pfrederi 17,147 #14376 Posted January 25, 2022 9 minutes ago, cleat said: Sitting looking backwards is not too bad because there is a lot of room in that cab. Also when you are clearing 6' at a time it does not take very long. Biggest issue is the lack of a rear wiper so you have to get out and wipe off the back window occasionally. Nice setup, good way to move big snow. Thought of getting one for one of my bigger tractors...but twisting around to do it and my back would be in rebellion. (not to mention the cost!!)... heck I have a hard time turning around enough to back up a trailer... 1 Share this post Link to post Share on other sites
KrazeyOlDave 859 #14377 Posted January 25, 2022 How’s my rear end look…baby got back? 😂 1 2 3 Share this post Link to post Share on other sites
ebinmaine 63,211 #14378 Posted January 25, 2022 5 hours ago, KrazeyOlDave said: How’s my rear end look…baby got back? 😂 You seem to have some tractor stuck to your weights there. 1 4 Share this post Link to post Share on other sites
KrazeyOlDave 859 #14379 Posted January 25, 2022 I’ll tell ya, finding a good set of tire chains without spending a small fortune, is getting a bit crazy. These were $80 and found this issue while putting on the second one. I was so happy. 🤦🏼 6 Share this post Link to post Share on other sites
lynnmor 6,796 #14380 Posted January 25, 2022 1 hour ago, KrazeyOlDave said: I’ll tell ya, finding a good set of tire chains without spending a small fortune, is getting a bit crazy. These were $80 and found this issue while putting on the second one. I was so happy. 🤦🏼 Made in China I guess. Can you return them? I bought 4 tie down chains from a major supplier of those and found burrs on every link weld, I sent them back. I also ordered 4 binders, they sent 3 different designs and colors and they all were the next size larger, they went back as well. 3 Share this post Link to post Share on other sites
Ed Kennell 35,833 #14381 Posted January 25, 2022 3 hours ago, lynnmor said: Made in China I guess. For sure. Guess where my free home covid tests were made. They went into the round file. 5 1 Share this post Link to post Share on other sites
Horse Newbie 6,875 #14382 Posted January 25, 2022 3 minutes ago, Ed Kennell said: free home covid tests So I can expect my free three to come from Chicon ? Share this post Link to post Share on other sites
Ed Kennell 35,833 #14383 Posted January 25, 2022 1 minute ago, Horse Newbie said: So I can expect my free three to come from Chicon ? Check em out and let us know. Maybe you'll get lucky. Share this post Link to post Share on other sites
Horse Newbie 6,875 #14384 Posted January 25, 2022 16 minutes ago, Ed Kennell said: Check em out and let us know. Maybe you'll get lucky. I ordered mine from the U.S. Guvment… Made in U.S.A…. probably not . 1 Share this post Link to post Share on other sites
peter lena 8,072 #14385 Posted January 25, 2022 @Shynon nice looking set up , have any engine heat in that ? is that box on the blower the swivel actuator ? what did that cab come off of ? side door access looks friendly , pete 1 Share this post Link to post Share on other sites
johnnymag3 2,445 #14386 Posted January 25, 2022 (edited) Overseas manufacturing leaves a lot to be desired...This is why we are paying through the nose for all of our commodities, and also the reason our 12-14-16-18 carburetors are JUNK.....I cannot believe the way this country has gone....my Dad, his Dad....and me someday are are rolling in the grave crying Edited January 25, 2022 by johnnymag3 3 1 Share this post Link to post Share on other sites
Desko 552 #14387 Posted January 25, 2022 Was able to get the 416 out and throw a bit of snow after work today. There was more but some of it melted and made an ice layer on top but the blower ate ot right up. 8 3 Share this post Link to post Share on other sites
Shynon 7,435 #14388 Posted January 26, 2022 7 hours ago, peter lena said: @Shynon nice looking set up , have any engine heat in that ? is that box on the blower the swivel actuator ? what did that cab come off of ? side door access looks friendly , pete hood vents are inside the cab, get some heat, chute swivel under the box cover. I think it's a green machine 445 cab 1 Share this post Link to post Share on other sites
TJ5208 1,823 #14389 Posted January 26, 2022 got the 520-8 waxed up 6 1 Share this post Link to post Share on other sites
