elliot ness 1,916 #1 Posted August 25, 2016 I built a set of forks for the loader tractor. made them simple and easy to adjust side to side and to remove all hardware with 4 bolts on the side of the bucket. will let you know how they work at a later date. The cross rod is 7/8 in. cold rolled steel, and the forks are 1/2 x3 in.. and the square tubing is 1 1/2 x 3 in. I put 2 locking bolts on the square stock to hold the forks in place You can move the forks in or out where ever you need them. 15 Share this post Link to post Share on other sites
WNYPCRepair 1,923 #2 Posted August 25, 2016 I've been tossing ideas around on how to do this, your setup looks fairly simple. I'll be curious to see how well they lift 1 Share this post Link to post Share on other sites
SylvanLakeWH 28,499 #3 Posted August 25, 2016 look great! 1 Share this post Link to post Share on other sites
elliot ness 1,916 #4 Posted August 25, 2016 1 hour ago, SylvanLakeWH said: look great! Thanks SylvanLakeWH. Elliot. Share this post Link to post Share on other sites
Wheel-N-It 2,976 #5 Posted August 26, 2016 Elliot, I really really like that ! 1 Share this post Link to post Share on other sites
TIGman 2,006 #6 Posted August 26, 2016 Looking good!!! Very nice. 1 Share this post Link to post Share on other sites
Red144runner 658 #7 Posted August 26, 2016 Looks great. Rugged and simple 1 Share this post Link to post Share on other sites
Retired Wrencher 5,817 #8 Posted August 26, 2016 elliot ness I am sure that some of the members would like to see a short video of how this works. If you can I think we would like to see it. Nice set up. Enjoy. 4 Share this post Link to post Share on other sites