36" 7-1252 Tiller parts Questions

[LJCVT 1]

I have just purchased a 36" 7-1252 rototiller to go on the back of my 71-12K801 C-120 8 speed tractor.  The tiller came with the front idler assembly but I am missing the lift cable, the assist spring, the tension spring for the front idler and the rock shaft to lift the tiller.

 

Most of the stuff I can probably figure out but can anyone assist me with the length of the lift cable, the strength and size of the lift assist spring and also the length  and strength of the tension spring for the front idler assembly?

I have a dealer that has a lot of old wheel horse part but they are not labeled and I need to know the exact length of the cable to match it up to what he has.

 

The size of the correct drive belt would also be helpful.

 

Thanks from a new horse tiller owner..

 

[Racinbob 12,931]

This will help you out:

 

There are two vendors here that can help you out with the cable and lift assist spring.

[gwest_ca-(File Mod) 12,214]

Garry

[Bob Reed 2]

is a 7-1252 an older version of a 07-36TL-04, and are the mounting hardware to the tractor the same?  Trying to see if a 7-1252 will fit on a 1991 520H

[c-series don 11,876]

Yes it is, and the 7-1251 will fit on a 520.