2026 Big Show Buy/Sell/Trade Thread

[Pullstart 69,805]

I have some left over shirts from plow day.  
 

4 size XL, 5 size L at the moment.

 

$20 each.

 

 

[squonk 46,173]

Compression release style  cam and governor  out of a K181. Everything you see in this pic. $50

 

 

 

[p38js 443]

I’m looking for a bagger vac system for a 42 or 48 inch deck and a hood for a lawn ranger

[Handy Don 16,307]

Looking for a pair of BF Goodrich “All Purpose” 6-12 rear tires for my 854 (or their Firestone equivalents). These’ll be workers so they must have some years of life left in them.

Not interested in Ags. (These have lots of tread but age-hardening and dry rot are closing in.)

 

[702854boy 650]

@Handy Don If those are still in usuableish condition would you want to trade a set of Generals for them? We have a set of good condition Generals that were on my 854 when we got it but I kinda like the looks of the Silverton's more

Edited Tuesday at 01:14 AM by 702854boy

[squonk 46,173]

    General Garden Tractor S.S. I have them on my 857

 

[Sparky-(Admin) 25,061]

  Willing to bring this solid 36” rear discharge deck WITH the mule drive and belt to the show for $50. 
  Mows really well! The picture of the two mowed stripes was made today with it. But the spindles are not quiet, that’s why it’s priced low.

  Hang it on your tractor and slap on some ear muffs and you’ll be mowing and smiling .
  Delivered to the Wheel Horse Show for $50.

 

 

 

 

 

 

 

[Sodaking27 1,157]

Looking for a PTO cover like the one pictured below.

 

Edited 5 hours ago by Sodaking27

[rmaynard 17,111]

1 hour ago, Sodaking27 said:

Looking for a PTO cover like the one pictured below.

 

Don, I have one. Do you need it before the show?

[Pullstart 69,805]

Looking out to see if anyone’s got a good mower deck and all the mounting necessities for a 953/1054?  

[Ed Kennell 45,810]

II could bring my NEW 1076.       It starts runs and drives and has an axle bracket.  The tranny has a drip  near the front.   Missing the belt guard and throttle cable. $300

 

42" SD deck with good spindles and all the side drive hardware. and a patched deck shell.     $50

 

42" short frame plow with long down pressure lift l=bar.    Plow is good with a wear bar that us worn and needs turned to the unused side.   $100

 

 All for  $400  delivered to the big show.          It will be for sale at a couple local shows for $500  unless a member is interested.   

 

The tiller is not for sale.

 

 

 

 

 

[Ed Kennell 45,810]

7 minutes ago, Pullstart said:

Looking out to see if anyone’s got a good mower deck and all the mounting necessities for a 953/1054?  

Not sure if my patched deck off the 1076 will fit a 953?

[Pullstart 69,805]

14 minutes ago, Ed Kennell said:

Not sure if my patched deck off the 1076 will fit a 953?

me neither, but I’ll look into it.  No need to hold anything, it’s not pressing 

[Sodaking27 1,157]

1 hour ago, rmaynard said:

Don, I have one. Do you need it before the show?

Bob, No I’m in no rush. I’ll see you Thursday at the show.

Thanks..

[953 nut 65,370]

2 hours ago, Ed Kennell said:

Not sure if my patched deck off the 1076 will fit a 953?

It will if you add an old style mid Tach A Matic that has the pre-mule drive belt set up to the 953 as I did on "Hot Wheels" that @Pullstart already owns, just need to mount the plates on the inside to make up for the frame width or he could mount a new type mule drive to the front of the 953. I suspect @Ed Kennell has the parts and pieces needed either way.

 

[rmaynard 17,111]

2 hours ago, Sodaking27 said:

Bob, No I’m in no rush. I’ll see you Thursday at the show.

Thanks..

Roger that