Replacement Drive Belt for 1975 WH C-100

[953 nut 69,452]

There are a lot of internet sellers who sell Piece of Sc**t belts that will not work because they are over 5/8" wide or not the advertised length. Go to Tractor supply and buy an  82 in  X  5/8 in Kevlar belt, put ir on and enjoy the ride.

If you plan to be around here please do an introduction so we can find out more about your Wheel Horses.   https://www.wheelhorseforum.com/forum/47-introductions/

[peter lena 10,074]

@953 nut      the belt fraying on that ?  thats your leader  to COLLECTIVE  MOVEMENT  POINTS !  idler  pulleys are  known for lubrication failure , incremental hang ups , causing  belt  bounce . also all  linkage , should move SEAMLESSLY , in motion HAND OFF  ,  done a lot of that  , makes a world of difference ,  PULLEYS ARE REGULARLY ROUGH IN MOVEMENT , thats what  starts the belt bounce . lubricate / verify every stage , pete   

[953 nut 69,452]

@peter lena, this thread is a year old, don't know what belt he bought.