-
Similar Content
-
By Tim's Toy Tractor
Seat, New! Universal Garden Tractor / Riding Mower Seat
This is a new seat that I purchased for a project tractor and never used, it is in Perfect as New Condition.
I have used this seat on a few Wheel Horse tractors, and they have been a perfect fit and look great.
This is a Universal fitment seat; it has multiple mounting holes and mounting patterns for fitment on most Graden Tractors and Riding Mowers.
$49.00 Call Tim @ 1-313-460-8858 (Local Pick-Up Only, No Shipping)
-
By Tim's Toy Tractor
Two 3 Rib Firestone Tires, 16x6.50-8, 2 of them mounted on OEM Wheel Horse Rims, NEW!
These tires are New, Never Used! Not the cheap China ones, these are High Quality Firestone Tires!
Size: 16x6.50-8
Great for any Garden Tractor or Riding Mower
They are mounted on original Wheel Horse wheels that have been sandblasted & epoxied, and painted with ivory colored paint, note there are a few chips along the inside bead from mounting the tires. The rims will need your specific size wheel bearings installed.
$99.00 Call Tim @ 1-313-460-8858 (Local Pick-Up Only, No Shipping)
-
By DevonianHorse
Hi all, on a 1977 Wheelhorse C-100 (Belgium made), I have a question
My Wheelhorse hood opens really far- it does eventually stop but I don't think it is meant to go this far and that there's a piece missing.
In this photo, there's a hole you can see (near the middle of the pic, 1/3 down) and the same on the other side of the hood mounting part of the frame- I assume some sort of bar is meant to go between them that the hood latches at the base will catch on and this stops the hood dropping further when opened? If this makes no sense sorry- I have simply always assumed that the hood is meant to open at a right angle from the front, but having seen videos, I can see most stop before that.
Does anyone know the part I need, or would two bolts, one on each side, do the job? Mine has never had one, so I am unsure.
Thanks!!
-
By CS-17
Sold!!!
Used 1966 Wheel Horse 856. Includes Kholer K181 8hp engine and 32" deck. Runs and Drives Great!
I received it in non working order, I have since done the following repairs: To Engine/Transmission; New carburetor, fuel pump, fuel line, fuel filter, battery, throttle cable, head bolts, spark plug, regapped points changed oil in engine and transmission and cleaned air filter. To Body; striped and repainted wheels, blades sharpened and primed hood and rear fenders (ready to be painted). This mower is ready to add to a collection or used for every day tasks. Cash on pickup. $800 or best offer. Please feel free to CALL me for details or any question! THANKS for looking! -
By wh315-8
This is a tag on a 1970 Raider 10 from someone on a FB group. Never seen one that had USED on it, it is Model 1-6041 U
Serial 342 USED.
owner thought tag reads 2-6041 U for model but not sure.
I just wonder if this was perhaps a warranty factory return and they used a new id tag this way?
Anyone ever come across something like this?
Typed in the numbers for Clarity.
-