Wooden truck bed build thoughts

[ebinmaine 79,086]

@squonk and @SylvanLakeWH

 

Imagine if I ever got BOTH done. 

 

 

[SylvanLakeWH 31,505]

8 minutes ago, ebinmaine said:

@squonk and @SylvanLakeWH

 

Imagine if I ever got BOTH done. 

 

 

[squonk 46,791]

39 minutes ago, ebinmaine said:

@squonk and @SylvanLakeWH

 

Imagine if I ever got BOTH done. 

 

 

[Beap52 2,289]

My father-in-law had a '69 GMC pickup that he put a hoist under the bed.  That was the handiest pickup I ever borrowed--actually he gave it to me to use to use as a young builder.  Firewood, little jag of gravel even junk was a piece of cake unloading.  

 

If you put a hoist under the new bed, you'll have lots and lots of friends!

 

Just sayin'

Edited 15 hours ago by Beap52
clarification

[ebinmaine 79,086]

2 minutes ago, Beap52 said:

My father-in-law had a '69 GMC pickup that he put a hoist under.  That was the handiest pickup I ever used.  Firewood, little jag of gravel even junk was a piece of cake unloading.  

 

If you put a hoist under the new bed, you'll have lots and lots of friends!

 

Just sayin'

 

I've considered that many times.  If the right parts showed up for next to nothing, I'd install a lift/dump/hoist.  

 

[953 nut 66,446]

22 hours ago, Handy Don said:

I can heartily appreciate the “stake” sides becoming ramps although the transition from a straight ramp onto the flatbed can challenge the clearance of a tractor with an under-hung implement, e.g. a grader or mower deck.

                If the truck bed was converted to a dump bed or a beaver tail bed that problem could be minimized.

[adsm08 4,527]

22 hours ago, Pullstart said:

Norman will be hauling his deck here in a couple weeks 

 

Where you goin'?

[Pullstart 70,056]

3 minutes ago, adsm08 said:

 

Where you goin'?

This honky tonky field in Biglerville, PA… 

[adsm08 4,527]

3 minutes ago, Pullstart said:

This honky tonky field in Biglerville, PA… 

 

Going to the apple festival, eh?

[dodge78 100]

3 hours ago, ebinmaine said:

 

I've considered that many times.  If the right parts showed up for next to nothing, I'd install a lift/dump/hoist.  

 

The hoist under my 91 was made of snow plow parts

[ebinmaine 79,086]

Some excellent comments above. Thank you everyone. I'm posting a link here mostly for my own reference but obviously you're welcome to peruse it. It's a design for a bed made for a very heavy truck camper.

 

 

https://www.truckcamperadventure.com/truck-mod-diy-wood-flatbed-deck-for-truck-campers/

 

 

 

 

[JCM 11,160]

Drove the K- 20 locally for years while I worked on the rest of the truck. Got a lot of comments without the bed. POR on the frame etc. Have fun with it while working on it. GOOD LUCK with it EB.