Rock shaft removal help needed.

[ebinmaine 70,950]

1 minute ago, wallfish said:

You can get a small, one time use replaceable tank type of kit. 

https://www.bernzomatic.com/Products/Hand-Torches/Manual-Ignition/Brazing-Torch-Kit-WK5500OX

 

 

I've had those tanks. Just don't have any left......

 

 

1 minute ago, wallfish said:

 

Doesn't cost anything to get a Federal tax ID and it's done online. Why would you have to claim income if you don't have any coming in? Or do you?

 

 

None coming in currently. No.

Massachusetts is a high taxing State as you well know. Maine is not at all far behind.

They are so stickly up here that if you purchase anything in New Hampshire where they don't have a sales tax, you're supposed to declare it as a "Use Tax" on your income taxes for the State of Maine so they don't lose any of their own State Sales Taxes.

 

I carry a Commercial Driver's License and a nationally recognized crane license along with forklift certifications for two states. What I do not need is any source of tax trouble having any effect on those.

 

If I was to get a business license. No problem. If I was to use it to get materials. No problem.

Not showing any income is obviously not technically illegal, however, that would absolutely be potential red flag for a state level audit. Even the questioning of that occasion is absolutely not worth me doing certain things.

 

 

[Wayne0 967]

2 hours ago, ebinmaine said:

 

 

I love the idea of having a torch set but I can't get the tanks filled here unless I'm a commercial customer.  

Open an account with Maineoxy. Easy peesy.

If you buy their tank, and refill it there, you'll never have to have it re-certified.

I did that with Arcsource. Works out great for my MIG tank too.

Edited Sunday at 01:39 PM by Wayne0

[squonk 42,723]

Give the rockshaft to @wallfish. He can bring it to the show ( If there's room in the van) Then he can give it to @Pullstart. Then he can hook 2 tractors to it and try to pull it apart. Should be some fine entertainment! 

[Horse Newbie 7,219]

Borrow what you need and throw the owner a little scratch for the gas and rent…

beats going to prison…

[SylvanLakeWH 27,658]

54 minutes ago, ebinmaine said:

 

I've had those tanks. Just don't have any left......

 

 

 

None coming in currently. No.

Massachusetts is a high taxing State as you well know. Maine is not at all far behind.

They are so stickly up here that if you purchase anything in New Hampshire where they don't have a sales tax, you're supposed to declare it as a "Use Tax" on your income taxes for the State of Maine so they don't lose any of their own State Sales Taxes.

 

I carry a Commercial Driver's License and a nationally recognized crane license along with forklift certifications for two states. What I do not need is any source of tax trouble having any effect on those.

 

If I was to get a business license. No problem. If I was to use it to get materials. No problem.

Not showing any income is obviously not technically illegal, however, that would absolutely be potential red flag for a state level audit. Even the questioning of that occasion is absolutely not worth me doing certain things.

 

 

In Michigan, if you have a "business " you're filing taxes and annual reports regardless if you make a penny.

 

Small businesses nationwide just dodged a huge bullet when the Feds discontinued enforcement of the Corporate Transparency Act Beneficial Ownership Information Reporting requirements...

 

Just FYI...

[Pullstart 64,791]

Thanks for the tag @squonk!  EB if you can get this out, try TWISTING the two parts.  Pipe wrenches and heat.    your quench can even be an old candle or paraffin wax.  It’ll flow into the parts and lube them as well… but not burn off like liquid mediums.

[wallfish 17,573]

57 minutes ago, ebinmaine said:

Not showing any income is obviously not technically illegal, however, that would absolutely be potential red flag for a state level audit. Even the questioning of that occasion is absolutely not worth me doing certain things.

It's not as complicated or scary as people might think it is but this seems a waste of time discussing it anyway.

How about, Are you interested in a 16 HP OHV Teccy engine for one of your C-160s? One just came with a project of which I have zero use for. Condition unknown as of now

[Lee1977 7,052]

31 minutes ago, Pullstart said:

Thanks for the tag @squonk!  EB if you can get this out, try TWISTING the two parts.  Pipe wrenches and heat.    your quench can even be an old candle or paraffin wax.  It’ll flow into the parts and lube them as well… but not burn off like liquid mediums.

It's keyed don't think it's going to twist. Being an auto you should be able to get it into a hydraulic press. Should be able to find one near by.

Edited Sunday at 02:54 PM by Lee1977

[Pullstart 64,791]

26 minutes ago, Lee1977 said:

It's keyed don't think it's going to twist. Being an auto you should be able to get it into a hydraulic press. Should be able to find one near by.

Oh I see.  My old school ones have pins in them.

[ebinmaine 70,950]

1 hour ago, Wayne0 said:

Open an account with Maineoxy. Easy peesy.

If you buy their tank, and refill it there, you'll never have to have it re-certified.

I did that with Arcsource. Works out great for my MIG tank too.

 

GETTING set up. Easy peasy. 

 

JUSTIFYING it....  not so much.  

 

And the cost..... ???

It's disturbing.  I was quoted a MINIMUM $400 to $600  to get a setup. Forget filling the tanks and filing taxes.  

Absolute. No thanks.  

 

 

[ebinmaine 70,950]

1 hour ago, squonk said:

Give the rockshaft to @wallfish. He can bring it to the show ( If there's room in the van) Then he can give it to @Pullstart. Then he can hook 2 tractors to it and try to pull it apart. Should be some fine entertainment! 

 

 

This is the way.  

[wallfish 17,573]

6 minutes ago, ebinmaine said:

 

 

This is the way.  

