-
Similar Content
-
By rustyedge1
Selling cab as is and photo'd. Don't know how much of the frame work is original. Panels are used and torn in some places. Windows are fairly clear and solid. Paperwork is pretty shot but included. States fits C series tractors. Haven't tried the zippers or snaps. Fab work done by previous owner. PM any questions. 150.00 cash SOLD
Tried the zippers today 2-6-23 and they are working, little WD40 works wonders. SOLD
-
By wh315-8
10HP with 42” blade, C-85 w/cab & 42” Snow Blower, 315-8 w/Ark Loader. Ready for some snow ❄️. Last year had up to 14” in Ohio.
Snow cab windows were fogged up bad and I used MeGuires PlastX, this stuff was easy, apply like wax, rubbing it in and wipe off, amazing how it cleared that plastic window up.
-
By Jennifer
Well got my new weight yesterday! My valentines gift from my husband now has the front weight less likely to pop those wheelies!!!! There might be enough power still but doubt it…. He bought me the RJ from David in Arkansas a few years back we posted on the trip! The moment we saw the ad on here about the front weight we had to have it! Seize the moment, don’t know when ever come across another for sell…! So here I just wanted to share pictures of it! My tractor is a bit dirty from winter setting but i wipped it down just a little for the photo opt!!
-
By WVHillbilly520H
@WHX24, @PeacemakerJack, @ebinmaine, @JCM, @shallowwatersailor, @pullstart, @Horse Newbie, @elcamino/wheelhorse, @Ed Kennell, and the rest of RS ....
As I have mentioned before I would be getting snow removal tools for my Mahindra eMax 22, the whole package plow, blower and soft cab, I had purchased a Kubota set-up a couple years back with the intentions of modifying it to fit/work with it but after careful consideration decided just to sell it to help pay for the correct set-up built for Mahindra (by Berco in Canada), I ordered it the end of October and its showed at the dealer in PA right before Christmas and I just picked it up Friday, and today got the sub-frame (which both the plow and blower use so you can switch between with ease) assembled and mounting brackets installed on the tractor frame (the only thing I don't like is you have to switch these brackets back and forth between this and the mower deck mounts "not quite WH easy" but after a few times it may not be so bad ), then installed the sub-frame , snow plow and ran the hydraulic lines and plugged into the loader/sector valve. The cab and blower assembly will follow within the next few days/weeks. Pics and a little video of it in operation.
20210110_163214.mp4 -
By Blackhood Bill
Been on here looking for a manual for a snow cab, can't seem to find it so thought maybe someone could help. Attached is the ID to in the cab.
-