c-series don 10,446 #24701 Posted October 12 Today I did something I’ve been meaning to do for years. Take the transmission and hydraulic system out of this 416-H. I took out the wiring harness and might save the spindles and steering wheel. This tractor was given to me and was already in rough condition. I lent it to a buddy to use around his farm. He is not known for taking good care of his equipment, so that’s why I let him use this particular tractor. Well after a few years of use he called me and said it’s making a funny noise. I went there and listened to it, it was knocking like crazy. Checking the oil I found none on the stick. I was not surprised or mad because I knew this could happen with this guy. Luckily the transmission oil was full so I drove it around and it worked fine. I brought it back home a few months later and it sat in my back yard for a few more years. So I decided today was the day to finally do this and junk the rest. While I was working on it my granddaughter decided that she wanted to clean and work on her tractor too! I was absolutely thrilled to have her in the garage with me! ❤️ 3 8 13 Share this post Link to post Share on other sites
Bill D 2,343 #24702 Posted October 12 1 hour ago, c-series don said: Today I did something I’ve been meaning to do for years. Take the transmission and hydraulic system out of this 416-H. I took out the wiring harness and might save the spindles and steering wheel. This tractor was given to me and was already in rough condition. I lent it to a buddy to use around his farm. He is not known for taking good care of his equipment, so that’s why I let him use this particular tractor. Well after a few years of use he called me and said it’s making a funny noise. I went there and listened to it, it was knocking like crazy. Checking the oil I found none on the stick. I was not surprised or mad because I knew this could happen with this guy. Luckily the transmission oil was full so I drove it around and it worked fine. I brought it back home a few months later and it sat in my back yard for a few more years. So I decided today was the day to finally do this and junk the rest. While I was working on it my granddaughter decided that she wanted to clean and work on her tractor too! I was absolutely thrilled to have her in the garage with me! ❤️ That engine has some valuable parts. Carb, intake, muffler, ignition module, coil, stator. I hope you're planing to save some of that stuff. 3 Share this post Link to post Share on other sites
Lane Ranger 11,564 #24703 Posted October 12 Did a few things today. New wheel on my B-80 36 inch mower deck. working on a transmission to change on a RJ. Cracked the drive pulley but had a couple extras. Also put Schnacke recoil back on my new to me RJ. With one of the new 1 1/2 inch hex nuts i had made. 7/20 fine thread on both ends of the 1 1/2 inch long 7/8 hex nut. Made so you can turn it around and use again if the hex gets rounded by the three recoil fogs! 4 7 Share this post Link to post Share on other sites
Bill D 2,343 #24704 Posted October 12 The floor boards on the GT series seem to be thicker than the later Toro branded machines and less prone to bending. Might be worth saving 1 Share this post Link to post Share on other sites
Dan 312-8 221 #24705 Posted October 12 11 hours ago, c-series don said: Today I did something I’ve been meaning to do for years. Take the transmission and hydraulic system out of this 416-H. I took out the wiring harness and might save the spindles and steering wheel. This tractor was given to me and was already in rough condition. I lent it to a buddy to use around his farm. He is not known for taking good care of his equipment, so that’s why I let him use this particular tractor. Well after a few years of use he called me and said it’s making a funny noise. I went there and listened to it, it was knocking like crazy. Checking the oil I found none on the stick. I was not surprised or mad because I knew this could happen with this guy. Luckily the transmission oil was full so I drove it around and it worked fine. I brought it back home a few months later and it sat in my back yard for a few more years. So I decided today was the day to finally do this and junk the rest. While I was working on it my granddaughter decided that she wanted to clean and work on her tractor too! I was absolutely thrilled to have her in the garage with me! ❤️ No home is complete without at least (2) FELs! I think that C-195 pedal tractor is shines just as good as your C-175, adorable little helper! Back to the 416-H, what do the 950 rear tires look like? 3 Share this post Link to post Share on other sites
c-series don 10,446 #24706 Posted October 12 @Bill D Yes I was contemplating stripping the engine or just trying to hide the entire thing somewhere! As I said a few weeks ago though I am beginning to suffer from TMS Too Much Stuff in my life. Sometimes I look around and ask myself if I need all this stuff?!! It’s mostly Wheel Horse stuff and I have a hard time parting with things. It’s one of those things where I think if I get rid of it I’ll need it the following week! But I’m running out of space and don’t want a disorganized mess. Like most of us here I wish I had a big barn to neatly store everything in one location. @Dan 312-8 the rear tires are shot, one has an actual hole in the sidewall. 2 Share this post Link to post Share on other sites
