414-8 plow wont raise

[Rucan 2]

I left my wheelhorse 414-8 in the garage for a year. Came back and got it started but plow wont raise now. Any ideas?

 

[SylvanLakeWH 28,097]

Bit more information…? What is not happening that should?

Maybe a couple pics?

[gwest_ca-(File Mod) 11,393]

[953 nut 59,268]

Do you have an electric lift or the manual lift on your 414-8? 

[oliver2-44 10,589]

[Handy Don 13,683]

Welcome to the Forum.

I'm sure the fine folks here will help you track down the issue and get you going.

[gwest_ca-(File Mod) 11,393]

Probably is an electric lift since this is posted in electrical. Did not notice that.

 

[Pullstart 65,886]

Michigander!

[Rucan 2]

On 11/11/2021 at 7:19 AM, 953 nut said:

Do you have an electric lift or the manual lift on your 414-8? 

I have electric lift.

 

[Rucan 2]

On 11/11/2021 at 9:57 AM, gwest_ca said:

Probably is an electric lift since this is posted in electrical. Did not notice that.

 

Thanks

[953 nut 59,268]

9 hours ago, Rucan said:

I have electric lift.

 

Take a look at the wiring drawing Garry @gwest_ca provided. Check all of those electrical connections to be sure they are tight and free of corrosion. Is your hour meter working? the relay for the lift uses the same power source as the hour meter. With the ignition off can you hear the relay close when the key is moved to the run position?

Hope this helps.

[Rucan 2]

14 minutes ago, 953 nut said:

Take a look at the wiring drawing Garry @gwest_ca provided. Check all of those electrical connections to be sure they are tight and free of corrosion. Is your hour meter working? the relay for the lift uses the same power source as the hour meter. With the ignition off can you hear the relay close when the key is moved to the run position?

Hope this helps.

I will check thanks