JCM 11,312 #1 Posted July 31 Making good progress on the 420. A LOT of hours into it at this point removing the paint on the sheet metal. If WH had used primer it may have come off a little easier ? on this series tractors.Letting things set up before reassembly. Hoping to have it somewhat ready for the September Meet & Greet. Those chrome mylar decals take some patience to remove.Some before and after pics. 3 17 Share this post Link to post Share on other sites
Pullstart 70,893 #2 Posted July 31 Awesome stuff! Plunge why don’t we have these parts to strip in an e-tank? That’s the cat’s meow for pulling parts of any sort down to bare metal. Share this post Link to post Share on other sites
JCM 11,312 #3 Posted July 31 4 minutes ago, Pullstart said: Awesome stuff! Plunge why don’t we have these parts to strip in an e-tank? That’s the cat’s meow for pulling parts of any sort down to bare metal. No more room for anything around here. I have a bit of hoarding tendencies.. Need any Plumbing material or tools ? That sounds like a GREAT idea but I am not sure if this will be my last restoration ?????? Most likely. Thanks for the tip Kev 2 Share this post Link to post Share on other sites
Sodaking27 1,296 #4 Posted July 31 @JCM Looking great so far. Maybe your project will convince me to get back working on my 420. Still kinda bummed about not being able to get the decals in the chrome. Looking forward to seeing your progress.👀 1 1 Share this post Link to post Share on other sites
ebinmaine 79,800 #5 Posted July 31 Lookin good Jim!! 1 Share this post Link to post Share on other sites
JCM 11,312 #6 Posted July 31 3 hours ago, Sodaking27 said: @JCM Looking great so far. Maybe your project will convince me to get back working on my 420. Still kinda bummed about not being able to get the decals in the chrome. Looking forward to seeing your progress.👀 PM sent 1 Share this post Link to post Share on other sites
Retired Wrencher 6,836 #7 Posted August 1 Very nice so far Jim. Keep going. 1 Share this post Link to post Share on other sites
8ntruck 9,106 #8 Posted August 1 On 7/31/2026 at 7:46 AM, JCM said: No more room for anything around here. I have a bit of hoarding tendencies.. Need any Plumbing material or tools ? That sounds like a GREAT idea but I am not sure if this will be my last restoration ?????? Most likely. Thanks for the tip Kev Good looking work. Do I need plumbing material? Nope. I've got a box of plumbing stuff that does not fit anywhere or anything in the house. 1 1 Share this post Link to post Share on other sites
Brockport Bill 2,439 #9 Posted August 1 panels and footrests and dash all look amazing! However, I must have missed it in the thread - - how are you cleaning down to bare metal? Bill 1 Share this post Link to post Share on other sites
JCM 11,312 #10 Posted August 1 I'm a glutton for punishment. Born and brought up learning to do everything the hard way. @Brockport Bill No kidding. The pictures should show you. Kleen Strip Aircraft paint remover, 1 1/2'' and 3'' wire wheels on an 18 volt Milwaukee cordless, lots of different grades of sandpaper etc etc and a right shoulder that's just about had it. Not perfect but doing the best I can with what I have. Thank you for the nice comment I'm enjoying bringing this 420 back to action, feels good. 1 2 Share this post Link to post Share on other sites
Bill D 3,015 #11 Posted August 2 So glad to see it getting the treatment it deserves. Keep up the great work. 1 1 Share this post Link to post Share on other sites
JCM 11,312 #12 Posted 16 hours ago Time for an update. Getting to the point of installing the painted parts as the humidity is not the best for outdoor priming and painting. 6 Share this post Link to post Share on other sites
ebinmaine 79,800 #13 Posted 2 hours ago Good work there sir. 1 Share this post Link to post Share on other sites