ebinmaine 74,182 #24707 Posted October 12 6 minutes ago, c-series don said: big barn Game changer. Lucky for me Trina is a serious minimalist! 7 minutes ago, c-series don said: tires are shot, one has an actual hole in the sidewall Duct tape??!!?? 1 1 Share this post Link to post Share on other sites
WHX?? 52,676 #24708 Posted Monday at 02:41 AM 13 hours ago, c-series don said: mostly Wheel Horse stuff and I have a hard time parting with things. Psstt ... and your telling us??? Did you not see Lane's garage??? Gave a 55 RJ chassis a bath before washer goes bye bye for winter ... now if I could just get at the motor in this disorganized mess ... 6 1 2 Share this post Link to post Share on other sites
JoeM 8,702 #24709 Posted Thursday at 12:13 PM Gave this a second look today. Just not a Tecky guy, shame WH seat has a hole ate in it. 10 Share this post Link to post Share on other sites
WHX?? 52,676 #24710 Posted Thursday at 02:14 PM 2 hours ago, JoeM said: Just not a Tecky guy, Can you say repower? Sure I knew you could... 4 3 Share this post Link to post Share on other sites
kpinnc 15,370 #24711 Posted Thursday at 05:57 PM 3 hours ago, WHX?? said: Can you say repower? Just for inspiration... 6 3 1 Share this post Link to post Share on other sites
Lee1977 7,356 #24712 Posted Friday at 05:32 AM 15 hours ago, WHX?? said: Can you say repower? I think we can! 1 6 Share this post Link to post Share on other sites
sqrlgtr 841 #24713 Posted Friday at 10:56 PM Glued one of @rmaynard brake linings on today. Had an extra brake band and drum so didnt even have to take tractor out of line up for drying time . 6 1 Share this post Link to post Share on other sites
ebinmaine 74,182 #24714 Posted Friday at 10:58 PM Just now, sqrlgtr said: Had an extra ..... Nice to have spare parts around ehh?? 1 Share this post Link to post Share on other sites
PWL216 1,118 #24715 Posted Friday at 11:08 PM I put a magnetic cup holder on the 314. I’m resting now 🤪 3 1 6 Share this post Link to post Share on other sites
ebinmaine 74,182 #24716 Posted Friday at 11:22 PM 14 minutes ago, PWL216 said: I put a magnetic cup holder on the 314. I’m resting now 🤪 Good. Good. Don't get going too much.... Share this post Link to post Share on other sites
nylyon-(Admin) 8,203 #24717 Posted 14 hours ago Had my driveway repaved, the new driveway was several inches higher than the original so I needed to fill in with some top soil. Brought out the 416H hooked up the 17cu ft trailer and mover 10 yards of top soil and leveled out the driveway. Certainly back breaking work, but for the horse it was effortless. Times like this, wish I had a loader! 2 5 Share this post Link to post Share on other sites
ebinmaine 74,182 #24718 Posted 14 hours ago 6 minutes ago, nylyon said: Certainly back breaking work, but for the horse it was effortless. Times like this, wish I had a loader! Loaders are great! But remember your own muscle structure is "use it or lose it" Great exercise! 1 Share this post Link to post Share on other sites
8ntruck 8,101 #24719 Posted 10 hours ago Looks like a dump trailer and a belly blade would have been a good combination for that job. 1 Share this post Link to post Share on other sites
rmaynard 16,490 #24720 Posted 10 hours ago 4 hours ago, nylyon said: Times like this, wish I had a loader! I thought that I had hit the jackpot when my S-I-L got a Kubota with a loader. But back in February, my new next-door neighbor moved in. His final trip with his trailer revealed a Kubota with FEL and back-hoe. He said to me "if you ever need to use it, the keys are under the mat", or something like that. 1 Share this post Link to post Share on other sites
TonyToro Jr. 2,066 #24721 Posted 2 hours ago Picked up a C-120 auto with a snowplow and wheel weights today. Started to mess with it a bit but going to need some cleaning and a few battery cables and some good needed maintanece. Picked it up from the original owner and they were looking for the manuals and such but couldn’t seem to find them. Everything seems to be there. More to come soon. 1 4 Share this post Link to post Share on other sites
ebinmaine 74,182 #24722 Posted 1 hour ago 8 minutes ago, TonyToro Jr. said: C-120 auto 1976 or 77. Excellent find! What are the wheel weights? 1 Share this post Link to post Share on other sites
TonyToro Jr. 2,066 #24723 Posted 1 hour ago 7 minutes ago, ebinmaine said: 1976 or 77. Excellent find! What are the wheel weights? Not sure about the wheel weights. Will take some more pictures tommorow and make a separate thread. 1 Share this post Link to post Share on other sites
MainelyWheelhorse 1,944 #24724 Posted 1 hour ago (edited) Today I visually finished off my Frankenstein tractor. As I said in the updated Frankenstein thread, I bought some decals from Redo Your Horse (Terry) for the C-141 Auto. Edited 1 hour ago by MainelyWheelhorse 1 Share this post Link to post Share on other sites
