Jump to content
deere173

312-H PTO belt

By deere173, in Wheel Horse Tractors

Recommended Posts

deere173    0

deere173
Posted

Hello again. I'm helping a friend with a problem with his 312-H tractor and 42 inch rear discharge mower deck.  We've done a lot of work on this machine in the last year and the last problem is that the pto belt, or deck drive belt, is wearing out pretty quickly.  This will be the second belt this summer.  I have tried every belt routing I can see as possible, including reversing the idler pulleys on the forward right side of the tractor frame. We are using belt #108834, 1/2' x 98".  Is this normal??

Share this post

Link to post
Share on other sites
 

N3PUY    1,031

N3PUY
Posted

WOW!   I've had the belt on mine forever.  How about some pictures of the belt at the PTO and the mule drive ( the idler pulleys on the forward right side of the tractor frame.  ) and at the deck.   Maybe someone will notice a problem.

 

Share this post

Link to post
Share on other sites
 

deere173    0

deere173
Posted

Thanks N3PUY.  I have ordered another belt and will post pictures when I install it.  The last one shredded and broke so i cant show the routing. The people on Redsquare are awesome!

Share this post

Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing

  • Similar Content

    • River Rat
      parts diagrahm 416H
      By River Rat
      model maybe a 41-160E01 with Onan Engine  Deck 1542SC03
    • davem1111
      Two PTO issues on GT-1848
      By davem1111
      I'm trying to figure out how to fix two problems: 
       
      1. Drive belt from PTO to deck keeps flipping over between the PTO and the mule.  Everything looks okay, belt runs right between mule and deck. It cuts just fine, but I'm concerned that running the belt on its back through the PTO will shorten its life a lot.
       
      2. PTO handle kicks off at random times while engaged. Not doing anything unusual, just cruising along mowing, and boom, it flips back.  Missing spring maybe?
       
      Any ideas?
    • RussAMC
      2 blade side discharge deck
      By RussAMC
      New to the forum, in fact never joined a forum of any kind before, so my apologies if I'm clumsy at this. I have aquired a 312-8 with a 2 blade deck and bagger. I believe it is a 37" but has been patched and painted and no longer has a id tag. I read previous posts on your forum stating that the mule drive with 1flat + 1 v pulley ( which is what I have ) required a v belt. Tractor had 6 sided belt that was pretty well shot and broke almost immediately. All pulleys on deck are v. Do I have the wrong mule drive ? Bought a v belt for it but seems like the idlers on the deck should be flat. Any help would be greatly appreciated thanks.
    • dj1096
      CG8 parts
      By dj1096
      I just bought my first couple of Wheel Horses, both running but in need of some TLC. Taking one on at a time, the one that is in the best condition is a CG8 1-0200 1 serial number 853213. I am looking for the deck belt or at least the correct size. the deck is a model 5-0701 6 serial no. 806358. any help would go a long way. LOL my wife is not to happy I bought mowers that II could not just jump on to and mow!!
    • coach717
      Coach needs some coaching (help)
      By coach717
      Newbie here I bought an old 1988 Wheel Horse 111-6 it's a rear engine. I picked this up for $75.00 Put a new ignition switch in cleaned the carb installed a new battery and it fired right up. Amazing! What I havent been able to do is keep the pto belt working so the deck cuts. Is there an adjustment I can make to help insure that the belt stays engaged? Help I don't want to use that walk behind mower!!!
      Thanks,
      Coach717 needs coaching
×
×
  • Create New...