Jump to content
Sign in to follow this  
wheelhorsekid

Where Can I Buy Parts, Tires Etc.

Recommended Posts

wheelhorsekid

Hey All!

I just got a C101, my first WH since I was a kid. I'm looking online for parts and tires and cannot find any good sources. Does anyone have a "go to" place for parts? Thanks for any help.

Share this post


Link to post
Share on other sites
 
nylyon

At the top of this forum you should see a "pinned" post full of useful links. :WRS:

Share this post


Link to post
Share on other sites
 
Kelly

Post a ad in the classifieds, or I sell lots of parts what are you looking for? I just parted out 3 C-101's for new tires try Miller tire.

Share this post


Link to post
Share on other sites
 
wheelhorsekid

Post a ad in the classifieds, or I sell lots of parts what are you looking for? I just parted out 3 C-101's for new tires try Miller tire.

Immediatly I need a muffler.

Share this post


Link to post
Share on other sites
 
wheelhorsekid

At the top of this forum you should see a "pinned" post full of useful links. :WRS:

I'm sorry -- what do you mean by "pinned" post. I don't see anything. I'm new to this forum. Thanks

Share this post


Link to post
Share on other sites
 
can whlvr

if you look at the page when you go into wheelhorse tractors at the top pof the list of posts you will see 4 posts that have pinned in front of them

Share this post


Link to post
Share on other sites
 
Doubletrouble

:WRS: Glad ya found us!

Share this post


Link to post
Share on other sites
 
DoctorHfuhruhurr
www.tires-easy.com has the lowest prices I've been able to find on tires but I always check around everywhere before purchasing since pricing is constantly changing.

Share this post


Link to post
Share on other sites
 
Zeek

www.tires-easy.com has the lowest prices I've been able to find on tires but I always check around everywhere before purchasing since pricing is constantly changing.

I was just getting ready to buy six tires, thanks for this post Doc :twocents-twocents:

Share this post


Link to post
Share on other sites
 
dobeleo

I was checking around at different sites for Carlisle tires for my 312-A and I found the cheapest price was at Farm & Fleet when they were on sale. The only problem was I probably spent another $50 while I was there.

Funny story, my wife and I were at Farm & Fleet and picked up tires for my 312-A. Months later we went back and I told her I need tires for my small Deere rider (RX-73). She got made at me because the Wheel Horse wasnt running yet and I needed to get tires for it first!

100_0356-1.jpg

Dan

Shorewood, IL

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • Mitchellnh
      By Mitchellnh
      Wheel Horse parts collection. Many new-old stock and used parts for many models. Please make an appointment to view. No trades.
       
      There's a lot of parts for D-160 and the C series. This is a collection left behind by my Father, so I'm really not sure what part is what here. There's even a D-160 Tractor under a tarp in the backyard with a three point hitch. Hasn't run in a decade. I'll throw that in if you meet my price. 
       
      Willing to sell entire lot for $1850 obo
       
      Mitchellocastiglione2@gmail.com 
       




    • Jon Paulsen
      By Jon Paulsen
      Inexpensive - Carlisle X Trac ATV Bias Tire - 16x6.50-8 Good quality (I expect) Should look nice with my large rear aggies  
      I don't know how much these have been discounted, but I expect anything you find like this from a good brand will be 2X to 3X the price. $45 each at Amazon. This tire is discontinued. 
       
      Rough measurement seems they are about 16" tall and the lugs are about 1/2" deep. 



    • PWL216
      By PWL216
      Are there aftermarket front rims available for C Series tractors? I have a 120 and a 160 that need front rims… thx.
    • blu_stang
      By blu_stang
      Hi All, It's time for me to sell the D-250 I've had for the last 8 years.  It’s useable as is, or would be a great project bundle for further restoration.
       
      I am selling a large package: the running tractor, a refurbished snowblower (48”), parts snowblower, mower deck (60”), tiller (40”), front plow blade (60”), Cat 0 3-Point Hitch with adjustable top link, WH 3-Point tool bar, wheel weights and tire chains.  Also included is an extensive part collection, nearly a second tractor worth.  I will include the original manuals, an original 1976 sales brochure, and repair manuals for the tractor and the engine.  I made electronic copes of all of the above, and stored the paper copies to prevent further wear. This is one of the most complete D-250 tractor/attachment bundles I’ve seen.
       
      Some highlights from the available parts: Frame rails, extra engine, water pump, extra transaxle, extra gears, including worm gears (stored in oil bath), Front wheel set, carburetor, carb rebuild kit, rebuildable original radiator, extra radiator overflow bottle, rebuilt alternator, new voltage regulator (I was planning to change over to an alternator setup from the generator), new in package Renault engine seals, new PTO seals, ignition maintenance parts.  There are also many panels, frame pieces, cables, levers, tubes (lines) and hardware in the collection.
       
      The tractor engine runs smooth.  There are around 1050 original hours on it; It’s a 1976 edition.  Everything works, except the dash lights and the rear lights (disconnected b/c of fender).  I just haven't sorted out the wiring, but it is all there.  Headlights are good and working, as are all of the gears and levers.  The four tires are nearly new Carlisle Multi Trac, with nubs still on them.  The rear tires have been filled (ballasted) with Rim Guard for extra traction.  The hydraulic pump, front PTO clutch and brakes operate but could use a tune up.  I’ve used it for mowing and snowblowing on hills, driveway and around my land. I don’t have an original WH seat.  The snowblower was rebuilt a few years back, and assembled with all new hardware and bearings.  The mower deck gearbox was professionally serviced recently, and has a new set of blades with only a half dozen mows.  The rear fender needs a repair, but all pieces are available.  The plow and tiller are due for restoration.  The Points, Condenser and rotor have all been replaced and tuned in.  The battery is good.  I've rebuilt the carb, replaced the fuel pump and changed out the plugs within the last 30 hours.  The replacement radiator is from a Kawasaki engine; it was installed with new hoses. There are also new custom hydraulic hoses and a new hydraulic lift cylinder.
       
      Here's a video of me mowing, this past summer.
       
      Transporting this haul in one trip will require a pickup truck and a large trailer.  









    • Merl
      By Merl
      Newbie here and I have a 520-H that runs, but needs some TLC and some minor things fixed and/or adjusted. It comes with a like new tiller that I believe has only been used once and has paint still on the tines. I am the 2nd owner and I have personally never used the tiller. I am selling my previous home that I rent and where it has been stored. My current home's yard just isn't big enough to use a rider and I need to find a new home for it. I want to sell them together to simplify and I need them gone in the next 2 weeks. Please reach out with any questions and I'll do my best to answer. I am definitely not as knowledgeable as most of you on this forum, but figured somebody would like to fix it up, part it out and/or needs a tiller. Please email or text.





×
×
  • Create New...