Jump to content
Sign in to follow this  
Followers 0
rockbuilt

Stuck

By rockbuilt, in Transmissions and transaxles

Recommended Posts

rockbuilt    7

rockbuilt
Posted

The good news is I just acquired a 520H the bad news is the trans seems to be stuck it's disengaged (it will roll free forward and reverse) but the linkage arm on the top is stuck it won't move in either direction I don't want to force it.. any help would be greatly appreciated 

Share this post

Link to post
Share on other sites
 

rmaynard    14,898

rmaynard
Posted

Where is the motion control lever stuck? Does it appear to be in neutral? If you can start it, the linkage must be in the neutral position in order to activate the neutral safety switch. With the engine off, I would start by disconnecting the linkage from the cam plate under the seat and see if you can move the speed control arm. Then try moving the rest of the linkage until you find where it is binding.

  • Like 1

Share this post

Link to post
Share on other sites
 

squonk    38,935

squonk
Posted

The cam on top of the trans pump gets lots of wear and digs into the cam plate. Check there.

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Similar Content

    • Duramax7man7
      1993 Wheel Horse 312-8, 520h Forward Swept Axle & 42 Deck
      By Duramax7man7
      Very Solid tractor! Starts right up and Runs and Cuts like a Champ! 

      ONLY 419hrs

      FEATURES:
      Newer Agro Tires on Rear & Solid Front Turf Tires.
      Wheel Weights on rear.
      Fully Swapped Forward Swept axle and Steering off of 520h.
      New Tractor Supply Adjustable Seat.
      Exhaust Fully Restored. (Sandblasted, Outgassed and 2000deg High Temp Satin Exhaust Paint Coated.)

       I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      Asking >>>>> $1,099 OBO <<<<<<< 

      (248) 943-8634 Text or Call.  God Bless. 




    • Duramax7man7
      $1,175 OBO [419 hrs] 93 312-8 w/ 520h FS Axle + 42" Deck
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • jmack
      D-180 Transmission Dipstick
      By jmack
      I’m looking for a transmission dipstick to a D-180. Let me know if you see one. 
    • Doug B
      GT14
      By Doug B
      Hey guys,I have a dilemma I need some help with. I have a 1969 GT 14 that I replaced the transmission and pump on. For about 2 weeks afterward everything worked great, but while mowing at a pretty good pace I noticed a shudder and the tractor slowed a little but not bad. The more I rode it the slower it got until it barely moves. What stumps me is the hydraulics are still very strong,as in I can back the 3 point under the bumper of my truck and if you lift the arms all the way up the front wheels of the tractor will clear the ground. Have checked the tow valve and checked the internal filter,but no luck. I have also checked and replaced the forward and reverse bypass springs and the lever is moving the cam to full travel, forward and reverse. Any help would be appreciated.
    • robertsonchris06@gmail.co
      8-25 Riding mower belts
      By robertsonchris06@gmail.co
      After using my 8-25 mower successfully for several years I noticed the belts were very worn. I replaced the belts and used the mower several mowings this past summer with no problems until as I was mowing the last time the mower would not move in any gear. After stopping and inspecting the traction belt it was almost completely destroyed. Prior to this I had noticed that the engage/disengage lever was getting hard to activate (very stiff). Has anyone had a similar thing happen?
      Thanks in advance for any help on this problem.
      Just want to keep my mower running.
      Chris
×
×
  • Create New...