Jump to content
Mickwhitt

What did you do today?

Recommended Posts

8ntruck

I got the pontoon out to the boat dealer for the yearly engine service, shrink wrapping, ans winter storage today.  The winterization list is getting shorter.

  • Like 1

Share this post


Link to post
Share on other sites
 
Dan 312-8

Did some garage reorganizing, yes, you should have seen it before…

Put up the mower deck until the spring, cleaned, greased, and blades sharpened. Reassembled my new to me grader blade and reorganized my plows, seems I have a collection of them now…

IMG_1762.jpeg

IMG_1763.jpeg

  • Like 6
  • Excellent 3

Share this post


Link to post
Share on other sites
 
Bar Nuthin
7 minutes ago, Dan 312-8 said:

Did some garage reorganizing, yes, you should have seen it before…

Put up the mower deck until the spring, cleaned, greased, and blades sharpened. Reassembled my new to me grader blade and reorganized my plows, seems I have a collection of them now…

 

IMG_1763.jpeg

 

What's that large flat surface the tractors are setting on?  Seems to me like my garage used to have one of those, but I haven't seen it in a while. :ROTF:

  • Haha 5

Share this post


Link to post
Share on other sites
 
c-series don

@Dan 312-8 I was going to say “What are you in competition with @Sparky having three plows?” Then I realized that I have three too!! 

  • Haha 6

Share this post


Link to post
Share on other sites
 
ebinmaine
6 hours ago, c-series don said:

@Dan 312-8 I was going to say “What are you in competition with @Sparky having three plows?” Then I realized that I have three too!! 

 

I don't dare to count.....

  • Haha 1

Share this post


Link to post
Share on other sites
 
Ed Kennell
9 hours ago, c-series don said:

 three too!! 

Me three!

  • Like 2
  • Haha 1

Share this post


Link to post
Share on other sites
 
cleat

Not today but yesterday I installed my starlink dish to replace my old explornet satellite internet that was getting too slow and expensive.

The starlink is half the price and 5x the speed.

2070791073_Starlinkandcellantenna.JPG.c04fbf5fbec169370329c8b9bfe373b3.JPG

 

Also installed a heated bird bath for my flying friends.

336400581_Heatedbirdbath.JPG.d05361d7c761a01775575036bd41d55d.JPG

 

  • Excellent 4
  • Heart 1

Share this post


Link to post
Share on other sites
 
rjg854

@953 nut    Richard, I love the light-hearted, positive attitude, you have. Keep us informed when this will happen so we all can be praying for wisdom for the doctors, a successful surgery and a speedy recovery. 

  • Like 2
  • Heart 2

Share this post


Link to post
Share on other sites
 
Dan 312-8
15 hours ago, c-series don said:

@Dan 312-8 I was going to say “What are you in competition with @Sparky having three plows?” Then I realized that I have three too!! 

 

But, I only have two tractors...

 

You know what that means! Looking for that minty B-80 8-Speed to balance out the tractor to plow ratio.

  • Excellent 2
  • Haha 1

Share this post


Link to post
Share on other sites
 
peter lena

@Dan 312-8  nice job on the cleanout !  also have to complement you on the paint  condition  of your  units ! the deep reflexion , says it all , what do you do ? got a simple for you , on the blower chute end of rod  ,  use a 3/8  x 16  threaded die  nut , get a matching  screw  on knob  at  local , big box store , makes it  much easier  with gloves or mittens . have also  added a vinyl , PLASTIC SNOW  SLIDER ,  material gasket  on   chute base bottom , like PAM  FOOD  , NON STICK SPRAY , the difference in swing ease , amazing . walmart  regularly has that  snow slider in stock , just , cut out  what  you need , BTW  my grandson just got out of the marines , crew chief on C130J ,  flew the world .  pete    

Share this post


Link to post
Share on other sites
 
Sparky

  Prepping my Ariens walk behind for the winter. This one has that “power steering” feature and if you don’t lube the sleeve axle on the left wheel you lose use of this feature. 
 

IMG_9909.jpeg

 

IMG_9912.jpeg

 

IMG_9913.jpeg

 

IMG_9916.jpeg

 

IMG_9915.jpeg

 

  • Like 2
  • Excellent 1

Share this post


Link to post
Share on other sites
 
My_horse

Put some hooks on my GC2410 bucket. IMG_1765.jpeg.671e7aaae1522038f629f47674ab7124.jpeg

 

Got some wrenches out of my dad’s toolbox. He passed in ‘22.
 

Some are missing, but I know they’re up there in the garage somewhere.
 

Made a spot in my toolbox for them. Most of my stuff is metric, don’t really have much SAE.

