Jump to content
mmmmmdonuts

Hot Engine slowly dying after PTO engaged

Recommended Posts

mmmmmdonuts

I have a 1991 520h and I can mow for hours on end until I turn the tractor off and then restart it. The tractor restarts nice and easy warm but when I engage the PTO (mower deck) it slowly kills the engine. If I disengage the PTO it revs right back up. It is an electric clutch. I was thinking if it was a kill switch wrong I would imagine it would kill it a lot faster than allowing me to cycle on and off the PTO. Any thoughts? 

Share this post


Link to post
Share on other sites
 
lynnmor

Watch the governor, does it pull the carburetor fully open when the engine is dying?  If the throttle is open and the power is low, clean the carburetor.  If no improvement, check compression and adjust the valves.  It could be a loose valve seat and they can run pretty good and have near normal compression till it is too late for an easy repair.  

  • Like 1

Share this post


Link to post
Share on other sites
 
N3PUY

Check the battery voltage before and after engaging the PTO.  Low voltage will cause poor engine performance.  

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • 84Workhorse
      By 84Workhorse
      '97 520H for sale; Reason for selling; I bought it about 6 years ago when my GT-1800 engine died which I will be re-powering so I have too many tractors and something has to go.
      I can provide more information and pictures if needed.
      Details:
      All shown in pics included in the price. 998 hours; Engine is in good condition 48 in. mowing deck in sound condition, no rust through 42 in. SS snow blower, I used it twice in 5 years, tire chains go with it 42 in. snow blade sat in my storage shed for the last 35+ years. Rear axle bracket does not go with it b/c I have a tiller for my GT All lights and gauges work with the exception of the engine load gauge. The vacuum nipple is broken off.  
       
       














    • Chaz54
      By Chaz54
      Full set of NOS Wheel Horse Chrome Embossed Hubcaps for a 520H.
       
      Let me know if you have questions, need more information, pictures, etc.
       
      Buyer pays shipping. Located in Washington, MO 63090





    • Duramax7man7
      By Duramax7man7
      Very Solid tractor!

      Newer Agro Tires on Rear and Solid Front Turf Tires. Wheel Weights on rear. Fully Swapped Forward Swept axle off of 520h. I ran my 60" Deck on this tractor for over a year with no issues. 
      Deck it solid top to bottom with no rot and newer blades. Belt and Pulley are good to go! 
      She's just a little dusty and needs a cleaning. Can get a nice Seat a Tractor Supply. 
       
      $1175 OBO   -POOS

      (248) 9for3-8six3four Text or Call. I do not visit this site enough. God Bless. 

      NEW SEAT INSTALLED ON THIS TRACTOR! Started it up and ran it for a while yesterday... Forgot how nice this thing is. Tempting to keep it but it's time to send her one her way. GREAT TRACTOR! 


       


    • lsc1257
      By lsc1257
      I have a 1996 520H Wheel Horse for sale.  The tractor has just over 800 hours on it.  It comes with a 48 inch deck.  The deck is a 1995 and has over 1,500 hours on it, as it came brand new with my 312-8 that I sold several years ago.  This 520-H has the swept front axle so it can handle a 60 inch deck.  I just replaced the battery and the deck belt this summer.  The engine is a 20HP Onan and it starts right up but requires the full choke.  The transmission is an Eaton 1100-062, hydrostatic.  The deck is in rough shape but the spindles appear to be in good working order.  The right rear tire has some cracking.  The original operator's manual for the 520H is included, as is the original operating and maintenance instructions for the deck, plus the installation instructions for the deck.  Also included is a new PTO belt and several miscellaneous deck wheels and rollers.  Additional pictures available upon request.  Asking $500.



    • Joe Warren
      By Joe Warren
      Wheel Horse
      Service Tool Kit
      Onan Industrial Engines
      ON-420-0556
       
      Kit is missing oil filter tool, otherwise complete. Tools in excellent condition. Small crack in plastic case, bottom, middle. 
       
      $129 plus shipping cost.
       
      Message me if you are interested in purchasing. Thank you. Joe


×
×
  • Create New...