Jump to content
tommyg

Replacement Hydro Cylinder for D Series

By tommyg, in Wheel Horse Tractors

Recommended Posts

tommyg    152

tommyg
Posted

I was wondering if anyone has done any research on a possible replacement for the standard hydraulic cylinder on the D-160, 180 and 200 series. I've got a leak in the seal on mine and while I could probably find a replacement, the potential that it would leak too, is pretty high. Seems to me there ought to be something that would fit out there and would be guaranteed not to leak.

Share this post

Link to post
Share on other sites
 

tommyg    152

tommyg
Posted

So I guess the obvious answer to this question is a "no".

Share this post

Link to post
Share on other sites
 

Spareparts    84

Spareparts
Posted

Baileynet.com, can make you any cylinder you want, they have made me several specialty cylinders in the past.

Share this post

Link to post
Share on other sites
 

tommyg    152

tommyg
Posted
22 hours ago, Spareparts said:

Baileynet.com, can make you any cylinder you want, they have made me several specialty cylinders in the past.

 

Thanks! I'll check it out.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • Southern_Secret
      IT'S a D-180 & IT'S all MINE!!
      By Southern_Secret
      Hello fellow Horse Heads long time no post for me, life gets crazy & a lot of things change sometimes but anyhoo. So back a few years ago when I first got my 1994 314-H I had it at my shop going threw it. One of my customers walk past as im working and said, you know I think Iv got a Wheel Horse & im thinking "no you dont buddy". I give him my # to send pics thinking it was a big waste of time & after getting the pics I realized he did have a Wheel Horse! I hand shake bought it right there, asked him to bring it to my store & he said no problem. Well after almost 2 years it is finally in my orbit. I know very little about it other than his father-inlaw got it new and used it around his house moving snow and stuff. His father inlaw moved down south here when his daughter got married and gave the tractor to my customer because he had a farm & his the inlaw had no use for it anymore. Same with every barn find, "it was running when parked" 8 years ago, said one of the axel seal is leaking. Im happy and hope I can get it back in running order soon cause it is going to be handy around the truck farm!!
       
      I will post Pics as soon as I reinstate my membership





    • Swemill
      My D-180, with mods...
      By Swemill
      Hi everyone!
      Long time since i was here and my old pics is gone from the forum.
      I just uploaded a movie with pics on youtube, and thought i could share it for you guys.
      I would love to get some comments on my Youtube channel, from you true Wheel Horse fans! 
       
      Thanks and Best Regards  
       
       
    • 87buickt
      D200 Attachments
      By 87buickt
      Listing for a friend, late 70s I believe D200 deck and plow. Been sitting for a while, make reasonable offer, friend also has tons of literature he may part with, if Interested let me know

    • Nathan W
      D 160 end loader.
      By Nathan W
      Does this look factory for 1976 


    • wh315-8
      50” D series Tiller Top Lift Link measurement
      By wh315-8
      Anyone be able to measure out the Top Link Bar for the 50” D Series Tiller?
      Just finished rebuilding a tiller, have a adjustable type but would like to put a original type on like the manual has listed.



×
×
  • Create New...