Side shot Saturday... AND SUNDAY !

[kpinnc 18,082]

On 5/4/2026 at 2:10 PM, pfrederi said:

But I do not have a mission for her...

 

Drive her to the mailbox. So long as she gets occasionally exercise she will be happy. 

[MainelyWheelhorse 2,474]

 

I figured I’d kill two stones with one bird. Front end Friday and Side shot Saturday, and seat time. But I did it just in time to have it start raining.

 

[C100guy94 30]

4 hours ago, 953 nut said:

The WW-93 weights for a 953 / 1054 / GT-14 go for $ 300 a set or more, a bit over $ 1.60 a pound.

 

That's pretty sweet. 

[C100guy94 30]

22 minutes ago, MainelyWheelhorse said:

 

I figured I’d kill two stones with one bird. Front end Friday and Side shot Saturday, and seat time. But I did it just in time to have it start raining.

 

Very sharp rig. 

[rjg854 13,011]

7 hours ago, C100guy94 said:

Your the second person to mention that to me. I'm understanding this correctly there weights off a d series and are valued more ? Rarity the reasoning ? 

I still have a set from a 400 series I used to have but there plastic covered. With the wheel horse stamp in middle 

Came with a deck in great shape. 

The D series had the notch in them for the valve stem, because the stem was on the outside of the wheel, whereas the C series it is on the inside.

[squonk 46,335]

6 hours ago, Razorback said:

Wow!!! That is some serious weight.  

 

I have some Wheel Horse cast iron weights that mount in the ouside of the rear wheels. I haven't weighed them... do you know how yours compare? 

The regular WH rear weights weigh 60 lbs. ea. The 2 piece weights weigh 65 lbs. per half so 130 a side

[WHX?? 56,397]

1 hour ago, rjg854 said:

The D series had the notch in them for the valve stem, because the stem was on the outside of the wheel, whereas the C series it is on the inside.

I was gonna ask the diff Randy thank you. 

Edited 23 hours ago by WHX??

[Wishin4a416 2,572]

She doesn't get out in the sun much. 

[Wishin4a416 2,572]

Gear oil change today.