Horse Newbie 6,879 #251 Posted October 23, 2023 36 minutes ago, Lee1977 said: We had a great time yesterday afternoon, we need to do it more often. Yes we do !… I thoroughly enjoyed driving your Toyota truck. Next time we need to drive some tractors.😆 1 Share this post Link to post Share on other sites
ineedanother 1,365 #252 Posted October 23, 2023 Nice work, and I love that truck @Lee1977! I had a '78 (specialty auto after-market 4wd, prior to factory 4wd from Toyota) and wish I still had it. 2 Share this post Link to post Share on other sites
Horse Newbie 6,879 #253 Posted October 23, 2023 (edited) I got an email from ISaveTractors saying my order had shipped. Can’t wait to get the K341 put back together… Edited October 23, 2023 by Horse Newbie 2 1 Share this post Link to post Share on other sites
kpinnc 10,827 #254 Posted October 24, 2023 2 hours ago, Horse Newbie said: Can’t wait to get the K341 put back together… Then you can bring it back and we'll rewire the whole thing! 2 Share this post Link to post Share on other sites
Horse Newbie 6,879 #255 Posted October 25, 2023 So waiting on parts for the K341, but trying to think ahead… I was thinking 16 gauge wire for wiring the 1977 C-160, but I seen 14 gauge wire on the shelve right beside the 16 gauge. Would you guys go ahead and use 14 gauge for a heavier wire and possible better current flow ? UPDATE… Parts for the K341 from ISAVETRACTORS just arrived… Progress to be made ! 1 1 Share this post Link to post Share on other sites
ebinmaine 63,272 #256 Posted October 25, 2023 When I build my own wiring harnesses I use 4 or 6 gauge for the battery cables, minimum 14 on everything else. Ignition switch down to battery is 12 gauge. All FULL COPPER wire. 1 1 Share this post Link to post Share on other sites
Handy Don 10,656 #257 Posted October 25, 2023 31 minutes ago, Horse Newbie said: Would you guys go ahead and use 14 gauge for a heavier wire and possible better current flow ? Feel free, it’s your tractor, but the recommended gauges specified by Kohler and WH are more than adequate. Attention paid to using well-attached connectors, though, will be worth your extra effort. 1 1 Share this post Link to post Share on other sites
kpinnc 10,827 #258 Posted October 25, 2023 1 hour ago, Handy Don said: Attention paid to using well-attached connectors, though, will be worth your extra effort. Agreed. Crimp-on connectors are ok for plugs, but otherwise I prefer to solder and shrink wrap terminal connectors. That way you never have to go back to them. The positive battery cable terminal will corrode just as bad as the battery post, and you can't get to it to clean it once crimped. 3 Share this post Link to post Share on other sites
Treepep 447 #259 Posted October 25, 2023 On 10/22/2023 at 9:12 PM, Horse Newbie said: Today I took a little road trip to @kpinnc’s stables and carried the K341 with me to remove the balance gears. @Lee1977 (Don) dropped by too. The balance gears had a little slop in them but Kevin said they weren’t real bad. I wanted them out regardless. We also cleaned the valve stems up and lapped the valves. When a few gaskets come in that I ordered I will begin putting the K341 back together. First the carb will get a cleaning. Don let me drive his 1980 Hi-Lux 4x4 Toyota Pick Up to Bojangles for some grub and it was a real treat as I had not driven a stick in a long time. It took me back to when I was driving my 1981 Hi-Lux 4x4. Thanks a lot Kevin and Don ! My grandfather (dads dad) would be considered a hoarder I guess however it was all usable mechanical stuff so one could argue differently. He had a collection of toyota and datsun trucks along with a lot of old volkswagons. Sadly when he passed the siblings liquidated most of it. If only I could save just one...Very cool little truck! 1 Share this post Link to post Share on other sites
Horse Newbie 6,879 #260 Posted October 25, 2023 4 hours ago, Handy Don said: the recommended gauges specified by Kohler and WH are more than adequate What is the recommended gauge wire ? Share this post Link to post Share on other sites
Horse Newbie 6,879 #261 Posted October 25, 2023 So today while waiting for the colonoscopy prep medicine to work, I put the K341 oil pan, flywheel, and oil dipstick tube back on. Cleaned the stator before reattaching… Had to make a dipstick tube gasket… I had to drop things and run a few times…😆 1 2 Share this post Link to post Share on other sites
ebinmaine 63,272 #262 Posted October 25, 2023 17 minutes ago, Horse Newbie said: What is the recommended gauge wire ? I believe it is 14 from the factory in the mid 70s. I use a 7 conductor trailer wire for the differing colors. I buy a separate roll of 12 gauge for the ignition switch to battery wire. Definitely agree with the extra attention being put into the ends and heat shrink although I don't solder my harnesses. I use good quality connections and try to be sure all ends are sealed. I've read on boat and plane forums that a soldered connection can be a breaking point for the wire. Particularly if poorly done. I'm not by a long shot halfway decent at soldering so I stick to known skills. 2 Share this post Link to post Share on other sites