jamessparks 55 #14390 Posted January 26, 2022 Got to play a little. Working on making room for the next round. 🌨😊 7 2 Share this post Link to post Share on other sites
Ifixoldjunk 778 #14391 Posted January 26, 2022 (edited) @KrazeyOlDave How’s that spare fuel tank hooked up to that? That’s pretty good looking. Edited January 26, 2022 by Ifixoldjunk Share this post Link to post Share on other sites
Jeff-C175 7,195 #14392 Posted January 26, 2022 1 hour ago, Ifixoldjunk said: spare fuel tank I don't think it's fuel... well... engine fuel... I believe that it's a beer keg and the tap is on the dash. 5 Share this post Link to post Share on other sites
kpinnc 10,767 #14393 Posted January 26, 2022 6 minutes ago, Jeff-C175 said: don't think it's fuel... well... engine fuel... I believe that it's a beer keg and the tap is on the dash. Not a bad idea... Connect a 3 foot hose with a bite valve like bike riders use. 2 2 Share this post Link to post Share on other sites
ebinmaine 63,211 #14394 Posted January 26, 2022 3 minutes ago, kpinnc said: Not a bad idea... Connect a 3 foot hose with a bite valve like bike riders use. You do whatever makes you feel warm and fuzzy but as a hiker who has tried using those bite valves I'm telling you they're no fun. I like to be able to open something and pour it down my throat. 5 Share this post Link to post Share on other sites
kpinnc 10,767 #14395 Posted January 26, 2022 28 minutes ago, ebinmaine said: You do whatever makes you feel warm and fuzzy but as a hiker who has tried using those bite valves I'm telling you they're no fun. True, especially Camelbak brand. HydraPak is better. But they both might perform better if the beverage is slightly pressurized... 1 3 Share this post Link to post Share on other sites
Horse Newbie 6,875 #14396 Posted January 27, 2022 7 hours ago, jamessparks said: Got to play a little. Working on making room for the next round. 🌨😊 What year is that 520H @jamessparks ? Share this post Link to post Share on other sites
ebinmaine 63,211 #14397 Posted January 27, 2022 @WHX?? Ya jinxed me bubba. Got a few packages in the post over the last couple days. Found some UV light resistant zip ties. The BBT and I are planning our new garden tools. Got some attachment parts for Horses to implements. Working getting a dirt turning plow from @Mows4three. Also on the hunt for a ripper. Been wanting to get some things done on the C160 Automatic but it's been too damn cold ❄️🥶. No worries. Indoor shop time working on other projects. 3 1 Share this post Link to post Share on other sites
pfrederi 17,147 #14398 Posted January 27, 2022 1 hour ago, ebinmaine said: @WHX?? Ya jinxed me bubba. Got a few packages in the post over the last couple days. Found some UV light resistant zip ties. The BBT and I are planning our new garden tools. Got some attachment parts for Horses to implements. Working getting a dirt turning plow from @Mows4three. Also on the hunt for a ripper. Been wanting to get some things done on the C160 Automatic but it's been too damn cold ❄️🥶. No worries. Indoor shop time working on other projects. You know all those pics posted on here showing the WHs "rolling dirt"...you hardly ever see any rocks. Don't you have rocks??? 1 Share this post Link to post Share on other sites
ebinmaine 63,211 #14399 Posted January 27, 2022 10 minutes ago, pfrederi said: Don't you have rocks??? Absolutely. The new garden site has.... Less. When the excavator machine was here they took the largest rocks out. Trina and I will be using the ripper and people power to sort out as many as possible. 2 Share this post Link to post Share on other sites
pfrederi 17,147 #14400 Posted January 27, 2022 43 minutes ago, ebinmaine said: Absolutely. The new garden site has.... Less. When the excavator machine was here they took the largest rocks out. Trina and I will be using the ripper and people power to sort out as many as possible. Good Luck. My clay and rock mixture made a 40hp tractor and 2 bottom plow work a bit. But the real issue was trying to disc it. Two row 3 pt disc just bounced along on the rocks. even with 150lb weights on it. When you hear the local farmers with big stuff discing the screeching noises are major...My garden was a dig out and fill with imported material and now a bit raised... I would no expect miracles from a WH and mold board plow. and I doubt the small disc would do well unless there was a lot of manual rock removal. You might want to rent a rock hound and skid steer 1 Share this post Link to post Share on other sites
