We Got Us a Scalper!.....Lawn Ranger

[Dan693 510]

After de-cobbling the deck linkage on my LR from the prev owner I was able to mow a little and it cut lower than a new recruit at boot camp.

Anyone have ideas on raising the cut height on a 66 Lawn Ranger?

 

I still need to look at the manual but dont see too many options on raising the cut height.

Edited April 21, 2017 by Dan693
spelling edit

[pfrederi 17,147]

Did you move the rear deck wheels to the lowest bolt hole on the deck??

 

Edit:  Also if the holes in the ends of eh hanger straps or the tractor frame where they mount are wallowed out  it will hang low.  I had to drill out the frame holes and use bushings.  Had the hanger strap holes welded up and redrilled to size

Edited April 21, 2017 by pfrederi