Jump to content
chsteinke44

212-h drive belt size and routing diahgram

By chsteinke44, in Transmissions and transaxles

Recommended Posts

chsteinke44    0

chsteinke44
Posted (edited)

i need help finding the right size drive belt for my 212-h wheel horse and the diagram for installing the belt.   i got the tractor from my wifes grampa and cant find the diagram for it or a replacement belt for it.  the id tag is 3212be01  46590

the belt i need is the motor to transmition

Edited by chsteinke44

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    12,283

gwest_ca
Posted

Don't know what deck you have so click on the pictures. The drive belt for each has been added to the page that comes up.

This is a 3-blade 36" width of cut deck

This is a 2-blade 37" width of cut deck

There is also a 30" single blade deck but don't see the belt just yet.

If you look at the parts lists for each deck the illustration should help you with belt installation.

Let us know if this helps or does not..

 

Garry

 

Share this post

Link to post
Share on other sites
 

chsteinke44    0

chsteinke44
Posted (edited)

i updated the post its for the trans drive belt, but thanks i have the 37", the snow blade and snow thrower for it.  i love thos little tracktor,  for being small it does alot of work

Edited by chsteinke44

Share this post

Link to post
Share on other sites
 

gwest_ca-(File Mod)    12,283

gwest_ca
Posted

We do not have original manuals for this one but the parts list illustration should help. Click on the picture

The belt bends backwards over flat idlers. Pay attention to any wire guides that keep the belt in the idler pulleys when the belt is loose. They are usually positioned so they just clear the belt when it is tight.

 

Garry

Share this post

Link to post
Share on other sites
 

chsteinke44    0

chsteinke44
Posted

i found thouse online its how the belt runs over the rear axle and how the two idler pullys, i dont know if i need to take anything off to get the belt on,  but thanks for the help you could get me

 

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • River Rat
      Belt number for the Mule Drive on a C145A (1984)
      By River Rat
      I am looking for the Wheel Horse part number for the Mule Drive belt on my 1984 C145A 11-14KE01. I believe it is 102742. The old one is stretched quite a bit and not sure the outside length. possibly 1/2 by 103 in? 48 inch mower. 
      Any help is appreciated!
       
       
       
       
       
       
       
       
       
       
       
       
       
    • cheesegrader
      foot pedal conversion for hydro drive
      By cheesegrader
      About a decade ago, I bought a conversion kit here to remove the column drive lever and convert to a foot pedal for a 520h.
      I would like to convert a second tractor, and I need to replace one of the linkage bars on the first one that has cracked, but I can't find the vendor any more.
      Does anyone remember who made this awesome mod, and where I can find them?
    • giant_g2
      8 spd Transmission for sale
      By giant_g2
      Not sure on specific model. This 8 spd came attached to a plow I bought. It had some water in it for a couple weeks according to the prior owner. I drained it, sloshed some diesel in it, drained that, then filled with fresh oil. Spinning the input shaft by hand, I can see the axels turn. Hasn't leaked any oil. I'm not really interested in shipping, so I'd prefer local sales.

    • jmack
      Xi V-Belt Size to Connect 60” Deck
      By jmack
      What’s the correct v-belt size for a xi drive belt connecting to a 60” deck?  
       
      Just shredded mine today. 
    • Doug B
      GT14
      By Doug B
      Hey guys,I have a dilemma I need some help with. I have a 1969 GT 14 that I replaced the transmission and pump on. For about 2 weeks afterward everything worked great, but while mowing at a pretty good pace I noticed a shudder and the tractor slowed a little but not bad. The more I rode it the slower it got until it barely moves. What stumps me is the hydraulics are still very strong,as in I can back the 3 point under the bumper of my truck and if you lift the arms all the way up the front wheels of the tractor will clear the ground. Have checked the tow valve and checked the internal filter,but no luck. I have also checked and replaced the forward and reverse bypass springs and the lever is moving the cam to full travel, forward and reverse. Any help would be appreciated.
×
×
  • Create New...