 

IMG_1766.jpeg.342bac034017cb95677497597da103e1.jpegIMG_1770.jpeg.351bd21c361d96b5e6ed8b9e5409c041.jpeg

  • Like 3
  • Excellent 1

Share this post


Link to post
Share on other sites
 
8ntruck

Mrs 8n and I had our 6 month checkups today.  Doc tells us we are still alive.

 

We both got one more pill per day and a flue shot.

  • Like 2
  • Heart 2

Share this post


Link to post
Share on other sites
 
ebinmaine
6 hours ago, Dan 312-8 said:

 

But, I only have two tractors...

 

You know what that means! Looking for that minty B-80 8-Speed to balance out the tractor to plow ratio.

 

Ya know..... I hate to be all Captain Obvious here.... you COULD sell a plow.  

 

 

:ROTF:

 

 

 

Oh whattamm I even thinking  🤔 

 

  • Haha 2

Share this post


Link to post
Share on other sites
 
ebinmaine
1 hour ago, Sparky said:

Prepping my Ariens walk behind for the winter. This one has that “power steering” feature and if you don’t lube the sleeve axle on the left wheel you lose use of this feature. 

 

Excellent mo-chine sir. 

We have the 24" wide wicked powered version of em. 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
ebinmaine
10 hours ago, cleat said:

starlink

 

Trina has one. Very impressive so far. She bought the least expensive model and least expensive service just so we'd have it for being in the middle of nowhere and still having emergency contact. 

 

Share this post


Link to post
Share on other sites
 
peter lena

@Sparky  just curious  whats the spec on the sleeve axel set up ?  lubrication failures  are a regular  thing , my switch to , lucas , lubes , eliminated , bearing failures , like to know , pete

Share this post


Link to post
Share on other sites
 
SylvanLakeWH
19 minutes ago, ebinmaine said:

 

Ya know..... I hate to be all Captain Obvious here.... you COULD sell a plow.

 


:scared-eek:

  • Haha 2

Share this post


Link to post
Share on other sites
 
ebinmaine
4 minutes ago, SylvanLakeWH said:


:scared-eek:

 

 

I know. I know. 

 

Stoooopidd idea.  

  • Like 1
  • Haha 1

Share this post


Link to post
Share on other sites
 
Handy Don
1 hour ago, ebinmaine said:

Excellent mo-chine sir. 

We have the 24" wide wicked powered version of em. 

 

Mine is a 1975 with a 24” with a lowly 6hp Tecumseh but built like a tank!

  • Like 1

Share this post


Link to post
Share on other sites
 
Sparky
52 minutes ago, Handy Don said:

Mine is a 1975 with a 24” with a lowly 6hp Tecumseh but built like a tank!

 
 Those old Ariens units were awesome (and still are).

  • Like 1

Share this post


Link to post
Share on other sites
 
SylvanLakeWH

Built my latest ski bench with the patented "Drink Safe" ski binding beer can holder...:D

 

 

 

 

IMG_4527.jpeg

IMG_4526.jpeg

  • Like 5

Share this post


Link to post
Share on other sites
 
8ntruck

Modified a Marttiini knife sheath.  A couple three years ago, I treated myself to a Marttiini fixed blade medium utility camp knife.  I like the knife - comfortable handle, good blade shape, sharper than usual from the factory, stainless steel blade that seems to hold an edge.  Only thing is, I haven't used it a lot.  It recently dawned on me that I haven't used it because it is a right handed carry - the sheath is right handed.  I'm left handed.

 

I took a close look at the sheath and discovered that the belt loop was a seperate piece riveted on, and the rest of the sheath was symmetrical around the blade.  Tonight, I ground the rivets off, drilled new holes on the other side of the sheath and riveted the belt loop bach on the other side.  Granted, I covered up the neat Marttiini logo on the sheath, but the change made the knife more useful to me.  Besides, the knife is mass produced, not a collector's item - it is meant to work, not collect dust sitting on my dresser.

 

We will be spending a week or 10 days in our woods in the very near future.  I expect having that hanging at my left hip will come in handy.

 

 

  • Like 3
  • Excellent 2

Share this post


Link to post
Share on other sites
 
ebinmaine
8 hours ago, 8ntruck said:

it is meant to work, not collect dust sitting on my dresser.

 

Kinda like a Wheelhorse! 

 

:wh:

 

 

 

8 hours ago, 8ntruck said:

 I expect having that hanging at my left hip will come in handy.

 

I've been retraining myself that I have my new little flip pocket knife 🔪 to hand instead of in the truck/house/shop. 

Sure is nice...

 

 

Share this post


Link to post
Share on other sites
 
SylvanLakeWH

Spun my first souvenir baseball bat from a limb off the maple we had to cut down recently... neighbor makes baseballs, bats, footballs etc. on his lathe and is showing me how to do it!

 

I included a pic of the baseballs he makes. They even have the correct number of stitches!

 

 

IMG_4528.jpeg

IMG_4529.jpeg

  • Excellent 5

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...