      Here's a photo of the deck that's included. It's got some rust holes, but functions perfectly. Most of the price here is wrapped up in the blower & bagger:
       

    • MSBiker
      By MSBiker
      Well it looks like I'm out of luck. I have been looking for blades for my Lawn Ranger and having zero luck. I have tried Wheel Horse part numbers 7908, 7909. Toro part numbers 8777, and 53322 and no one has anything like this. I was thinking about doing a cut down, but finding right hand and left hand blades seems to be the problem. 
      Anyone making blades, constructing blades, got a work around, etc? My blades are usable, but that is about it. 
    • cbj75
      By cbj75
      I have a 1975 D200 Wheel Horse with front mount dozer blade, package includes Wheel Horse Dump Trailer, 48" belly mower side discharge, Wheel Horse front and rear wheel weights, turning brakes, rear PTO and 3-point to 2" receiver attachment, and Brinley twin disc harrow. Rear luggage/rack carrier, All refurbished, sandblasted and painted Ford red in 2016. Lots of extra Wheel Horse parts included.
       
      Package price $3000.00.
       
      Bryce Johnson
      102 Anglers PT
      Mc Cormick SC 29835
      913-638-6788

      IMG_1962.HEIC IMG_1965.HEIC IMG_0279.HEIC


       
    • jmack
      By jmack
      What’s the correct v-belt size for a xi drive belt connecting to a 60” deck?  
       
      Just shredded mine today. 
×
×
  • Create New...