I'm in, but only if I can drive one of the tractors to pull it apart

[953 nut 58,186]

1 hour ago, squonk said:

Give the rockshaft to @wallfish. He can bring it to the show ( If there's room in the van) Then he can give it to @Pullstart. Then he can hook 2 tractors to it and try to pull it apart. Should be some fine entertainment! 

Once it is hooked up and the tractors are digging in someone can begin heating the rock-shaft. We can all buy chances on how long it will take before the chains break while the brown-welded pieces are still firmly joined.

1 hour ago, Pullstart said:

 your quench can even be an old candle or paraffin wax.  It’ll flow into the parts and lube them as well

But do this outdoors, the paraffin puts off a lot of smoke. 

[Wayne0 967]

7 hours ago, ebinmaine said:

 

GETTING set up. Easy peasy. 

 

JUSTIFYING it....  not so much.  

 

And the cost..... ???

It's disturbing.  I was quoted a MINIMUM $400 to $600  to get a setup. Forget filling the tanks and filing taxes.  

Absolute. No thanks.  

 

 

I wasn't aware they won't let you set up a personal account.

I have a personal account with Arcsource. No taxes, book keeping etc.

WTF is with Maine anyway!

My friend worked at the shipyard in Kittery and had to claim his wife's wages as a teacher in MA.on the Maine form.

They lived in MA.! Very convoluted situation.

Edited Sunday at 10:26 PM by Wayne0

[kpinnc 13,860]

2 hours ago, ebinmaine said:

This is the way.  

 

 

[Handy Don 13,381]

4 hours ago, SylvanLakeWH said:

In Michigan, if you have a "business " you're filing taxes and annual reports regardless if you make a penny.

 

Same in NY. And, similar to @ebinmaine's point, don’t try to skip a year as it’ll cause an audit for you and probably any person or business filing with your address. 

States have gotten very good at tracking down sales and income taxes they believe are owed.

 

This actually started when states realized that professional athletes from visiting teams were earning serious previously-untaxed coin in their state and/or city and the realization spread quickly. While in charge of payroll software for a large consulting company, I had to build code so that those who traveled could record where they had spent the preponderance of each working day so we could correctly compute the taxes. One oh-so-smart consultant challenged me with “How are they gonna find out if we don’t report it?”.  “Easy”, I replied, “They subpoena everyone’s expense reports and see that the flights, hotels, and meal locations indicate tax liability. Then they tax you and fine you and then they fine the company. And then, probably, I get fired.” “Oh”. he replied.  

Edited Sunday at 06:18 PM by Handy Don

[squonk 42,723]

When I had my auto AC business I did no work 2 qtrs. of every year. So I filed 0 income. Had a local tax pro do my year end filing. Easy. 

[wallfish 17,573]

9 hours ago, ebinmaine said:

I was quoted a MINIMUM $400 to $600  to get a setup

By someone ripping you off to do it for you. The fee in ME for filing a new LLC is only $175 so the rest of that was for a nice deposit into their business account! It's something you can do yourself and DOES NOT require a lawyer or any other so called "professional".

There are or could be some advantages to forming an LLC depending upon what you're doing or trying to do. If you can bring in $10K a year from a side hustle, I'd recommend doing it. LLC is for Limited Liability Company which is protection of personal assets for liability purposes, should something go wrong. For example: the buyer of a tractor runs over and kills his kid because he's stupid, but then blames you because a safety switch was removed from it and now wants to sue you.

https://www.maine.gov/sos/corporations-commissions/corporations/forming-an-entity/limited-liability-companies

 

 

 

 

[ebinmaine 70,950]

22 minutes ago, wallfish said:

By someone ripping you off to do it for you. The fee in ME for filing a new LLC is only $175 so the rest of that was for a nice deposit into their business account! It's something you can do yourself and DOES NOT require a lawyer or any other so called "professional".

There are or could be some advantages to forming an LLC depending upon what you're doing or trying to do. If you can bring in $10K a year from a side hustle, I'd recommend doing it. LLC is for Limited Liability Company which is protection of personal assets for liability purposes, should something go wrong. For example: the buyer of a tractor runs over and kills his kid because he's stupid, but then blames you because a safety switch was removed from it and now wants to sue you.

https://www.maine.gov/sos/corporations-commissions/corporations/forming-an-entity/limited-liability-companies

 

 

 

 

 

 

Oh no no. 

That was to get the torch and tanks.  

 

 

[wallfish 17,573]

16 minutes ago, ebinmaine said:

 

 

Oh no no. 

That was to get the torch and tanks.  

 

 

LOL I know!   I was just adding the info because the subject came about when we went off the rails. 

[ebinmaine 70,950]

7 hours ago, wallfish said:

we went off the rails

 

 

Us ??!!??

 

 

Wow

 

 

 

Hard to believe.....

 

 

[Retired Wrencher 5,658]

23 hours ago, gwest_ca said:

Have you noticed the Mapp gas has been replaced by Mappro which is a Mapp/propane mixture. Not as hot either.

Thanks Garry for that info. Glade I bought a few Moore when I did.

[ebinmaine 70,950]

 

 

And now back to our regularly scheduled programming.  

 

 

I WON!!

 

The rock shaft is out. 

I sprayed penetrating oil in on around it several times over several days. 

This evening I was meandering and pondering and decided to smackify  the right side inward whilst keeping the inner part against the frame. 

 

After about 684 hits it fell out!

 

 

[wallfish 17,573]

1 hour ago, ebinmaine said:

 

I WON!!

The rock shaft is out.

After about 684 hits it fell out!

 

 

Sometimes, the correct tool is actually a BFH

[953 nut 58,186]

12 hours ago, wallfish said:

Sometimes, the correct tool is actually a BFH

And if that doesn't work get a REALY BIG HAMMER.