Jump to content
kcuttuck

Deck belt C121

Recommended Posts

kcuttuck

I am looking for deck belt size for my C121(motor to side discharge deck) so I can go to TSC and buy one. So I am looking for the inches. 

 

Thanks

Share this post


Link to post
Share on other sites
 
daveoman1966

What size deck do you run or what is the model # of it?  ...  36, 42, or 48" wide.  That determines what belt is needed.  Whatever the length, I would URGE you to  NOT buy an after-market belt.  It will NOT fit right and result in premature failure.  Once you determine what size deck you have, call a Toro dealer for the correct belt.  The OEM belt is a few bux more, but well worth the money.   

  • Like 2

Share this post


Link to post
Share on other sites
 
kcuttuck

It had a 42" deck and I put a 48" on there. The 42" rotted out. The 48" deck is from the 1980s. It has worked great. The drive belt for the deck has warn and has rolled over.

Share this post


Link to post
Share on other sites
 
daveoman1966

That is EXACTLY why after-market belts are junk....they don't PRECISELY fit the geometry of the V pulley and they begin to twist because of that.  Under tension, the twist will result in roll-over, expectially when you try to get more tension to keep the belt from 'slipping'. 

Buy the OEM belt....and be done with it.  I think the belt # is 102742. 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • GeoC-120
      By GeoC-120
      The time has come for me to part with my trusty Wheel Horse and find it a new home. I am the second owner (since 2003) and it has always been stored in a garage.
      I am located about 2.5 hours Northeast and 140 miles from the Big Show for those who are attending.
       
      1975 C-120 Special, 8-speed (Model 1-0375). Strong running( no smoke) Tecumseh HH-120 (rebuilt 1986). Rebuilt carb, new fuel pump, and new ignition module (in 2006). Good used replacement tank, original tank is included in the sale.  Brand-new battery, fuel filter, and shutoff valve installed 5/26. The transaxle case is cracked near the center flange and repaired with JB Weld.
      Solid 42” side discharge deck  (Model 5-1010) bearings replaced in 2005. Extra set of Gator mulching blades and spare hi-lift blades included.
      42” snow/dozer blade (Model 86-42bc010),  Rear weights with tire chains and hardware.
      Parts: 4 NOS belts and 2 good used belts, NOS taillight lenses, used starter, used ignition module, more (see pic).
      1975 C Series Owner’s manual, 1975 WH accessory catalog, 5-1010 deck manual, original HH-120 manual, updated Tecumseh HH-120 technicians handbook.
       
      Selling entire package for $345.
      Please PM to contact

      HH120_running.mp4











    • DeltaNu1142
      By DeltaNu1142
      I bought a 5xi package yesterday including some attachments I'm not going to need:
      4' plow, model # 79355 - in great condition, very minor surface rust on crossmember and back side of blade. $250 48" mower deck with blower and bagger - in good condition, working when removed from tractor yesterday. Previous owner said it never clogged on him. Some surface rust on deck and one 2" hole near the center. $300.  
      I'm open to offers and interested in trades! I'm looking for a 2-stage snow thrower, p/n 79366. Maybe tools, etc.
       
      Available for pickup--let me know if you have any questions. Thanks!





       
      Here's a photo of the deck that's included. It's got some rust holes, but functions perfectly. Most of the price here is wrapped up in the blower & bagger:
       

    • morePEdal
      By morePEdal
      *16 HP Onan Engine, 665.4 Hours
      *8 Speed Transmission
      *48” Snow Plow- Works Great! Set up and READY TO GO BEFORE THE SNOW!
      *Nice 42” Mowing Deck, no rot or welds, smooth spindles
      *OEM Wheel Weights, 50 lbs. Each
      *Chains
      *Valves adjusted this summer, runs great!
      *Good battery
      *Tires All Hold Air
      *LED lights all the way around
      *Manuals included
      Bought a Honda tractor with 4WD and 4WS with deck, plow and snowblower so I don’t need this tractor.
      Cash Only!
      *WILL NOT RESPOND TO “IS THIS STILL AVAILABLE?”
      *COMING SOON:  Also selling a Wheel Horse 520H with a 2-Stage Snowblower. Check out that listing if you want a snowblower garden tractor!
       

    • CS-17
      By CS-17
      Sold!!!
       
      Used 1966 Wheel Horse 856. Includes Kholer K181 8hp engine and 32" deck. Runs and Drives Great!
        I received it in non working order, I have since done the following repairs:   To Engine/Transmission; New carburetor, fuel pump, fuel line, fuel filter, battery, throttle cable, head bolts, spark plug, regapped points changed oil in engine and transmission and cleaned air filter.   To Body; striped and repainted wheels, blades sharpened and primed hood and rear fenders (ready to be painted).    This mower is ready to add to a collection or used for every day tasks. Cash on pickup. $800 or best offer.   Please feel free to CALL me for details or any question!   THANKS for looking!    
    • cJ_3D
      By cJ_3D
      Hello helpful Wheel Horse enthusiasts! 
       
      Maybe you all could help me figure something out. I don't think I am installing the mower deck properly on my 1989 252-H and I don't know if the PTO clutch is adjusted right.
       
      So referencing this image here from the service manual for the mower deck (37"):
       

       
      What exactly am I doing with this adjustment knob and how does it fit into this piece?
       



       
      Also for the PTO clutch where am I sticking the feeler gauge exactly and do I need to do all 3 springs? Or does adjusting the one in the manual adjust all three?
       


       
      Much obliged for the help!
       
      CJ
×
×
  • Create New...